Release 0.1.7

manpage: af_volnorm was renamed
vf: fix filter initialization error check
2013-09-20 21:33:32 +02:00 · 2013-09-20 21:33:32 +02:00 · 2013-09-20 21:33:32 +02:00 · 2013-09-20 21:33:32 +02:00 · 2013-09-20 21:33:32 +02:00 · 2013-09-20 21:33:32 +02:00
40 changed files with 427 additions and 282 deletions
@@ -313,12 +313,12 @@ Available filters are:
            channels 0 and 1 into output channel 2 (which could be sent to a
            subwoofer for example).

-        .. note::
+    .. note::

-            If you just want to force remixing to a certain output channel
-            layout, it is easier to use the ``force`` filter. For example,
-            ``mpv '--af=force=channels=5.1' '--channels=5.1'`` would always
-            force remixing audio to 5.1 and output it like this.
+        If you just want to force remixing to a certain output channel layout,
+        it is easier to use the ``force`` filter. For example,
+        ``mpv '--af=force=channels=5.1' '--channels=5.1'`` would always force
+        remixing audio to 5.1 and output it like this.

 ``sub[=fc:ch]``
    Adds a subwoofer channel to the audio stream. The audio data used for
@@ -438,7 +438,7 @@ Available filters are:

 ``drc[=method:target]``
    Applies dynamic range compression. This maximizes the volume by compressing
-    the audio signal's dynamic range.
+    the audio signal's dynamic range. (Formerly called ``volnorm``.)

    ``<method>``
        Sets the used method.
@@ -17,8 +17,8 @@ in the list. Suboptions are optional and can mostly be omitted.
 .. admonition:: Examples

    - ``--ao=alsa,oss,`` Try the ALSA driver, then the OSS driver, then others.
-    - ``--ao=alsa:noblock:device=hw=0.3`` Sets noblock-mode and the device-name
-      as first card, fourth device.
+    - ``--ao=alsa:no-block:device=[hw:0,3]`` Sets noblock-mode and the
+      device-name as first card, fourth device.

 Available audio output drivers are:

@@ -36,7 +36,7 @@ Available audio output drivers are:
        Set the name of the mixer element (default: ``Master``). This is for
        example ``PCM`` or ``Master``.
    ``mixer-index=<number>``
-        Set the index of the mixer channel (default: 0). Consider the output
+        Set the index of the mixer channel (default: 0). Consider the output of
        "``amixer scontrols``", then the index is the number that follows the
        name of the element.

@@ -48,6 +48,10 @@ Available audio output drivers are:

            ``--ao=alsa:device=[plug:surround50]``

+        Note that the ``[`` and ``]`` simply quote the device name. With some
+        shells (like zsh), you have to quote the option string to prevent the
+        shell from interpreting the brackets instead of passing them to mpv.
+
 ``oss``
    OSS audio output driver

@@ -27,7 +27,8 @@ General Changes for MPlayer to mplayer2
 * Use libass for subtitle rendering by default (better quality)
 * Generally preferring ffmpeg/libav over internal demuxers and decoders
 * Improvements when playing multiple files (``--fixed-vo``)
-* Screenshot improvements (instant screenshots without 1-frame delay)
+* Screenshot improvements (instant screenshots without 1-frame delay, allow
+  taking screenshots even with hardware decoding)
 * Improved support for PulseAudio
 * General code cleanups
 * Many more changes
@@ -55,6 +56,9 @@ General Changes for mplayer2 to mpv
  ``screenshot`` video filter is not needed anymore, and should not be put
  into the mpv config file)
 * Removal of teletext support
+* Removal of most builtin demuxers, using libavformat instead
+* Removal of builtin network support, using libavformat instead (also,
+  support https via libavformat)
 * Replace image VOs (``--vo=jpeg`` etc.) with ``--vo=image``
 * Do not lose settings when playing a new file in the same player instance
 * New location for config files, new name for the binary.
@@ -68,7 +72,35 @@ General Changes for mplayer2 to mpv
 * Wayland support
 * Support for precise scrolling which scales the parameter of commands. If the
  input doesn't support precise scrolling the scale factor stays 1.
-* General code cleanups
+* OSX: Cocoa event loop is independent from mplayer's event loop, so user
+  actions like accessing menus and live resizing do not block the playback.
+* OSX: Apple Remote support.
+* OSX: Media Keys support.
+* Windows: Added WASAPI audio output.
+* New OSD bar with chapter marks and not positioned in the middle of the video
+  (though this can be customized with the ``--osd-bar-align-y`` option).
+* Allow customizing whether a key binding for seeking shows the video time, the
+  OSD bar, or nothing (see section `Input Command Prefixes`_).
+* Display list of chapters and audio/subtitle tracks on OSD (see section
+  `Properties`_).
+* ``--keep-open`` option to stop the player from closing the window and
+  exiting after playback ends.
+* Re-enable screensaver while the player is paused.
+* Matroska edition switching at runtime.
+* Support for libavfilter (for video->video and audio->audio). This allows
+  using most of FFmpeg's filters, which improve greatly on the old MPlayer
+  filters in features, performance, and correctness.
+* Improved downmixing and output of surround audio. Instead of using hardcoded
+  pan filters to do remixing, use libavresample. Channel maps are used to
+  identify the channel layout, so e.g. ``3.0`` and ``2.1`` audio can be
+  distinguished.
+* Allow resuming playback at a later point with ``Shift+q``, also see
+  ``quit_watch_later`` input command.
+* Support mapping multiple commands to one key.
+* Allow changing/adjusting video filters at runtime. (This is also used to make
+  the ``D`` key insert vf_yadif if deinterlacing is not supported otherwise.)
+* General bug fixes and removal of long-standing issues
+* General code cleanups (including refactoring or rewrites of many parts)
 * Many more changes

 Detailed Listing of User-visible Changes
@@ -136,6 +168,8 @@ Command Line Switches
    ``-rawvideo ...``           ``--demuxer-rawvideo-...``
    ``--mixer``                 AO suboptions (``alsa``, ``oss``)
    ``--mixer-channel``         AO suboptions (``alsa``, ``oss``)
+    ``--ao=alsa:device=hw=0.3`` ``--ao=alsa:device=[hw:0,3]``
+    ``-af volnorm``             ``--af=drc`` (renamed)
    =========================== ========================================

 .. note::
@@ -149,8 +183,8 @@ input.conf and Slave Commands

    This lists only commands that are not always gracefully handled by the
    internal legacy translation layer. If an input.conf contains any legacy
-    commands, they will be displayed with ``-v`` when it is loaded, and show
-    and the replacement commands.
+    commands, a warning will be printed when starting the player. The warnings
+    also show the replacement commands.

    Properties containing ``_`` to separate words use ``-`` instead.

@@ -189,7 +223,7 @@ input.conf and Slave Commands
    +--------------------------------+----------------------------------------+
    | ``show_chapters``              | ``show_text ${chapter-list}``          |
    +--------------------------------+----------------------------------------+
-    | ``af_switch``, ``af_add``, ... | ``af [set|add|...]``                   |
+    | ``af_switch``, ``af_add``, ... | ``af set|add|...``                     |
    +--------------------------------+----------------------------------------+

 Other
@@ -35,7 +35,7 @@ Newlines always start a new binding. ``#`` starts a comment (outside of quoted
 string arguments). To bind commands to the ``#`` key, ``SHARP`` can be used.

 ``<key>`` is either the literal character the key produces (ASCII or Unicode
-character), or a symbol name.
+character), or a symbolic name (as printed by ``--input-keylist``).

 ``<section>`` (braced with ``{`` and ``}``) is the input section for this
 command.
@@ -326,6 +326,9 @@ should be replaced by properties), ``stop`` (questionable use), ``get_property``
 Input Command Prefixes
 ----------------------

+These prefixes are placed between key name and the actual command. Multiple
+prefixes can be specified. They are separated by whitespace.
+
 ``osd-auto`` (default)
    Use the default behavior for this command.
 ``no-osd``
@@ -390,7 +393,7 @@ Name                            W Comment
 ``speed``                       x see ``--speed``
 ``filename``                      currently played file (path stripped)
 ``path``                          currently played file (full path)
-``media-title``                   filename or libquvi ``QUVIPROP_PAGETITLE``
+``media-title``                   filename, title tag, or libquvi ``QUVIPROP_PAGETITLE``
 ``demuxer``
 ``stream-path``                   filename (full path) of stream layer filename
 ``stream-pos``                  x byte position in source stream
@@ -457,7 +460,7 @@ Name                            W Comment
 ``sub``                         x alias for ``sid``
 ``sub-delay``                   x see ``--sub-delay``
 ``sub-pos``                     x see ``--sub-pos``
-``sub-visibility``              x whether current subtitle is rendered
+``sub-visibility``              x see ``--sub-visibility``
 ``sub-forced-only``             x see ``--sub-forced-only``
 ``sub-scale``                   x subtitle font size multiplicator
 ``ass-use-margins``             x see ``--ass-use-margins``
@@ -471,7 +474,7 @@ Name                            W Comment
 ``playlist-pos``                  current position on playlist
 ``playlist-count``                number of total playlist entries
 ``playlist``                      playlist, current entry marked
-``track-list``                    list of audio/video/sub tracks, cur. entr. marked
+``track-list``                    list of audio/video/sub tracks, current entry marked
 ``chapter-list``                  list of chapters, current entry marked
 ``quvi-format``                 x see ``--quvi-format``
 ``af``                          x see ``--af``
@@ -12,9 +12,7 @@ a movie player
 ##############

 :Author: wm4
-:Date: 2013-07-08
 :Copyright: GPLv3
-:Version: git
 :Manual section: 1
 :Manual group: multimedia

@@ -34,7 +32,7 @@ SYNOPSIS
 | **mpv** \dvb://[card\_number@]channel [options]
 | **mpv** \mf://[filemask|\@listfile] [-mf options] [options]
 | **mpv** cdda://track[-endtrack][:speed][/device] [options]
-| **mpv** [file|mms[t]|http|httpproxy|rt[s]p|ftp|udp|smb]:// [user:pass\@]URL[:port] [options]
+| **mpv** [file|mms[t]|http|httpproxy|rt[s]p|ftp|udp|smb]://[user:pass\@]URL[:port] [options]


 DESCRIPTION
@@ -202,8 +200,7 @@ corresponding adjustment, or the software equalizer (``--vf=eq``).)
 7 and 8
    Adjust saturation.

-(The following keys are valid only when using the corevideo video output
-driver.)
+(The following keys are valid only on OSX.)

 command + 0
    Resize movie window to half its original size.
@@ -232,7 +229,7 @@ PREVIOUS and NEXT
    Seek backward/forward 1 minute.

 (The following keys are only valid if you compiled with TV or DVB input
-support and will take precedence over the keys defined above.)
+support.)

 h and k
    Select previous/next channel.
@@ -252,24 +249,6 @@ button 3 and button 4
 button 5 and button 6
    Decrease/increase volume.

-Joystick Control
----------------
-
-left and right
-    Seek backward/forward 10 seconds.
-
-up and down
-    Seek forward/backward 1 minute.
-
-button 1
-    Pause.
-
-button 2
-    Toggle OSD states: none / seek / seek + timer / seek + timer + total time.
-
-button 3 and button 4
-    Decrease/increase volume.
-

 USAGE
 =====
@@ -314,6 +293,8 @@ file1.mkv       ``--a --b --c``
 file2.mkv       ``--a --b --c``
 =============== ===========================

+(This is different from MPlayer and mplayer2.)
+
 Also, if any option is changed at runtime (via input commands), they are not
 reset when a new file is played.

@@ -408,7 +389,7 @@ profile name ``default`` to continue with normal options.
    ::

        [vo.vdpau]
-        # Use hardware decoding (this might break playback of some h264 files)
+        # Use hardware decoding (might break playback of some h264 files)
        hwdec=vdpau

        [protocol.dvd]
@@ -498,7 +479,7 @@ behavior of mpv.

 FFmpeg/Libav:
    This library accesses various environment variables. However, they are not
-    centrally documented, and documenting them is not our job. Therefore, the
+    centrally documented, and documenting them is not our job. Therefore, this
    list is incomplete.

    Notable environment variables:
@@ -601,13 +582,10 @@ FILES
 EXAMPLES OF MPV USAGE
 =====================

-Quickstart Blu-ray playing:
+Blu-ray playback:
    - ``mpv bd:////path/to/disc``
    - ``mpv bd:// --bluray-device=/path/to/disc``

-Quickstart DVD playing:
-    ``mpv dvd://1``
-
 Play in Japanese with English subtitles:
    ``mpv dvd://1 --alang=ja --slang=en``

@@ -643,6 +621,6 @@ mpv is a MPlayer fork based on mplayer2, which in turn is a fork of MPlayer.
 MPlayer was initially written by Arpad Gereoffy. See the ``AUTHORS`` file for
 a list of some of the many other contributors.

-MPlayer is (C) 2000-2012 The MPlayer Team
+MPlayer is (C) 2000-2013 The MPlayer Team

 This man page was written mainly by Gabucino, Jonas Jermann and Diego Biurrun.
@@ -69,8 +69,7 @@
    Specify a priority list of audio languages to use. Different container
    formats employ different language codes. DVDs use ISO 639-1 two-letter
    language codes, Matroska, MPEG-TS and NUT use ISO 639-2 three-letter
-    language codes, while OGM uses a free-form identifier. mpv prints the
-    available languages when run in verbose (``-v``) mode. See also ``--aid``.
+    language codes, while OGM uses a free-form identifier. See also ``--aid``.

    .. admonition:: Examples

@@ -183,7 +182,7 @@
    offset scale factor, not what the video filter chain or the video output
    use.

-``--ass-vsfilter-color-compat=<basic|full|force-601|no``
+``--ass-vsfilter-color-compat=<basic|full|force-601|no>``
    Mangle colors like (xy-)vsfilter do (default: basic). Historically, VSFilter
    was not colorspace aware. This was no problem as long as the colorspace
    used for SD video (BT.601) was used. But when everything switched to HD
@@ -249,8 +248,8 @@
    See ``--geometry`` for details how this is handled with multi-monitor
    setups.

-    Use ``--autofit-larger`` instead if you do not want the window to get
-    larger.
+    Use ``--autofit-larger`` instead if you just want to limit the maximum size
+    of the window, rather than always forcing a window size.

    Use ``--geometry`` if you want to force both window width and height to a
    specific size.
@@ -307,17 +306,6 @@
    out. This delay in reaction time to sudden A/V offsets should be the only
    side-effect of turning this option on, for all sound drivers.

-``--bandwidth=<bytes>``
-    Specify the maximum bandwidth for network streaming (for servers that are
-    able to send content in different bitrates). Useful if you want to watch
-    live streamed media behind a slow connection. With Real RTSP streaming, it
-    is also used to set the maximum delivery bandwidth allowing faster cache
-    filling and stream dumping.
-
-    .. note::
-
-        Probably broken/useless.
-
 ``--untimed``
    Do not sleep when outputting video frames. Useful for benchmarks when used
    with ``--no-audio.``
@@ -331,6 +319,10 @@
    Specify the Blu-ray disc location. Must be a directory with Blu-ray
    structure.

+    .. admonition:: Example
+
+        ``mpv bd:// --bluray-device=/path/to/bd/``
+
 ``--border``, ``--no-border``
    Play movie with window border and decorations. Since this is on by
    default, use ``--no-border`` to disable the standard window decorations.
@@ -357,7 +349,7 @@

 ``--cache-default=<kBytes|no>``
    Set the size of the cache in kilobytes (default: 320 KB). Using ``no``
-    will not automatically enable the cache e.h. when playing from a network
+    will not automatically enable the cache e.g. when playing from a network
    stream. Note that using ``--cache`` will always override this option.

 ``--cache-pause=<no|percentage>``
@@ -433,11 +425,6 @@
    libavcodec downmixes the audio into the requested number of channels if
    possible.

-    .. note::
-
-        This option is honored by codecs (AC-3 only), filters (surround) and
-        audio output drivers (OSS at least).
-
    The ``--channels`` option either takes a channel number or an explicit
    channel layout. Channel numbers refer to default layouts, e.g. 2 channels
    refer to stereo, 6 refers to 5.1.
@@ -446,6 +433,13 @@
    lists speaker names, which can be used to express arbitrary channel
    layouts (e.g. ``fl-fr-lfe`` is 2.1).

+    .. note::
+
+        Currently, this option is not very useful. The main effect of this
+        option is that automatic stereo downmixing is disabled. It depends
+        mainly on the selected audio output and the associated audio subsystem
+        how playback of files with surround audio will behave.
+
 ``--chapter=<start[-end]>``
    Specify which chapter to start playing at. Optionally specify which
    chapter to end playing at. Also see ``--start``.
@@ -584,7 +578,7 @@

    This is default in order to reduce latency when opening HTTP streams.

-``--demuxer-lavf-format=<value>``
+``--demuxer-lavf-format=<name>``
    Force a specific libavformat demuxer.

 ``--demuxer-lavf-genpts-mode=<auto|lavf|builtin|no>``
@@ -667,12 +661,14 @@

    .. admonition:: Example

-        - ``mpv sample-720x576.yuv --demuxer=rawvideo --demuxer-rawvideo=w=720:h=576``
-          Play a raw YUV sample.
+        Play a raw YUV sample::
+
+            mpv sample-720x576.yuv --demuxer=rawvideo \
+            --demuxer-rawvideo=w=720:h=576

 ``--demuxer-rawvideo-format=<value>``
    Colorspace (fourcc) in hex or string for ``--demuxer=rawvideo``
-    (default: YV12).
+    (default: ``YV12``).

 ``--demuxer-rawvideo-mp-format=<value>``
    Colorspace by internal video format for ``--demuxer=rawvideo``. Use
@@ -708,6 +704,10 @@
    also specify a directory that contains files previously copied directly
    from a DVD (with e.g. vobcopy).

+    .. admonition:: Example
+
+        ``mpv dvd:// --dvd-device=/path/to/dvd/``
+
 ``--dvd-speed=<speed>``
    Try to limit DVD speed (default: 0, no change). DVD base speed is 1385
    kB/s, so an 8x drive can read at speeds up to 11080 kB/s. Slower speeds
@@ -750,7 +750,7 @@

 ``--no-fixed-vo``, ``--fixed-vo``
    ``--no-fixed-vo`` enforces closing and reopening the video window for
-    multiple files (one (un)initialization for all files).
+    multiple files (one (un)initialization for each file).

 ``--flip``
    Flip image upside-down.
@@ -959,11 +959,7 @@
    See also ``--autofit`` and ``--autofit-larger`` for fitting the window into
    a given size without changing aspect ratio.

-``--grabpointer``, ``--no-grabpointer``
-    ``--no-grabpointer`` tells the player to not grab the mouse pointer after a
-    video mode change (``--vm``). Useful for multihead setups.
-
-``--heartbeat-cmd``
+``--heartbeat-cmd=<command>``
    Command that is executed every 30 seconds during playback via *system()* -
    i.e. using the shell. The time between the commands can be customized with
    the ``--heartbeat-interval`` option.
@@ -1027,7 +1023,10 @@

    .. admonition:: Example

-        ``mpv --http-header-fields='Field1: value1','Field2: value2' http://localhost:1234``
+        ::
+
+            mpv --http-header-fields='Field1: value1','Field2: value2' \
+            http://localhost:1234

        Will generate HTTP request::

@@ -1052,7 +1051,7 @@
    ``<api>`` can be one of the following:

    :no:        always use software decoding (default)
-    :vdpau:     works with nvidia drivers only, requires ``--vo=vdpau``
+    :vdpau:     requires ``--vo=vdpau`` (Linux only)
    :vda:       OSX
    :crystalhd: Broadcom Crystal HD

@@ -1307,8 +1306,9 @@
 ``--no-sub``
    Do not select any subtitle when the file is loaded.

-``--no-sub-visibility``
-    Disable display of subtitles, but still select and decode them.
+``--sub-visibility``, ``--no-sub-visibility``
+    Can be used to disable display of subtitles, but still select and decode
+    them.

 ``--no-video``
    Do not play video. With some demuxers this may not work. In those cases
@@ -1334,13 +1334,15 @@

 ``--osd-bar-align-x=<-1-1>``
    Position of the OSD bar. -1 is far left, 0 is centered, 1 is far right.
+    Fractional values (like 0.5) are allowed.

 ``--osd-bar-align-y=<-1-1>``
    Position of the OSD bar. -1 is top, 0 is centered, 1 is bottom.
+    Fractional values (like 0.5) are allowed.

 ``--osd-bar-w=<1-100>``
    Width of the OSD bar, in percentage of the screen width (default: 75).
-    A value of 0.5 means the bar is half the screen wide.
+    A value of 50 means the bar is half the screen wide.

 ``--osd-bar-h=<0.1-50>``
    Height of the OSD bar, in percentage of the screen height (default: 3.125).
@@ -1374,8 +1376,8 @@
    For example, ``#FF0000`` is red. This is similar to web colors.

    You can specify transparency by specifying an alpha value in the form
-    ``#AARRGGBB``. 0 is fully transparent, while ``FF`` is opaque (opaque is
-    default with the shorter color specification).
+    ``#AARRGGBB``. ``00`` is fully transparent, while ``FF`` is opaque (opaque
+    is default with the shorter color specification).

    .. admonition:: Examples

@@ -1480,7 +1482,7 @@

 ``--playing-msg=<string>``
    Print out a string after starting playback. The string is expanded for
-    properties, e.g. ``--playing-msg=file: ${filename}`` will print the string
+    properties, e.g. ``--playing-msg='file: ${filename}'`` will print the string
    ``file:`` followed by a space and the currently played filename.

    See `Property Expansion`_.
@@ -1611,6 +1613,8 @@
    Particularly useful on slow terminals or broken ones which do not properly
    handle carriage return (i.e. ``\r``).

+    Also see ``--really-quiet`` and ``--msglevel``.
+
 ``--quvi-format=<best|default|...>``
    Video format/quality that is directly passed to libquvi (default: ``best``).
    This is used when opening links to streaming sites like YouTube. The
@@ -1725,10 +1729,6 @@
        - ``--reset-on-next-file=""``
          Do not reset pause mode.

-``--reuse-socket``
-    (udp:// only)
-    Allows a socket to be reused by other processes as soon as it is closed.
-
 ``--saturation=<-100-100>``
    Adjust the saturation of the video signal (default: 0). You can get
    grayscale output with this option. Not supported by all video output
@@ -1752,12 +1752,12 @@
    multiple displays), this option tells mpv which screen to display the
    movie on.

-    This option does not always work. In these cases, try to use ``--geometry``
-    to position the window explicitly.
-
    .. admonition:: Note (X11)

-        This option does not work properly with all window managers.
+        This option does not work properly with all window managers. In these
+        cases, you can try to use ``--geometry`` to position the window
+        explicitly. It's also possible that the window manager provides native
+        features to control which screens application windows should use.

    See also ``--fs-screen``.

@@ -1872,8 +1872,7 @@
    Specify a priority list of subtitle languages to use. Different container
    formats employ different language codes. DVDs use ISO 639-1 two letter
    language codes, Matroska uses ISO 639-2 three letter language codes while
-    OGM uses a free-form identifier. mpv prints the available languages
-    when run in verbose (``-v``) mode. See also ``--sid``.
+    OGM uses a free-form identifier. See also ``--sid``.

    .. admonition:: Examples

@@ -1927,6 +1926,14 @@
    current level. With values below 100 the initial volume (which is 100%)
    will be above the maximum, which e.g. the OSD cannot display correctly.

+    .. admonition:: Note
+
+        The maximum value of ``--volume`` as well as the ``volume`` property
+        is always 100. Likewise, the volume OSD bar always goes from 0 to 100.
+        This means that with ``--softvol-max=200``, ``--volume=100`` sets
+        maximum amplification, i.e. amplify by 200%. The default volume (no
+        change in volume) will be ``50`` in this case.
+
 ``--speed=<0.01-100>``
    Slow down or speed up playback by the factor given as parameter.

@@ -1985,7 +1992,8 @@

 ``--stop-screensaver``, ``--no-stop-screensaver``
    Turns off the screensaver (or screen blanker and similar mechanisms) at
-    startup and turns it on again on exit (default: yes).
+    startup and turns it on again on exit (default: yes). The screensaver is
+    always reenabled when the player is paused.

    This is not supported on all video outputs or platforms. Sometimes it is
    implemented, but does not work (happens often on GNOME). You might be able
@@ -2032,8 +2040,8 @@
        - ``--subcp=latin2``
        - ``--subcp=cp1250``

-    If the player was compiled with ENCA support, you can use special syntax
-    to use that::
+    If the player was compiled with ENCA support, you can control it with the
+    following syntax::

        --subcp=enca:<language>:<fallback codepage>

@@ -2112,10 +2120,10 @@
    to fix the playback speed for frame-based subtitle formats. Works for
    external text subtitles only.

-    .. admonition:: Examples
+    .. admonition:: Example

-        - ``--sub-speed=25/23.976`` plays frame based subtitles which have been
-          loaded assuming a framerate of 23.976 at 25 FPS.
+        `--sub-speed=25/23.976`` plays frame based subtitles which have been
+        loaded assuming a framerate of 23.976 at 25 FPS.

 ``--sws=<n>``
    Specify the software scaler algorithm to be used with ``--vf=scale``. This
@@ -2157,7 +2165,9 @@
    .. warning::

        There is a danger of this causing significant CPU usage, depending on
-        the properties used and the window manager.
+        the properties used and the window manager. Changing the window title
+        is often a slow operation, and if the title changes every frame,
+        playback can be ruined.

 ``--tv=<option1:option2:...>``
    This option tunes various properties of the TV capture module. For
@@ -22,12 +22,9 @@ in the list. Suboptions are optional and can mostly be omitted.
 Available video output drivers are:

 ``xv`` (X11 only)
-    Uses the XVideo extension to enable hardware-accelerated playback. This is
+    Uses the XVideo extension to enable hardware-accelerated display. This is
    the most compatible VO on X, but may be low-quality, and has issues with
    OSD and subtitle display.
-    For information about what colorkey is used and how it is drawn, run
-    mpv with the ``-v`` option and look out for the lines tagged with ``[xv
-    common]`` at the beginning.

    ``adaptor=<number>``
        Select a specific XVideo adaptor (check xvinfo results).
@@ -265,7 +262,9 @@ Available video output drivers are:


        There are some more filters. For a complete list, pass ``help`` as
-        value, e.g.: ``mpv --vo=opengl:lscale=help``
+        value, e.g.::
+
+            mpv --vo=opengl:lscale=help

    ``lparam1=<value>``
        Set filter parameters. Ignored if the filter is not tunable. These are
@@ -609,8 +608,7 @@ Available video output drivers are:
    The following options are only useful if writing your own fragment programs.

    ``customprog=<filename>``
-        Load a custom fragment program from ``<filename>``. See
-        ``TOOLS/edgedect.fp`` for an example.
+        Load a custom fragment program from ``<filename>``.
    ``customtex=<filename>``
        Load a custom "gamma ramp" texture from ``<filename>``. This can be used
        in combination with ``yuv=4`` or with the ``customprog`` option.
@@ -44,8 +44,8 @@ SOURCES-$(LIBBS2B)              += audio/filter/af_bs2b.c
 SOURCES-$(LIBPOSTPROC)          += video/filter/vf_pp.c
 SOURCES-$(LIBSMBCLIENT)         += stream/stream_smb.c

-SOURCES-$(MACOSX_BUNDLE)        += osdep/macosx_bundle.m
 SOURCES-$(COCOA)                += video/out/cocoa_common.m \
+                                   osdep/macosx_bundle.m \
                                   osdep/macosx_application.m \
                                   osdep/macosx_events.m \
                                   osdep/ar/HIDRemote.m
@@ -294,11 +294,12 @@ DIRS =  . \
        audio/decode \
        audio/filter \
        audio/out \
-        core \
+        mpvcore \
        mpvcore/input \
        mpvcore/timeline \
        demux \
        osdep \
+        osdep/ar \
        stream \
        sub \
        video \
@@ -47,22 +47,26 @@ If you are running Mac OSX and using homebrew we provide [homebrew-mpv][homebrew
 to date formula that compiles mpv with sensible dependencies and defaults for
 OSX.

-configure --enable-* parameters
-------------------------------
+### configure `--enable-*` parameters

-The --enable-* parameters unconditionally force options on, completely
+The `--enable-*` parameters unconditionally force options on, completely
 skipping autodetection. This behavior is unlike what you may be used to from
 autoconf-based configure scripts that can decide to override you. This greater
 level of control comes at a price. You may have to provide the correct compiler
 and linker flags yourself.
+
 If you used one of these options and experience a compilation or
 linking failure, make sure you have passed the necessary compiler/linker flags
 to configure.

+mpv's configure script is greedy and automatically enables features as a result
+of autodetection. The cases where you may want to use `--enable-*` are very
+limited.
+
 Bug reports
 -----------

-Please use the [issue tracker][issue tracker] provided by GitHub to send us bug
+Please use the [issue tracker][issue-tracker] provided by GitHub to send us bug
 reports or feature requests.

 Contributing
@@ -75,9 +79,21 @@ make code review easier for both parties later on.
 Contacts
 --------

-You can find us on IRC in `#mpv-player` on `irc.freenode.net`
+These forms of contact are meant to ask questions about mpv usage, give
+feedback on mpv and discuss it's development.
+
+If possible, please avoid posting bugs here and use the [issue tracker][issue-tracker]
+instead.
+
+ - **Users IRC Channel**: `#mpv-player` on `irc.freenode.net`
+ - **Users Mailing List**: `mpv-users@googlegroups.com` ([Archive / Subscribe][mpv-users]).
+ - **Devel Mailing List**: `mpv-devel@googlegroups.com` ([Archive / Subscribe][mpv-devel])
+
+To contact the `mpv` team in private write to `mpv-team@googlegroups.com`.

 [changes]: https://github.com/mpv-player/mpv/blob/master/DOCS/man/en/changes.rst
 [mpv-build]: https://github.com/mpv-player/mpv-build
 [homebrew-mpv]: https://github.com/mpv-player/homebrew-mpv
-[issue tracker]:  https://github.com/mpv-player/mpv/issues
+[issue-tracker]:  https://github.com/mpv-player/mpv/issues
+[mpv-users]: https://groups.google.com/forum/?hl=en#!forum/mpv-users
+[mpv-devel]: https://groups.google.com/forum/?hl=en#!forum/mpv-devel
@@ -86,6 +86,7 @@
          <string>VCD</string>
          <string>VFW</string>
          <string>VOB</string>
+          <string>WEBM</string>
          <string>WMV</string>
          <string>asf</string>
          <string>avi</string>
@@ -119,6 +120,7 @@
          <string>vcd</string>
          <string>vfw</string>
          <string>vob</string>
+          <string>webm</string>
          <string>wmv</string>
        </array>
        <key>CFBundleTypeIconFile</key>
@@ -0,0 +1 @@
+0.1.7
@@ -389,13 +389,15 @@ static int decode_new_packet(struct sh_audio *sh)
    }
    int got_frame = 0;
    int ret = avcodec_decode_audio4(avctx, priv->avframe, &got_frame, &pkt);
-    if (ret > 0) {
+    // At least "shorten" decodes sub-frames, instead of the whole packet.
+    // At least "mpc8" can return 0 and wants the packet again next time.
+    if (ret >= 0) {
        ret = FFMIN(ret, mpkt->len); // sanity check against decoder overreads
        mpkt->buffer += ret;
        mpkt->len    -= ret;
        mpkt->pts = MP_NOPTS_VALUE; // don't reset PTS next time
    }
-    if (mpkt->len == 0 || ret <= 0) {
+    if (mpkt->len == 0 || ret < 0) {
        talloc_free(mpkt);
        priv->packet = NULL;
    }
@@ -99,6 +99,11 @@ static int control(struct af_instance* af, int cmd, void* arg)
    for(i = 1; i < af->data->nch; i++)
      s->buf[i] = (uint8_t *)s->buf[0] + i*s->sz*af->data->bps;

+    if (!s->filename) {
+        mp_msg(MSGT_AFILTER, MSGL_FATAL, "[export] No filename set.\n");
+        return AF_ERROR;
+    }
+
    // Init memory mapping
    s->fd = open(s->filename, O_RDWR | O_CREAT | O_TRUNC, 0640);
    mp_msg(MSGT_AFILTER, MSGL_INFO, "[export] Exporting to file: %s\n", s->filename);
@@ -232,6 +232,7 @@ static int init(struct ao *ao)
 {
    struct pa_sample_spec ss;
    struct pa_channel_map map;
+    pa_proplist *proplist = NULL;
    struct priv *priv = ao->priv;
    char *host = priv->cfg_host && priv->cfg_host[0] ? priv->cfg_host : NULL;
    char *sink = priv->cfg_sink && priv->cfg_sink[0] ? priv->cfg_sink : NULL;
@@ -298,16 +299,26 @@ static int init(struct ao *ao)

    if (!pa_sample_spec_valid(&ss)) {
        mp_msg(MSGT_AO, MSGL_ERR, "AO: [pulse] Invalid sample spec\n");
-        goto fail;
+        goto unlock_and_fail;
    }

    if (!select_chmap(ao, &map))
-        goto fail;
-
-    if (!(priv->stream = pa_stream_new(priv->context, "audio stream", &ss,
-                                       &map)))
        goto unlock_and_fail;

+    if (!(proplist = pa_proplist_new())) {
+        mp_msg(MSGT_AO, MSGL_ERR, "AO: [pulse] Failed to allocate proplist\n");
+        goto unlock_and_fail;
+    }
+    (void)pa_proplist_sets(proplist, PA_PROP_MEDIA_ROLE, "video");
+
+    if (!(priv->stream = pa_stream_new_with_proplist(priv->context,
+                                                     "audio stream", &ss,
+                                                     &map, proplist)))
+        goto unlock_and_fail;
+
+    pa_proplist_free(proplist);
+    proplist = NULL;
+
    pa_stream_set_state_callback(priv->stream, stream_state_cb, ao);
    pa_stream_set_write_callback(priv->stream, stream_request_cb, ao);
    pa_stream_set_latency_update_callback(priv->stream,
@@ -344,6 +355,10 @@ fail:
              && ao->probing))
            GENERIC_ERR_MSG(priv->context, "Init failed");
    }
+
+    if (proplist)
+        pa_proplist_free(proplist);
+
    uninit(ao, true);
    return -1;
 }
@@ -316,16 +316,15 @@ Optional features:
  --disable-bluray       disable Blu-ray support [autodetect]
  --disable-dvdread      disable libdvdread [autodetect]
  --disable-enca         disable ENCA charset oracle library [autodetect]
-  --enable-macosx-bundle enable Mac OS X bundle file locations [autodetect]
  --disable-pthreads     disable Posix threads support [autodetect]
  --disable-libass       disable subtitle rendering with libass [autodetect]
  --disable-libass-osd   disable OSD rendering with libass [autodetect]
  --enable-rpath         enable runtime linker path for extra libs [disabled]
  --disable-libpostproc  disable postprocess filter (vf_pp) [autodetect]
-  --disable-libavdevice  enable libavdevice demuxers [autodetect]
-  --disable-libavfilter  enable libavfilter [autodetect]
-  --disable-vf-lavfi     enable vf_lavfi libavfilter bridge [audodetect]
-  --disable-af-lavfi     enable af_lavfi libavfilter bridge [audodetect]
+  --disable-libavdevice  disable libavdevice demuxers [autodetect]
+  --disable-libavfilter  disable libavfilter [autodetect]
+  --disable-vf-lavfi     disable vf_lavfi libavfilter bridge [audodetect]
+  --disable-af-lavfi     disable af_lavfi libavfilter bridge [audodetect]

 Codecs:
  --enable-mng              enable MNG input support [autodetect]
@@ -474,7 +473,6 @@ _cdda=auto
 _coreaudio=auto
 _corevideo=auto
 _cocoa=auto
-_macosx_bundle=auto
 _enca=auto
 _pthreads=auto
 _ass=auto
@@ -708,8 +706,6 @@ for ac_option do
  --disable-corevideo) _corevideo=no ;;
  --enable-cocoa) _cocoa=yes ;;
  --disable-cocoa) _cocoa=no ;;
-  --enable-macosx-bundle) _macosx_bundle=yes ;;
-  --disable-macosx-bundle) _macosx_bundle=no ;;

  --enable-manpage) _build_man=yes ;;
  --disable-manpage) _build_man=no ;;
@@ -1547,19 +1543,6 @@ fi
 echores "$_sys_sysinfo"


-if darwin; then
-
-echocheck "Mac OS X Bundle file locations"
-def_macosx_bundle='#undef CONFIG_MACOSX_BUNDLE'
-test "$_macosx_bundle" = auto
-if test "$_macosx_bundle" = yes ; then
-  extra_ldflags="$extra_ldflags -headerpad_max_install_names"
-  def_macosx_bundle='#define CONFIG_MACOSX_BUNDLE 1'
-fi
-echores "$_macosx_bundle"
-
-fi #if darwin
-
 echocheck "pkg-config"
 if $($_pkg_config --version > /dev/null 2>&1); then
  if test "$_ld_static"; then
@@ -3079,7 +3062,6 @@ LIBQUVI = $_libquvi4
 LIBQUVI9 = $_libquvi9
 LIBGUESS = $_libguess
 LIRC = $_lirc
-MACOSX_BUNDLE = $_macosx_bundle
 MNG = $_mng
 MPG123 = $_mpg123
 OPENAL = $_openal
@@ -3165,7 +3147,6 @@ $def_termios
 $def_dl
 $def_dos_paths
 $def_iconv
-$def_macosx_bundle
 $def_priority


@@ -77,12 +77,12 @@ const demuxer_desc_t *const demuxer_list[] = {
 #endif
    &demuxer_desc_matroska,
    &demuxer_desc_lavf,
-    &demuxer_desc_subreader,
+    &demuxer_desc_mf,
 #ifdef CONFIG_MNG
    &demuxer_desc_mng,
 #endif
-    // auto-probe last, because it checks file-extensions only
-    &demuxer_desc_mf,
+    // Pretty aggressive, so should be last.
+    &demuxer_desc_subreader,
    /* Please do not add any new demuxers here. If you want to implement a new
     * demuxer, add it to libavformat, except for wrappers around external
     * libraries and demuxers requiring binary support. */
@@ -466,7 +466,7 @@ struct demux_packet *demux_read_packet(struct sh_stream *sh)
 // packets from the queue.
 double demux_get_next_pts(struct sh_stream *sh)
 {
-    if (sh) {
+    if (sh && sh->ds->selected) {
        ds_get_packets(sh);
        if (sh->ds->head)
            return sh->ds->head->pts;
@@ -863,12 +863,31 @@ static void demux_seek_lavf(demuxer_t *demuxer, float rel_seek_secs,
        // API by default, because there are some major issues.
        // Set max_ts==ts, so that demuxing starts from an earlier position in
        // the worst case.
-        int r = avformat_seek_file(priv->avfc, -1, INT64_MIN,
-                                   priv->last_pts, priv->last_pts, avsflags);
+        // To make this horrible situation even worse, some lavf demuxers have
+        // broken timebase handling (everything that uses
+        // ff_subtitles_queue_seek()), and always uses the stream timebase. So
+        // we use the timebase and stream index of the first enabled stream
+        // (i.e. a stream which can participate in seeking).
+        int stream_index = -1;
+        AVRational time_base = {1, AV_TIME_BASE};
+        for (int n = 0; n < priv->num_streams; n++) {
+            struct sh_stream *stream = priv->streams[n];
+            AVStream *st = priv->avfc->streams[n];
+            if (stream && st->discard != AVDISCARD_ALL) {
+                stream_index = n;
+                time_base = st->time_base;
+                break;
+            }
+        }
+        int64_t pts = priv->last_pts;
+        if (pts != AV_NOPTS_VALUE)
+            pts = pts / (double)AV_TIME_BASE * av_q2d(av_inv_q(time_base));
+        int r = avformat_seek_file(priv->avfc, stream_index, INT64_MIN,
+                                   pts, pts, avsflags);
        // Similar issue as in the normal seeking codepath.
        if (r < 0) {
-            avformat_seek_file(priv->avfc, -1, INT64_MIN,
-                               priv->last_pts, INT64_MAX, avsflags);
+            avformat_seek_file(priv->avfc, stream_index, INT64_MIN,
+                               pts, INT64_MAX, avsflags);
        }
    }
 }
@@ -188,7 +188,7 @@ typedef struct mkv_demuxer {

    uint64_t skip_to_timecode;
    int v_skip_to_keyframe, a_skip_to_keyframe;
-    bool subtitle_preroll;
+    int subtitle_preroll;
 } mkv_demuxer_t;

 #define REALHEADER_SIZE    16
@@ -196,6 +196,10 @@ typedef struct mkv_demuxer {
 #define RAPROPERTIES4_SIZE 56
 #define RAPROPERTIES5_SIZE 70

+// Maximum number of subtitle packets that are accepted for pre-roll.
+// (Subtitle packets added before first A/V keyframe packet is found with seek.)
+#define NUM_SUB_PREROLL_PACKETS 500
+
 /**
 * \brief ensures there is space for at least one additional element
 * \param array array to grow
@@ -2266,7 +2270,17 @@ static int handle_block(demuxer_t *demuxer, struct block_info *block_info)
        if (mkv_d->v_skip_to_keyframe)
            use_this_block = 0;
    } else if (track->type == MATROSKA_TRACK_SUBTITLE) {
-        use_this_block |= mkv_d->subtitle_preroll;
+        if (!use_this_block && mkv_d->subtitle_preroll)
+            use_this_block = 1;
+        if (use_this_block) {
+            if (mkv_d->subtitle_preroll) {
+                mkv_d->subtitle_preroll--;
+            } else {
+                // This could overflow the demuxer queue.
+                if (mkv_d->a_skip_to_keyframe || mkv_d->v_skip_to_keyframe)
+                    use_this_block = 0;
+            }
+        }
        if (use_this_block) {
            if (laces > 1) {
                mp_msg(MSGT_DEMUX, MSGL_WARN, "[mkv] Subtitles use Matroska "
@@ -2313,7 +2327,7 @@ static int handle_block(demuxer_t *demuxer, struct block_info *block_info)
        if (stream->type == STREAM_VIDEO) {
            mkv_d->v_skip_to_keyframe = 0;
            mkv_d->skip_to_timecode = 0;
-            mkv_d->subtitle_preroll = false;
+            mkv_d->subtitle_preroll = 0;
        } else if (stream->type == STREAM_AUDIO)
            mkv_d->a_skip_to_keyframe = 0;

@@ -2557,7 +2571,7 @@ static struct mkv_index *seek_with_cues(struct demuxer *demuxer, int seek_id,

    if (index) {        /* We've found an entry. */
        uint64_t seek_pos = index->filepos;
-        if (mkv_d->subtitle_preroll) {
+        if (flags & SEEK_SUBPREROLL) {
            uint64_t prev_target = 0;
            for (int i = 0; i < mkv_d->num_indexes; i++) {
                if (seek_id < 0 || mkv_d->indexes[i].tnum == seek_id) {
@@ -2594,7 +2608,9 @@ static void demux_mkv_seek(demuxer_t *demuxer, float rel_seek_secs,
                a_tnum = track->tnum;
        }
    }
-    mkv_d->subtitle_preroll = (flags & SEEK_SUBPREROLL) && st_active[STREAM_SUB];
+    mkv_d->subtitle_preroll = NUM_SUB_PREROLL_PACKETS;
+    if (!st_active[STREAM_SUB] || !st_active[STREAM_VIDEO])
+        flags &= ~SEEK_SUBPREROLL;
    if (!(flags & (SEEK_BACKWARD | SEEK_FORWARD))) {
        if (flags & SEEK_ABSOLUTE || rel_seek_secs < 0)
            flags |= SEEK_BACKWARD;
@@ -2623,14 +2639,13 @@ static void demux_mkv_seek(demuxer_t *demuxer, float rel_seek_secs,
        if (!index)
            stream_seek(demuxer->stream, old_pos);

-        if (st_active[STREAM_VIDEO])
-            mkv_d->v_skip_to_keyframe = 1;
+        mkv_d->v_skip_to_keyframe = st_active[STREAM_VIDEO];
+        mkv_d->a_skip_to_keyframe = st_active[STREAM_AUDIO];
        if (flags & SEEK_FORWARD)
            mkv_d->skip_to_timecode = target_timecode;
        else
            mkv_d->skip_to_timecode = index ? index->timecode * mkv_d->tc_scale
                                            : 0;
-        mkv_d->a_skip_to_keyframe = 1;

        demux_mkv_fill_buffer(demuxer);
    } else if ((demuxer->movi_end <= 0) || !(flags & SEEK_ABSOLUTE))
@@ -2666,10 +2681,9 @@ static void demux_mkv_seek(demuxer_t *demuxer, float rel_seek_secs,
        mkv_d->cluster_end = 0;
        stream_seek(s, index->filepos);

-        if (st_active[STREAM_VIDEO])
-            mkv_d->v_skip_to_keyframe = 1;
+        mkv_d->v_skip_to_keyframe = st_active[STREAM_VIDEO];
+        mkv_d->a_skip_to_keyframe = st_active[STREAM_AUDIO];
        mkv_d->skip_to_timecode = index->timecode * mkv_d->tc_scale;
-        mkv_d->a_skip_to_keyframe = 1;

        demux_mkv_fill_buffer(demuxer);
    }
@@ -35,6 +35,7 @@

 struct priv {
    int frame_size;
+    int read_frames;
    double frame_rate;
 };

@@ -107,6 +108,7 @@ static int demux_rawaudio_open(demuxer_t *demuxer, enum demux_check check)
    *p = (struct priv) {
        .frame_size = samplesize * sh_audio->channels.num,
        .frame_rate = samplerate,
+        .read_frames = samplerate,
    };

    return 0;
@@ -191,6 +193,7 @@ static int demux_rawvideo_open(demuxer_t *demuxer, enum demux_check check)
    *p = (struct priv) {
        .frame_size = imgsize,
        .frame_rate = fps,
+        .read_frames = 1,
    };

    return 0;
@@ -203,7 +206,7 @@ static int raw_fill_buffer(demuxer_t *demuxer)
    if (demuxer->stream->eof)
        return 0;

-    struct demux_packet *dp = new_demux_packet(p->frame_size);
+    struct demux_packet *dp = new_demux_packet(p->frame_size * p->read_frames);
    dp->pos = stream_tell(demuxer->stream) - demuxer->movi_start;
    dp->pts = (dp->pos  / p->frame_size) / p->frame_rate;

@@ -1341,6 +1341,8 @@ static int d_open_file(struct demuxer *demuxer, enum demux_check check)
    if (!res)
        return -1;

+    demuxer->filetype = sr.name;
+
    sub_data *sd = sub_read_file(demuxer->stream, &sr);
    if (!sd)
        return -1;
@@ -1269,6 +1269,8 @@ static struct cmd_bind *find_any_bind_for_key(struct input_ctx *ictx,
        struct active_section *s = &ictx->active_sections[i];
        struct cmd_bind *bind = find_bind_for_key_section(ictx, s->name, n, keys);
        if (bind) {
+            if (bind->is_builtin && !ictx->default_bindings)
+                goto skip;
            struct cmd_bind_section *bs = bind->owner;
            for (int x = 0; x < n; x++) {
                if (MP_KEY_DEPENDS_ON_MOUSE_POS(keys[x]) && bs->mouse_area_set &&
@@ -651,6 +651,7 @@ const m_option_type_t m_option_type_double = {
    .pretty_print = print_double_f3,
    .copy  = copy_opt,
    .clamp = clamp_double,
+    .add = add_double,
 };

 #undef VAL
@@ -628,9 +628,11 @@ static void mk_config_dir(char *subdir)
 {
    void *tmp = talloc_new(NULL);
    char *confdir = talloc_steal(tmp, mp_find_user_config_file(""));
-    if (subdir)
-        confdir = mp_path_join(tmp, bstr0(confdir), bstr0(subdir));
-    mkdir(confdir, 0777);
+    if (confdir) {
+        if (subdir)
+            confdir = mp_path_join(tmp, bstr0(confdir), bstr0(subdir));
+        mkdir(confdir, 0777);
+    }
    talloc_free(tmp);
 }

@@ -739,12 +741,12 @@ static void load_per_output_config(m_config_t *conf, char *cfg, char *out)
 * Tries to load a config file (in file local mode)
 * @return 0 if file was not found, 1 otherwise
 */
-static int try_load_config(m_config_t *conf, const char *file)
+static int try_load_config(m_config_t *conf, const char *file, bool local)
 {
    if (!mp_path_exists(file))
        return 0;
    mp_tmsg(MSGT_CPLAYER, MSGL_INFO, "Loading config '%s'\n", file);
-    m_config_parse_config_file(conf, file, M_SETOPT_BACKUP);
+    m_config_parse_config_file(conf, file, local ? M_SETOPT_BACKUP : 0);
    return 1;
 }

@@ -767,14 +769,14 @@ static void load_per_file_config(m_config_t *conf, const char * const file,
        char dircfg[MP_PATH_MAX];
        strcpy(dircfg, cfg);
        strcpy(dircfg + (name - cfg), "mpv.conf");
-        try_load_config(conf, dircfg);
+        try_load_config(conf, dircfg, true);

-        if (try_load_config(conf, cfg))
+        if (try_load_config(conf, cfg, true))
            return;
    }

    if ((confpath = mp_find_user_config_file(name)) != NULL) {
-        try_load_config(conf, confpath);
+        try_load_config(conf, confpath, true);

        talloc_free(confpath);
    }
@@ -867,6 +869,8 @@ void mp_write_watch_later_conf(struct MPContext *mpctx)
    if (!conffile)
        goto exit;

+    mp_msg(MSGT_CPLAYER, MSGL_INFO, "Saving state.\n");
+
    FILE *file = fopen(conffile, "wb");
    if (!file)
        goto exit;
@@ -888,8 +892,10 @@ exit:
 static void load_playback_resume(m_config_t *conf, const char *file)
 {
    char *fname = get_playback_resume_config_filename(file);
-    if (fname) {
-        try_load_config(conf, fname);
+    if (fname && mp_path_exists(fname)) {
+        // Never apply the saved start position to following files
+        m_config_backup_opt(conf, "start");
+        try_load_config(conf, fname, false);
        unlink(fname);
    }
    talloc_free(fname);
@@ -1787,7 +1793,7 @@ static void reset_subtitles(struct MPContext *mpctx)
    osd_changed(mpctx->osd, OSDTYPE_SUB);
 }

-static void update_subtitles(struct MPContext *mpctx, double refpts_tl)
+static void update_subtitles(struct MPContext *mpctx)
 {
    struct MPOpts *opts = mpctx->opts;
    if (!(mpctx->initialized_flags & INITIALIZED_SUB))
@@ -1806,7 +1812,7 @@ static void update_subtitles(struct MPContext *mpctx, double refpts_tl)

    mpctx->osd->video_offset = track->under_timeline ? mpctx->video_offset : 0;

-    double refpts_s = refpts_tl - mpctx->osd->video_offset;
+    double refpts_s = mpctx->playback_pts - mpctx->osd->video_offset;
    double curpts_s = refpts_s + opts->sub_delay;

    if (!track->preloaded) {
@@ -2788,8 +2794,6 @@ static bool redraw_osd(struct MPContext *mpctx)
    if (vo_redraw_frame(vo) < 0)
        return false;

-    if (mpctx->sh_video)
-        update_subtitles(mpctx, mpctx->sh_video->pts);
    draw_osd(mpctx);

    vo_flip_page(vo, 0, -1);
@@ -3509,7 +3513,7 @@ static void run_playloop(struct MPContext *mpctx)
        mpctx->video_pts = sh_video->pts;
        mpctx->last_vo_pts = mpctx->video_pts;
        mpctx->playback_pts = mpctx->video_pts;
-        update_subtitles(mpctx, sh_video->pts);
+        update_subtitles(mpctx);
        update_osd_msg(mpctx);
        draw_osd(mpctx);

@@ -3596,11 +3600,10 @@ static void run_playloop(struct MPContext *mpctx)
        }
        mpctx->playback_pts = a_pos;
        print_status(mpctx);
-
-        if (!mpctx->sh_video)
-            update_subtitles(mpctx, a_pos);
    }

+    update_subtitles(mpctx);
+
    /* It's possible for the user to simultaneously switch both audio
     * and video streams to "disabled" at runtime. Handle this by waiting
     * rather than immediately stopping playback due to EOF.
@@ -4149,6 +4152,19 @@ static void play_current_file(struct MPContext *mpctx)

    mpctx->add_osd_seek_info &= OSD_SEEK_INFO_EDITION;

+    if (opts->reset_options) {
+        for (int n = 0; opts->reset_options[n]; n++) {
+            const char *opt = opts->reset_options[n];
+            if (opt[0]) {
+                if (strcmp(opt, "all") == 0) {
+                    m_config_backup_all_opts(mpctx->mconfig);
+                } else {
+                    m_config_backup_opt(mpctx->mconfig, opt);
+                }
+            }
+        }
+    }
+
    load_per_protocol_config(mpctx->mconfig, mpctx->filename);
    load_per_extension_config(mpctx->mconfig, mpctx->filename);
    load_per_file_config(mpctx->mconfig, mpctx->filename, opts->use_filedir_conf);
@@ -4166,17 +4182,6 @@ static void play_current_file(struct MPContext *mpctx)
    load_per_file_options(mpctx->mconfig, mpctx->playlist->current->params,
                          mpctx->playlist->current->num_params);

-    if (opts->reset_options) {
-        for (int n = 0; opts->reset_options[n]; n++) {
-            const char *opt = opts->reset_options[n];
-            if (strcmp(opt, "all") == 0) {
-                m_config_backup_all_opts(mpctx->mconfig);
-            } else {
-                m_config_backup_opt(mpctx->mconfig, opt);
-            }
-        }
-    }
-
    // We must enable getch2 here to be able to interrupt network connection
    // or cache filling
    if (opts->consolecontrols && !opts->slave_mode) {
@@ -550,7 +550,7 @@ const m_option_t mp_opts[] = {
                {"auto", SOFTVOL_AUTO})),
    OPT_FLOATRANGE("softvol-max", softvol_max, 0, 10, 10000),
    OPT_INTRANGE("volstep", volstep, 0, 0, 100),
-    OPT_FLOATRANGE("volume", mixer_init_volume, 0, -1, 10000),
+    OPT_FLOATRANGE("volume", mixer_init_volume, 0, -1, 100),
    OPT_CHOICE("mute", mixer_init_mute, M_OPT_OPTIONAL_PARAM,
               ({"auto", -1},
                {"no", 0},
@@ -40,12 +40,13 @@

 #if defined(__MINGW32__)
 #include <windows.h>
+#include <shlobj.h>
 #elif defined(__CYGWIN__)
 #include <windows.h>
 #include <sys/cygwin.h>
 #endif

-#ifdef CONFIG_MACOSX_BUNDLE
+#ifdef CONFIG_COCOA
 #include "osdep/macosx_bundle.h"
 #endif

@@ -53,7 +54,7 @@
 typedef char *(*lookup_fun)(const char *);
 static const lookup_fun config_lookup_functions[] = {
    mp_find_user_config_file,
-#ifdef CONFIG_MACOSX_BUNDLE
+#ifdef CONFIG_COCOA
    get_bundled_path,
 #endif
    mp_find_global_config_file,
@@ -77,10 +78,24 @@ char *mp_find_config_file(const char *filename)
 char *mp_find_user_config_file(const char *filename)
 {
    char *homedir = NULL, *buff = NULL;
+    char *homepath = NULL;
 #ifdef __MINGW32__
-    static char *config_dir = "mpv";
+    char *config_dir = "mpv";
+    char buf[MAX_PATH];
+
+    if (homepath == NULL) {
+        if (SHGetFolderPathA(NULL, CSIDL_LOCAL_APPDATA|CSIDL_FLAG_CREATE, NULL,
+            SHGFP_TYPE_CURRENT, buf) == S_OK) {
+
+            homepath = buf;
+        }
+    }
 #else
-    static char *config_dir = ".mpv";
+    char *config_dir = ".mpv";
+
+    if (homepath == NULL) {
+        homepath = getenv("HOME");
+    }
 #endif
 #if defined(__MINGW32__) || defined(__CYGWIN__)
    char *temp = NULL;
@@ -88,15 +103,19 @@ char *mp_find_user_config_file(const char *filename)
    /* Hack to get fonts etc. loaded outside of Cygwin environment. */
    int i, imax = 0;
    int len = (int)GetModuleFileNameA(NULL, exedir, 260);
-    for (i = 0; i < len; i++)
+
+    for (i = 0; i < len; i++) {
        if (exedir[i] == '\\') {
            exedir[i] = '/';
            imax = i;
        }
+    }
+
    exedir[imax] = '\0';

-    if (filename)
+    if (filename) {
        temp = mp_path_join(NULL, bstr0(exedir), bstr0(filename));
+    }

    if (temp && mp_path_exists(temp) && !mp_path_isdir(temp)) {
        homedir = exedir;
@@ -106,7 +125,7 @@ char *mp_find_user_config_file(const char *filename)
 #endif
    if ((homedir = getenv("MPV_HOME")) != NULL) {
        config_dir = "";
-    } else if ((homedir = getenv("HOME")) == NULL) {
+    } else if ((homedir = homepath) == NULL) {
 #if defined(__MINGW32__) || defined(__CYGWIN__)
        homedir = exedir;
 #else
@@ -432,11 +432,20 @@ static bool psn_matches_current_process(char *psn_arg_to_check)
    return [real_psn isEqualToString:in_psn];
 }

+static bool bundle_started_from_finder(int argc, char **argv)
+{
+    bool bundle_detected     = [[NSBundle mainBundle] bundleIdentifier];
+    bool pre_mavericks_args  = argc==2 && psn_matches_current_process(argv[1]);
+    bool post_mavericks_args = argc==1;
+
+    return bundle_detected && (pre_mavericks_args || post_mavericks_args);
+}
+
 void macosx_finder_args_preinit(int *argc, char ***argv)
 {
    Application *app = mpv_shared_app();

-    if (*argc==2 && psn_matches_current_process((*argv)[1])) {
+    if (bundle_started_from_finder(*argc, *argv)) {
        macosx_redirect_output_to_logfile("mpv");
        macosx_wait_fileopen_events();

@@ -736,6 +736,7 @@ static int stream_enable_cache(stream_t **stream, int64_t size, int64_t min,

    cache->url = talloc_strdup(cache, orig->url);
    cache->mime_type = talloc_strdup(cache, orig->mime_type);
+    cache->demuxer = talloc_strdup(cache, orig->demuxer);
    cache->lavf_type = talloc_strdup(cache, orig->lavf_type);
    cache->opts = orig->opts;
    cache->start_pos = orig->start_pos;
@@ -65,12 +65,8 @@ struct bluray_priv_s {
    char *cfg_device;
 };

-static const struct stream_priv_s {
-    int title;
-    char *device;
-} bluray_stream_priv_dflts = {
-    BLURAY_DEFAULT_TITLE,
-    NULL
+static struct bluray_priv_s bluray_stream_priv_dflts = {
+    .cfg_title = BLURAY_DEFAULT_TITLE
 };

 #define OPT_BASE_STRUCT struct bluray_priv_s
@@ -496,7 +496,7 @@ static int get_chapter_time(ifo_handle_t *vts_file, tt_srpt_t *tt_srpt, int titl
            last_cell = pgc->program_map[ptt[i].pgn];
        else
            last_cell = 0;
-        do {
+        while (cell < last_cell) {
            if(!(pgc->cell_playback[cell-1].block_type == BLOCK_TYPE_ANGLE_BLOCK &&
                 pgc->cell_playback[cell-1].block_mode != BLOCK_MODE_FIRST_CELL)
            ) {
@@ -508,7 +508,7 @@ static int get_chapter_time(ifo_handle_t *vts_file, tt_srpt_t *tt_srpt, int titl
                cur++;
            }
            cell++;
-        } while(cell < last_cell);
+        }
    }
    return 0;
 }
@@ -729,8 +729,12 @@ static int demux_open_tv(demuxer_t *demuxer, enum demux_check check)
    /* get IMAGE FORMAT */
    int fourcc;
    funcs->control(tvh->priv, TVI_CONTROL_VID_GET_FORMAT, &fourcc);
-    sh_video->gsh->codec = "rawvideo";
-    sh_video->format = fourcc;
+    if (fourcc == MP_FOURCC_MJPEG) {
+        sh_video->gsh->codec = "mjpeg";
+    } else {
+        sh_video->gsh->codec = "rawvideo";
+        sh_video->format = fourcc;
+    }

    /* set FPS and FRAMETIME */

@@ -302,6 +302,8 @@ static void multiply_timings(struct packet_list *subs, double factor)
    }
 }

+#define MS_TS(f_ts) ((int)((f_ts) * 1000 + 0.5))
+
 // Remove overlaps and fill gaps between adjacent subtitle packets. This is done
 // by adjusting the duration of the earlier packet. If the gaps or overlap are
 // larger than the threshold, or if the durations are close to the threshold,
@@ -322,7 +324,10 @@ static void fix_overlaps_and_gaps(struct packet_list *subs)
            if (fabs(next->pts - end) <= threshold && cur->duration >= keep &&
                next->duration >= keep)
            {
-                cur->duration = next->pts - cur->pts;
+                // Conceptually: cur->duration = next->pts - cur->pts;
+                // But make sure the rounding and conversion to integers in
+                // sd_ass.c can't produce overlaps.
+                cur->duration = (MS_TS(next->pts) - MS_TS(cur->pts)) / 1000.0;
            }
        }
    }
@@ -410,6 +410,7 @@ static void uninit_avctx(sh_video_t *sh)
 #if !HAVE_AVUTIL_REFCOUNTING
    mp_buffer_pool_free(&ctx->dr1_buffer_pool);
 #endif
+    ctx->last_sample_aspect_ratio = (AVRational){0, 0};
 }

 static void uninit(sh_video_t *sh)
@@ -18,6 +18,7 @@
 #include <stddef.h>
 #include <assert.h>

+#include <libavcodec/avcodec.h>
 #include <libavcodec/vdpau.h>
 #include <libavutil/common.h>

@@ -41,33 +42,22 @@ struct priv {

 struct profile_entry {
    enum AVCodecID av_codec;
-    int ff_profile;
    VdpDecoderProfile vdp_profile;
    int maxrefs;
 };

-#define PE(av_codec_id, ff_profile, vdp_dcoder_profile, maxrefs) \
+#define PE(av_codec_id, vdp_dcoder_profile, maxrefs)             \
    {AV_CODEC_ID_ ## av_codec_id,                                \
-     FF_PROFILE_ ## ff_profile,                                  \
     VDP_DECODER_PROFILE_ ## vdp_dcoder_profile,                 \
     maxrefs}

 static const struct profile_entry profiles[] = {
-    PE(MPEG1VIDEO,  UNKNOWN,                    MPEG1,          2),
-    PE(MPEG2VIDEO,  MPEG2_SIMPLE,               MPEG2_SIMPLE,   2),
-    PE(MPEG2VIDEO,  UNKNOWN,                    MPEG2_MAIN,     2),
-    PE(H264,        H264_BASELINE,              H264_BASELINE,  16),
-    PE(H264,        H264_CONSTRAINED_BASELINE,  H264_BASELINE,  16),
-    PE(H264,        H264_MAIN,                  H264_MAIN,      16),
-    PE(H264,        UNKNOWN,                    H264_HIGH,      16),
-    PE(WMV3,        VC1_SIMPLE,                 VC1_SIMPLE,     2),
-    PE(WMV3,        VC1_MAIN,                   VC1_MAIN,       2),
-    PE(WMV3,        UNKNOWN,                    VC1_ADVANCED,   2),
-    PE(VC1,         VC1_SIMPLE,                 VC1_SIMPLE,     2),
-    PE(VC1,         VC1_MAIN,                   VC1_MAIN,       2),
-    PE(VC1,         UNKNOWN,                    VC1_ADVANCED,   2),
-    PE(MPEG4,       MPEG4_SIMPLE,               MPEG4_PART2_SP, 2),
-    PE(MPEG4,       UNKNOWN,                    MPEG4_PART2_ASP,2),
+    PE(MPEG1VIDEO,  MPEG1,          2),
+    PE(MPEG2VIDEO,  MPEG2_MAIN,     2),
+    PE(H264,        H264_HIGH,      16),
+    PE(WMV3,        VC1_MAIN,       2),
+    PE(VC1,         VC1_ADVANCED,   2),
+    PE(MPEG4,       MPEG4_PART2_ASP,2),
 };

 // libavcodec absolutely wants a non-NULL render callback
@@ -123,15 +113,11 @@ static bool create_vdp_decoder(struct lavc_ctx *ctx)

    const struct profile_entry *pe = NULL;
    for (int n = 0; n < MP_ARRAY_SIZE(profiles); n++) {
-        if (profiles[n].av_codec == ctx->avctx->codec_id &&
-            (profiles[n].ff_profile == ctx->avctx->profile ||
-             profiles[n].ff_profile == FF_PROFILE_UNKNOWN))
-        {
+        if (profiles[n].av_codec == ctx->avctx->codec_id) {
            pe = &profiles[n];
            break;
        }
    }
-
    if (!pe) {
        mp_msg(MSGT_VO, MSGL_ERR, "[vdpau] Unknown codec!\n");
        goto fail;
@@ -250,7 +250,7 @@ static struct vf_instance *vf_open(struct MPOpts *opts, vf_instance_t *next,
        goto error;
    vf->priv = priv;
    int retcode = vf->info->vf_open(vf, (char *)args);
-    if (retcode < 0)
+    if (retcode < 1)
        goto error;
    return vf;

@@ -72,6 +72,8 @@ typedef struct vf_priv_s {
  unsigned      buf_w[3];
  unsigned      buf_h[3];
  unsigned char *buf[3];
+
+  int gamma_i, contrast_i, brightness_i, saturation_i;
 } vf_eq2_t;


@@ -381,18 +383,22 @@ int control (vf_instance_t *vf, int request, void *data)

      if (strcmp (eq->item, "gamma") == 0) {
        set_gamma (vf->priv, exp (log (8.0) * eq->value / 100.0));
+        vf->priv->gamma_i = eq->value;
        return CONTROL_TRUE;
      }
      else if (strcmp (eq->item, "contrast") == 0) {
        set_contrast (vf->priv, (1.0 / 100.0) * (eq->value + 100));
+        vf->priv->contrast_i = eq->value;
        return CONTROL_TRUE;
      }
      else if (strcmp (eq->item, "brightness") == 0) {
        set_brightness (vf->priv, (1.0 / 100.0) * eq->value);
+        vf->priv->brightness_i = eq->value;
        return CONTROL_TRUE;
      }
      else if (strcmp (eq->item, "saturation") == 0) {
        set_saturation (vf->priv, (double) (eq->value + 100) / 100.0);
+        vf->priv->saturation_i = eq->value;
        return CONTROL_TRUE;
      }
      break;
@@ -400,19 +406,19 @@ int control (vf_instance_t *vf, int request, void *data)
    case VFCTRL_GET_EQUALIZER:
      eq = (vf_equalizer_t *) data;
      if (strcmp (eq->item, "gamma") == 0) {
-        eq->value = (int) (100.0 * log (vf->priv->gamma) / log (8.0));
+        eq->value = vf->priv->gamma_i;
        return CONTROL_TRUE;
      }
      else if (strcmp (eq->item, "contrast") == 0) {
-        eq->value = (int) (100.0 * vf->priv->contrast) - 100;
+        eq->value = vf->priv->contrast_i;
        return CONTROL_TRUE;
      }
      else if (strcmp (eq->item, "brightness") == 0) {
-        eq->value = (int) (100.0 * vf->priv->brightness);
+        eq->value = vf->priv->brightness_i;
        return CONTROL_TRUE;
      }
      else if (strcmp (eq->item, "saturation") == 0) {
-        eq->value = (int) (100.0 * vf->priv->saturation) - 100;
+        eq->value = vf->priv->saturation_i;
        return CONTROL_TRUE;
      }
      break;
@@ -503,9 +509,13 @@ int vf_open(vf_instance_t *vf, char *args)
    eq2->gamma_weight = par[7];

    set_gamma (eq2, par[0]);
+    eq2->gamma_i = (int) (100.0 * log (vf->priv->gamma) / log (8.0));
    set_contrast (eq2, par[1]);
+    eq2->contrast_i = (int) (100.0 * vf->priv->contrast) - 100;
    set_brightness (eq2, par[2]);
+    eq2->brightness_i = (int) (100.0 * vf->priv->brightness);
    set_saturation (eq2, par[3]);
+    eq2->saturation_i = (int) (100.0 * vf->priv->saturation) - 100;
  }

  return 1;
@@ -523,7 +523,7 @@ int vo_cocoa_check_events(struct vo *vo)

 void vo_cocoa_fullscreen(struct vo *vo)
 {
-    if (![NSThread isMainThread]) {
+    if (![NSThread isMainThread] && resize_callback_registered(vo)) {
        // This is the secondary thread, unlock since we are going to invoke a
        // method synchronously on the GUI thread using Cocoa.
        vo_cocoa_set_current_context(vo, false);
@@ -535,7 +535,7 @@ void vo_cocoa_fullscreen(struct vo *vo)
                             waitUntilDone:YES];


-    if (![NSThread isMainThread]) {
+    if (![NSThread isMainThread] && resize_callback_registered(vo)) {
        // Now lock again!
        vo_cocoa_set_current_context(vo, true);
    }
@@ -657,7 +657,11 @@ int vo_cocoa_cgl_color_size(struct vo *vo)
            NSApplicationPresentationDefault;

        if ([s->fs_screen hasMenubar])
-            popts |= NSApplicationPresentationAutoHideMenuBar;
+            // Cocoa raises an exception when autohiding the menubar but
+            // not the dock. They probably got bored while programming the
+            // multi screen support and took some shortcuts (tested on 10.8).
+            popts |= NSApplicationPresentationAutoHideMenuBar |
+                     NSApplicationPresentationAutoHideDock;

        if ([s->fs_screen hasDock])
            popts |= NSApplicationPresentationAutoHideDock;
@@ -762,20 +766,15 @@ int vo_cocoa_cgl_color_size(struct vo *vo)
    CGFloat dx = (f.size.width  - ns.width) / 2;
    CGFloat dy = (f.size.height - ns.height - [self titleHeight]) / 2;
    NSRect nf  = NSRectFromCGRect(CGRectInset(NSRectToCGRect(f), dx, dy));
-
-    struct vo *vo = self.videoOutput;
-    if (!(vo && !vo->opts->border)) {
-        NSRect s = [[self screen] visibleFrame];
-        if (nf.origin.y + nf.size.height > s.origin.y + s.size.height)
-            nf.origin.y = s.size.height - nf.size.height;
-    }
-
    [self setFrame:nf display:NO animate:NO];
 }

- (NSRect)constrainFrameRect:(NSRect)rect toScreen:(NSScreen *)screen
+- (NSRect)constrainFrameRect:(NSRect)nf toScreen:(NSScreen *)screen
 {
-    return rect;
+    NSRect s = [[self screen] visibleFrame];
+    if (nf.origin.y + nf.size.height > s.origin.y + s.size.height)
+        nf.origin.y = s.origin.y + s.size.height - nf.size.height;
+    return nf;
 }

@end
@@ -433,7 +433,6 @@ static bool fbotex_init(struct gl_video *p, struct fbotex *fbo, int w, int h,
    GL *gl = p->gl;
    bool res = true;

-    assert(gl->mpgl_caps & MPGL_CAP_FB);
    assert(!fbo->fbo);
    assert(!fbo->texture);

@@ -446,6 +445,9 @@ static bool fbotex_init(struct gl_video *p, struct fbotex *fbo, int w, int h,

    MP_VERBOSE(p, "Create FBO: %dx%d\n", fbo->tex_w, fbo->tex_h);

+    if (!(gl->mpgl_caps & MPGL_CAP_FB))
+        return false;
+
    gl->GenFramebuffers(1, &fbo->fbo);
    gl->GenTextures(1, &fbo->texture);
    gl->BindTexture(GL_TEXTURE_2D, fbo->texture);
@@ -1499,6 +1501,10 @@ static bool get_image(struct gl_video *p, struct mp_image *mpi)

    struct video_image *vimg = &p->image;

+    // See comments in init_video() about odd video sizes.
+    // The normal upload path does this too, but less explicit.
+    mp_image_set_size(mpi, vimg->planes[0].w, vimg->planes[0].h);
+
    for (int n = 0; n < p->plane_count; n++) {
        struct texplane *plane = &vimg->planes[n];
        mpi->stride[n] = mpi->plane_w[n] * p->image_desc.bytes[n];
@@ -1709,10 +1715,10 @@ static void check_gl_features(struct gl_video *p)
    }

    // fruit dithering mode and the 3D lut use this texture format
-    if ((p->opts.dither_depth >= 0 && p->opts.dither_algo == 0) ||
-        p->use_lut_3d)
+    if (have_fbo && ((p->opts.dither_depth >= 0 && p->opts.dither_algo == 0) ||
+                     p->use_lut_3d))
    {
-        // doesn't disalbe anything; it's just for the log
+        // doesn't disable anything; it's just for the log
        MP_VERBOSE(p, "Testing GL_R16 FBO (dithering/LUT)\n");
        test_fbo(p, GL_R16);
    }
@@ -206,7 +206,8 @@ static uint64_t convert_to_vdptime(struct vo *vo, uint64_t t)

 static int render_video_to_output_surface(struct vo *vo,
                                          VdpOutputSurface output_surface,
-                                          VdpRect *output_rect)
+                                          VdpRect *output_rect,
+                                          VdpRect *video_rect)
 {
    struct vdpctx *vc = vo->priv;
    struct vdp_functions *vdp = vc->vdp;
@@ -238,7 +239,7 @@ static int render_video_to_output_surface(struct vo *vo,
    vdp_st = vdp->video_mixer_render(vc->video_mixer, VDP_INVALID_HANDLE,
                                     0, field, 2, past_fields,
                                     bv[dp/2].surface, 1, future_fields,
-                                     &vc->src_rect_vid, output_surface,
+                                     video_rect, output_surface,
                                     NULL, output_rect, 0, NULL);
    CHECK_ST_WARNING("Error when calling vdp_video_mixer_render");
    return 0;
@@ -250,7 +251,7 @@ static int video_to_output_surface(struct vo *vo)

    return render_video_to_output_surface(vo,
                                          vc->output_surfaces[vc->surface_num],
-                                          &vc->out_rect_vid);
+                                          &vc->out_rect_vid, &vc->src_rect_vid);
 }

 static int next_deint_queue_pos(struct vo *vo, bool eof)
@@ -1261,7 +1262,7 @@ static struct mp_image *get_screenshot(struct vo *vo)
    }

    VdpRect rc = { .x1 = vc->vid_width, .y1 = vc->vid_height };
-    render_video_to_output_surface(vo, vc->screenshot_surface, &rc);
+    render_video_to_output_surface(vo, vc->screenshot_surface, &rc, &rc);

    struct mp_image *image = read_output_surface(vc, vc->screenshot_surface,
                                                 vc->vid_width, vc->vid_height);
@@ -569,8 +569,11 @@ static bool create_display (struct vo_wayland_state *wl)
 {
    wl->display.display = wl_display_connect(NULL);

-    if (!wl->display.display)
+    if (!wl->display.display) {
+        MP_ERR(wl->vo, "failed to connect to a wayland server: "
+                       "check if a wayland compositor is running\n");
        return false;
+    }

    wl_list_init(&wl->display.output_list);
    wl->display.registry = wl_display_get_registry(wl->display.display);
@@ -644,7 +647,7 @@ static bool create_input (struct vo_wayland_state *wl)
    wl->input.xkb.context = xkb_context_new(0);

    if (!wl->input.xkb.context) {
-        MP_ERR(wl, "failed to initialize input\n");
+        MP_ERR(wl->vo, "failed to initialize input: check xkbcommon\n");
        return false;
    }

@@ -680,7 +683,6 @@ int vo_wayland_init (struct vo *vo)
        || !create_window(wl)
        || !create_cursor(wl))
    {
-        MP_ERR(wl, "failed to initialize backend\n");
        return false;
    }

@@ -766,8 +768,12 @@ static int vo_wayland_check_events (struct vo *vo)
     * when pausing no input events get queued so we have to check if there
     * are events to read from the file descriptor through poll */
    if (poll(&fd, 1, 0) > 0) {
-        if (fd.revents & POLLERR || fd.revents & POLLHUP)
-            MP_ERR(wl, "error occurred on the display fd\n");
+        if (fd.revents & POLLERR || fd.revents & POLLHUP) {
+            MP_FATAL(wl, "error occurred on the display fd: "
+                         "closing file descriptor\n");
+            close(wl->display.display_fd);
+            mp_input_put_key(vo->input_ctx, MP_KEY_CLOSE_WIN);
+        }
        if (fd.revents & POLLIN)
            wl_display_dispatch(dp);
        if (fd.revents & POLLOUT)
@@ -455,6 +455,7 @@ int vo_x11_init(struct vo *vo)
    if (!x11->display) {
        mp_msg(MSGT_VO, MSGL_ERR,
               "vo: couldn't open the X11 display (%s)!\n", dispName);
+
        talloc_free(x11);
        vo->x11 = NULL;
        return 0;
@@ -469,6 +470,9 @@ int vo_x11_init(struct vo *vo)
    }

    x11->xim = XOpenIM(x11->display, NULL, NULL, NULL);
+    if (!x11->xim)
+        mp_msg(MSGT_VO, MSGL_WARN,
+               "x11: XOpenIM() failed. Unicode input will not work.\n");

    init_atoms(vo->x11);

@@ -982,11 +986,13 @@ static void vo_x11_create_window(struct vo *vo, XVisualInfo *vis, int x, int y,
        x11->mouse_cursor_hidden = false;
        vo_set_cursor_hidden(vo, true);
    }
-    x11->xic = XCreateIC(x11->xim,
-                         XNInputStyle, XIMPreeditNone | XIMStatusNone,
-                         XNClientWindow, x11->window,
-                         XNFocusWindow, x11->window,
-                         NULL);
+    if (x11->xim) {
+        x11->xic = XCreateIC(x11->xim,
+                             XNInputStyle, XIMPreeditNone | XIMStatusNone,
+                             XNClientWindow, x11->window,
+                             XNFocusWindow, x11->window,
+                             NULL);
+    }

    vo_x11_update_window_title(vo);
 }
@@ -1040,9 +1046,6 @@ void vo_x11_config_vo_window(struct vo *vo, XVisualInfo *vis, int x, int y,
    if (flags & VOFLAG_HIDDEN)
        return;

-    if (opts->ontop)
-        vo_x11_setlayer(vo, x11->window, opts->ontop);
-
    bool reset_size = !(x11->old_dwidth == width && x11->old_dheight == height);
    if (x11->window_hidden) {
        x11->nofs_x = x;
@@ -1075,6 +1078,9 @@ void vo_x11_config_vo_window(struct vo *vo, XVisualInfo *vis, int x, int y,
        }
    }

+    if (opts->ontop)
+        vo_x11_setlayer(vo, x11->window, opts->ontop);
+
    vo_x11_fullscreen(vo);

    XSync(x11->display, False);