Not very clean since there's a lot of potential unsafe urls that youtube-dl
can give us, depending on whether it's a single url, split tracks,
playlists, segmented dash, etc.
This will help with things like livestreams.
As a minor detail, subtitles are excluded, because they sometimes have
"unused" events after video and audio ends. To avoid this annoying
corner case, just ignore them.
Before this change and before the seekable stream cache became a thing,
we could possibly seek using the stream cache. But we couldn't know
whether the seek would succeed. We knew the available byte range, but
could in general not tell whether a demuxer would stay within the range
when trying to seek to a specific time position. We preferred to have
safe defaults, so seeking in streams that were detected as unseekable
were not honored. We allowed overriding this via --force-seekable=yes,
in which case it depended on your luck whether the seek would work, or
the player crapped its pants.
With the demuxer packet cache, we can tell exactly whether a seek will
work (at least if there's only 1 seek range). We can just let seeks go
through. Everything to allow this is already in place, and this commit
just moves around some minor things.
Note that the demux_seek() return value was not used before, because low
level (i.e. network level) seeks are usually asynchronous, and if they
fail, the state is pretty much undefined. We simply repurpose the return
value to signal whether cache seeking worked. If it didn't, we can just
resume playback normally, because demuxing continues unaffected, and no
decoder are reset.
This should be particularly helpful to people who for some reason stream
data into stdin via streamlink and such.
In commit 1199c1e3, we added checks to every libarchive API call to make
sure the archive was closed on ARCHIVE_FATAL - otherwise, libarchive
could endow us with free CVEs (such as it apparently happens when you
continue reading a rar archive that uses features not yet supported by
libarchive).
This broke the fallback for seeking in unseekable archive formats. Of
course libarchive won't tell us directly whether a format implementation
has seek support or not - and OF COURSE it returns ARCHIVE_FATAL if it
has no seek support. (The error string, which you can retrieve via API,
is actually more detailed, and also claims it's an "internal error". I
don't think so, libarchive.) Returning ARCHIVE_FATAL means we have to
assume free CVEs are ahead, and we have to close the archive. Which
breaks the fallback in a dumb way (we have no way of telling which of
those cases happened anyway).
Fix this by assuming that all seek errors are potentially due to lack of
seek support. If the seek call fails, reopen the archive, and set a flag
so the seek API is never tried again. (This means we can still skip
ahead for forward seeks, which is more efficient than skipping from the
start of the archive entry.)
Also fix an old typo in an error message.
Caused by the relatively recent change to packet parsing. This time it
was probably triggered by lace type 0, which reduces the byte length of
a 0 sized packet to 3 (timestamp + flag) instead of 4 (lace count for
other lace types). The thing about laces is just my guess why it worked
for other 0 sized packets, though.
Also remove the redundant and now incorrect check below.
Fixes#5271.
This log line tells us why the demuxer is trying to read more, which us
useful when debugging queue overflows. Probably barely useful, but I
think keeping that flag separately also makes the code slightly easier
to understand.
Same as previous commit, but for the OSC.
(A bit of a waste to request demuxer-cache-state at least twice per
frame, but the OSC queries so many properties it probably doesn't matter
anymore.)
I don't want to add another field to display stream and demuxer cache
separately, so just add them up. This strangely makes sense, since the
forward buffered stream cache amount consists of data not read by the
demuxer yet. (If the demuxer cache has buffered the full stream, the
forward buffered stream cache amount is 0.)
Reduce it from 75MB in both directions (forward/backwards) to 10MB each.
The stream cache is kind of becoming useless in favor of the demuxer
cache. Using both doesn't make much sense, because they will contain
duplicated data for no reason.
Still leave it at 10MB, which may help with mp4 a bit. libavformat's mp4
demuxer tends to seek too much, so we try to avoid triggering network
level seeks by having some caching in the stream layer.
This fixes weird behavior in the following case:
- open a file
- make sure the max. demuxer forward cache is smaller than the
file's video track
- make sure the max. readahead duration is larger than the file's
duration
- disable the audio track
- seek to the beginning of the file
- once the cache has filled enable the audio track
- a queue overflow warning should appear
(- looking at the seek ranges is also interesting)
The queue overflow warning happens because the packed queue for the
video track will use up the full quota set by --demuxer-max-bytes. When
the audio track is enabled, reading an audio packet would technically
overflow the packet cache by the size of whatever packet is read next.
This means the demuxer signals EOF to the decoder, and once playback has
consumed enough video packets so that audio packets can be read again,
the decoder resumes from EOF. This interacts badly with A/V
synchronization and the whole thing can randomly crap itself until audio
has fully recovered.
We didn't care about this so far, but we want to raise the readahead
duration to something very high, so that the demuxer cache is fully
used. This means this case can be hit quite quickly by switching audio
or subtitle tracks, and is not really an obscure corner case anymore.
Fix this by always losing all cache. Since the cache can't be used
anyway until the newly selected track has been read, this is not much of
a disadvantage. The only thing that could be brought up is that
unselecting the track again could resume operation normally. (Maybe this
would be useful if network died completely without chance of recovery.
Then you could watch the already buffered video anyway by deselecting
the audio track again.) But given the headaches, this seems like the
better solution.
Unfortunately this requires adding new new strange fields and strangely
fragmenting state management functions again. I'm sure whoever works on
this in the future will hate me. Currently it seems like the lesser
evil, and much simpler and robust than the other potential solutions.
In case this needs to be revisited, here is a reminder for readers from
the future what alternative solutions were considered, without those
disadvantages:
A first attempted solution allowed the demuxer to buffer some additional
packets on track switching. This would allow it to read enough data to
feed the decoder at least. But it was still awkward, as it didn't allow
the demuxer to continue prefetching the newly selected track. It also
barely worked, because you could make the forward buffer "over full" by
seeking back with seekable cache enabled, and then it couldn't read
packets anyway.
As alternative solution, we could always demux and cache all tracks,
even if they're deselected. This would also not require a network-level
seek for the "refresh" logic (it's the thing that lets the video decoder
continue as if nothing happened, while actually seeking back in the
stream to get the missing audio packets, in the case of enabling a
previously disabled audio track). But it would also possibly waste
network and memory resources, depending on what the user actually wants.
A second solution would just account the queue sizes for each stream
separately. We could freely fill up the audio packet queue, even if the
video queue is full. Since the demuxer API returns interleaved packets
and doesn't let you predict which packet type comes next, this is not as
simple as it sounds, but it'd probably tie in nicely with the "refresh"
logic.
A third solution would be removing buffered video packets from the end
of the packet queue. Since the "refresh" logic gets these anyway, there
is no reason to keep them if they prevent the audio packet queue from
catching up with the video one. But this would require additional logic,
would interact badly with a bunch of other corner cases. And as far as
the code goes, it's rather complex, because all the logic is written
with FIFO behavior in mind (including the fact that the packet queue is
a singly linked list with no backwards links, making removal from the
end harder).
Some old crap which nobody needs and which probably nobody uses.
This relies on a GCC extension: using "## __VA_ARGS__" to remove the
comma from the argument list if the va args are empty. It's supported
by clang, and there's some chance newer standards will introduce a
proper way to do this. (Even if it breaks somewhere, it will be a
problem only for 1 release, since I want to drop the deprecated
properties immediately.)
Libav has been broken due to the hwdec changes. This was always a
temporary situation (depended on pending patches to be merged), although
it took a bit longer. This also restores the travis config.
One code change is needed in vd_lavc.c, because it checks the AV_PIX_FMT
for videotoolbox (as opposed to the mpv format identifier), which is not
available in Libav. Add an ifdef; the affected code is for a deprecated
option anyway.
This hack was part of a solution to VSync judder in desktop OpenGL on
Windows. Rather than using blocking-SwapBuffers(), mpv could use
DwmFlush() to wait for the image to be presented by the compositor.
Since this would only work while the compositor was running, and the
compositor was silently disabled when OpenGL entered exclusive
fullscreen mode, mpv needed a way to detect exclusive fullscreen mode.
The code that is being removed could detect exclusive fullscreen mode by
checking the state of an undocumented mutex using undocumented native
API functions, but because of how fragile it was, it was always meant to
be removed when a better solution for accurate VSync in OpenGL was
found. Since then, mpv got the dxinterop backend, which uses desktop
OpenGL but has accurate VSync. It also got a native Direct3D 11 backend,
which is a viable alternative to OpenGL on Windows.
For people who are still using desktop OpenGL with WGL, there shouldn't
be much of a difference, since mpv can use other API functions to detect
exclusive fullscreen.
Refactored and split the `reinit_window_state` code into four
separate functions:
- `update_window_style` used to update window styles without
modifying the window rect.
- `fit_window_on_screen` used to adjust the window size when it is
larger than the screen size. Added a helper function `fit_rect` to
fit one rect on another without using any data from w32 struct.
- `update_fullscreen_state` used to calculate the new fullscreen
state and adjust the window rect accordingly.
- `update_window_state` used to display the window on screen with
new size, position and ontop state.
This commit fixes three issues:
- fixed#4753 by skipping `fit_window_on_screen` for a maximized
window, since maximized window should already fit on the screen.
It should be noted that this bug was only reproducible with
`--fit-border` option which is enabled by default. The cause of the
bug is that after calling the `add_window_borders` for a maximized
window, the rect in result is slightly larger than the screen rect,
which is okay, `SetWindowPos` will interpret it as a maximized state
later, so no auto-fitting to screen size is needed here.
- fixed#5215 by skipping `fit_window_on_screen` when leaving fullscreen.
On a multi-monitor system if the mpv window was stretched to cover
multiple monitors, its size was reset after switching back from
fullscreen to fit the size of the active monitor. Also, when changing
`--ontop` and `--border` options, now only the
`update_window_style` and `update_window_state` functions are used,
so `fit_window_on_screen` is not used for them too.
- fixed#2451 by moving the `ITaskbarList2_MarkFullscreenWindow`
below the `SetWindowPos`. If the taskbar is notified about fullscreen
state before the window is shown on screen, the taskbar button could
be missing until Alt-TAB is pressed, usually it was reproducible on
Windows 8.
Other changes:
- In `update_fullscreen_state` the `reset window bounds` debug
message now reports client area size and position, instead of window area
size and position. This is done for consistency with debug messages
in handling fullscreen state above in this function, since they also print
window bounds of the client area.
- Refactored `gui_thread_reconfig`. Added a new window flag `fit_on_screen`
to fit the window on screen even when leaving fullscreen. This is needed
for the case when the new video opened while the window is still in the
fullscreen state.
- Moved parent and fullscreen state checks out from the WM_MOVING to
`snap_to_screen_edges` function for consistency with other functions.
There's no point in keeping these checks out of the function body.
When window and screen size and position are stored in RECT, it's
much easier to modify them using WinAPI functions.
Added two macros to get width and height of the rect.
This was off for mpv CLI, but on for libmpv. The motivation behind this
was that it would be confusing for applications if libmpv continued
playback in a severely "degraded" way (without either audio or video),
and that it would be better to fail early.
In reality the behavior was just a confusing difference to mpv CLI, and
has confused actual users as well. Get rid of it.
Not bothering with a version bump, since this is so minor, and it's easy
to ensure compatibility in affected applications by just setting the
option explicitly.
(Also adding the missing next-release-marker in client-api-changes.rst.)
I've decided that MP_TRACE means “noisy spam per frame”, whereas
MP_DBG just means “more verbose debugging messages than MSGL_V”.
Basically, MSGL_DBG shouldn't create spam per frame like it currently
does, and MSGL_V should make sense to the end-user and provide mostly
additional informational output.
MP_DBG is basically what I want to make the new default for --log-file,
so the cut-off point for MP_DBG is if we probably want to know if for
debugging purposes but the user most likely doesn't care about on the
terminal.
Also, the debug callbacks for libass and ffmpeg got bumped in their
verbosity levels slightly, because being external components they're a
bit less relevant to mpv debugging, and a bit too over-eager in what
they consider to be relevant information.
I exclusively used the "try it on my machine and remove messages from
MSGL_* until it does what I want it to" approach of refactoring, so
YMMV.
Annoying exception that makes no sense to keep. Normally, users or
client applications will either use --hwdec=auto, or not set the option
at all, which both leads to the expected result.
By default the CreateProcess changes the mouse cursor to
IDC_APPSTARTING. The new flag added to STARTUPINFOEXW prevents
changing the cursor from default arrow on creating a new process.
This commit introduces mp.utils.file_info() for querying information
on file paths, implemented for both Lua and Javascript.
The function takes a file path as an argument and returns a Lua table /
JS object upon success. The table/object will contain the values:
mode, size, atime, mtime, ctime and the convenience booleans is_file, is_dir.
On error, the Lua side will return `nil, error` and the Javascript side
will return `undefined` (and mark the last error).
This feature utilizes the already existing cross-platform `mp_stat()`
function.
The OpenType Font File specification recommends that "Collection fonts
that use CFF or CFF2 outlines should have an .OTC extension." mpv
should accept .otc as a fallback extension for font detection should
the mimetype detection fail.
IETF RFC8081 added the "font" top-level media type,
including font/ttf, font/otf, font/sfnt, and also
font/collection. These font formats are all supported
by mpv/libass but they are not accepted as valid
Matroska mime types. mpv can load them via file extension
and they work as expected, so files using the new types
should not trigger a warning from mpv.
Full range YUV causes problems everywhere. For example it's usually the
wrong choice when using encoding mode, and libswscale sometimes messes
up when converting to full range too. (In this partricular case, we
found that converting rgba->yuv420p16 full range actually seems to
output limited range.)
This actually restores a similar heueristic from the late vf_scale.c.
When autoprobing the hwdec interops (which now happens to all compiled
interops if hardware decoding is used), failure to load an interop
should not print an error in the normal case. So hide it.
(We could make the log level conditional on whether autoprobing is used,
but directly loading it without autoprobing is obscure, and most other
interops don't do this either.)
For METHOD_INTERNAL hwdecs (non-copy cases), make sure the VO interops
are always loaded, because those decoders will output hardware pixel
formats, which will need special support in vo_gpu. Otherwise,
initialization will fail, complaining that it can't convert the output
format to something the VO supports.
It seems like there's nothing stopping from sub-demuxers from keeping
packets in the cache, even if it's completely pointless. The top-most
demuxer (demux_timeline) already takes care of caching, so sub-demuxers
only waste space and time with this.
Add a function that can disable the packet cache even at runtime and
after packets are read. (It's not clear whether it really can happen
that packets are read before demux_timeline gets the sub-demuxers, but
there's no reason to make it too fragile.) Call it on all sub-demuxers.
For this to work, it seems we have to move the code for setting the
seekable_cache flag to before demux_timeline is potentially initialized,
because otherwise the cache would be reenabled if the demuxer triggering
timeline support is a timeline segment itself (e.g. ordered chapters).
This fixes missing audio when cycling through audio tracks with anything
that uses nested demuxers, such as demux_timeline, which us used for
EDL, --merge-files, ordered chapters, and youtube-dl pseudo DASH
support. When this bug happened, reenabling an audio track would lead to
silence for the duration of the readahead amount.
The underlying reason is the incorrectly updated buffered range on track
switch. It accidentally included the amount covered by the deselected
stream. But the cause of the observed effect was that demux_timeline
issued a refresh seek to the underlying slave demuxer, which in turn
thought it could do a cache seek, because the seek range still included
everything.
update_stream_selection_state() calls update_seek_ranges() to update the
seek ranges after a track switch. When reenabling the track, ds->eager
was set to false during update_seek_ranges(), which made it think the
stream was sparse, and thus it didn't restrict the current seek range
(making later code think everything was buffered). Fix this by moving
some code, so we first update the ds->eager flag, then the seek ranges.
Also verbose log the low level stream selection calls.
Calling do_deactivate_getch2 before joining the terminal thread could
lead to breakage if the terminal thread got another interation in before
it was signaled to stop.
This also addresses a minor error with the order in which things are
initialized - getch2_poll would previously call tcgetpgrp(tty_in) before
tty_in was initialized, which did not lead to broken behavior, but was
not correct either.
Fixes#5195
This implements a poll-compatible interface, backed by select on macOS,
suitable for polling on device files - which are not supported by
macOS's implementation of poll. This is a (long-standing) bug in macOS,
so hopefully we can eventually remove this shim.
'help' is a valid value for a lot of mpv options, such as `hwdec`
or `vo` for printing available values, so this change makes the
output of OPT_CHOICE options like `--video-sync=help` more
consistent by not reporting an error about invalid value 'help'.
update_subtitles() makes sure all subtitle packets at/before the given
PTS have been read and processed. Normally, this function is only called
before sending a frame to the VO. This is too late for vf_sub, which
expects the subtitles to be updated before feeding a frame to the
filters.
Apparently this was specifically a problem for the first frame.
Subsequent frames might have been ok due to general prefetching.
(This will fail anyway, should a filter dare to add an offset to the
timestamps of the filered frames before they pass to vf_sub.)
Fixes#5194.
POSIX permits select() to modify the timeout, which can happen on the
Linux implementation. This can reset the timeout, which spins this into
a tight loop. A timeout isn't necessary in the first place, so just use
NULL instead.
This was a bit confused, and I bet nobody understood whether to use
--sub-file or --sub-files, and what the difference is. Explicitly
mention that both variants exist, and how they are related.
Until now, using --sub-file would add only subtitle tracks from the
given file. (E.g. if you passed a video file, only the subtitle tracks
from it were added, not the video or audio tracks.)
This is slightly messy (because streams are hidden), and users don't
even want it, as shown by #5132. Change it to always add all streams.
But if there's no stream of the wanted type, we still report an error
and do not add any streams. It's also made sure none of the other track
types are autoselected.
Also adjust the error messages on load failure slightly.
Fixes#5132.
It appears libavformat never sets the file start time for subtitles, so
this special check is not needed. The original idea was probably that
_if_ the demuxer set the start time to the first subtitle packet, the
subtitles would be shifted incorrectly.
* Distinguish between the window being moved or not.
* Skip trying to snap if currently in full screen or an embedded
window.
* Exit snapped state if the size changed when the window was being
moved.
Check the expected width and height against up-to-date
window placement. If they do not match, we will consider snapping
to have happened on Windows' side.
Previously when using a libmpv instance to play multiple videos,
once --start was set there was no clear way to unset it. You could
use --start=0, but 0 does not always mean the beginning of the file
(especially when using --rebase-start-time=no). Looking up the start
timestamp and passing that in also does not always work, particularly
when the first timestamp is negative (since negative values to --start
have a special meaning).
This commit adds a new "none" value which maps to the internal
REL_TIME_NONE, matching the default value of the play_start option.
Fixes display-sync (though if you change virtual desktops you'll need to seek
to re-enable display-sync) partially under wayland.
As an advantage, rendering is completely disabled if you change desktops or
alt+tab so you lose no performance if you leave mpv running elsewhere as long
as it isn't visible.
This could also be ported to other VOs which supports it.
Most options that change the playback endpoint coexist and playback
stops when it reaches any of them. (e.g. --ab-loop-b, --end, or
--chapter). This patch extends that behavior to --length so it isn't
automatically trumped by --end if both are present. These two will
interact now as the other options do.
This change is also documented in DOCS/man/options.rst.
Using --loop-file should now seek to the position denoted by --start
or equivalent option, rather than always seeking to the beginning as
it had done before. --loop-playlist already behaves this way, so
this brings --loop-file in line for added consistency.
If --ab-loop-b is present, then ab-looping will be enabled and will
attempt to seek to the beginning of the file. This patch changes it
so it will instead seek to the start of playback, either via --start
or some equivalent, rather than always to the beginning of the file.
Added a get_play_start_pts function to coincide with the
already-existing get_play_end_pts. This prevents code duplication
and also serves to make it so code that probes the start time
(such as get_current_pos_ratio) will work correctly with chapters.
Included is a bug fix for misc.c/rel_time_to_abs that makes it work
correctly with chapters when --rebase-start-time=no is set.
We need to support hardware/drivers which do not support ARGB8888 in
their primary plane.
We also use p->primary_plane_format when creating the gbm surface, to
make sure it always matches (in actuality there should be little
difference).
Passing in an invalid DRM overlay id with the --drm-overlay option would
cause drmplane to be freed twice: once in the for-loop and once at the
error-handler label fail.
Solve by setting drmpanel to NULL after freeing it.
Also the 'return false' statement after the error handler label should
probably be 'return NULL', given that the return type of
drm_atomic_create_context returns a pointer.
vo_x11 and vo_xv need this. According to the Linux manpage, all involved
functions are POSIX-2001 anyway. (I just assumed they were not, because
they're mostly System V UNIX legacy garbage.)
If the codec uses AV_CODEC_HW_CONFIG_METHOD_INTERNAL, and we're using
the -copy method, then don't request the native pix_fmt. It might not
have a AVFrame.hw_frames_ctx set, and we couldn't read back at all. On
top of that, most of those decoders probably don't provide read-back
when using such opaque formats anyway, while providing separate decoding
modes to decode to RAM.
Finally get rid of all the HWDEC_* things, and instead rely on the
libavutil equivalents. vdpau still uses a shitty hack, but fuck the
vdpau code.
Remove all the now unneeded remains. The vdpau preemption thing was not
unused anymore; if someone cares this could probably be restored.
This code is for trying to avoid using an emulation layer when using
auto probing, so that we end up using the actual API the drivers
provide. It was destroyed in the recent refactor.
With the recent changes, mpv's internal mechanisms got synced to
libavcodec's once more. Some things are still needed for filters (until
the mechanism gets replaced), but there's no need to require other hwdec
methods to use these fields. So remove them where they are unnecessary.
Also fix some minor leaks in the dxva2 backends, and set the driver_name
field in the Apple ones. Untested on Apple crap.
Otherwise, if e.g. "nvdec" didn't work, but "nvdec-copy" did, it would
never try "vdpau", which is actually the next non-copy mode on the
autprobe list. It's really expected that it selects "vdpau". Fix this by
sorting the -copy modes to the end of the final hwdec list.
But we still don't want preferred -copy modes like "nvdec-copy" to be
sorted after fragile non-preferred modes like "cuda", and --hwdec=auto
should prefer "nvdec-copy" over it, so make sure the copying mode does
not get precedence over preferred vs. non-preferred mode.
Also simplify the existing auto_pos sorting condition, and fix the
fallback sort order (although that doesn't matter too much).
This is never updated after the AO inits, so there are several cases
where the volume would stay at 100%, even if it shouldn't. This affects
initial volume as well as track switching or switching between files.
dlopen() and dlsym() can fail in various ways, and we can find out
how it failed by calling dlerror(). This is particularly useful if
you typo the filename of a script when explicitly passing it with
--script, and dlopen actually tells you that the file doesn't exist
instead of leading you down a rabbit hole of disassembling your
shared object file to figure out why the thing won't load.
Change it from explicit metadata about every hwaccel method to trying to
get it from libavcodec. As shown by add_all_hwdec_methods(), this is a
quite bumpy road, and a bit worse than expected.
This will probably cause a bunch of regressions. In particular I didn't
check all the strange decoder wrappers, which all cause some sort of
special cases each. You're volunteering for beta testing by using this
commit.
One interesting thing is that we completely get rid of mp_hwdec_ctx in
vd_lavc.c, and that HWDEC_* mostly goes away (some filters still use it,
and the VO hwdec interops still have a lot of code to set it up, so it's
not going away completely for now).
Seems like they finally got rid of this. It was the first lavc vdpau
API, and mpv stopped supporting it in favor of newer APIs a long time
ago, causing confusion to users who tried to enable vdpau decoding by
forcing the decoders (MPlayer style).
The libavcodec mediacodec support does not conform to the new hwaccel
APIs yet. It has been agreed uppon that this glue code can be deleted
for now, and support for it will be restored at a later point.
Readding would require that it supports the AVCodecContext.hw_device_ctx
API. The hw_device_ctx would then contain the surface ID.
vo_mediacodec_embed would actually perform the task of creating
vo.hwdec_devs and adding a mp_hwdec_ctx, whose av_device_ref is a
AVHWDeviceContext containing the android surface.
It makes more sense to have it in the general video directory (along
with vdpau.c and vaapi.c), since the decoder source files don't even
access it anymore.
Like with all hwaccels, there's little that is actually specific to
decoding (which has been moved away anyway), and what is left are
declarations (which will also go away soon).
Lots of shit code for nothing. We probably could just use libavutil's
code for all of this. But for now go with this, since it tends to
prevent stupid terminal messages during probing (libavutil has no
mechanism to selectively suppress errors specifically during probing).
Ignores the "emulated" API flag (for avoiding vaapi/vdpau wrappers), but
it doesn't matter that much for -copy anyway.
This leaked 2 unreffed AVFrame structs (roughly 1KB) per decoded frame.
Can I blame the FFmpeg API and the weird difference between freeing and
unreffing an AVFrame?
The idea is to get rid of vd_lavc_hwdec, so special functionality like
this has to go somewhere else. At this point, hwframes_refine is only
needed for d3d11, and it doesn't do much, so for now the new callback
has no context. In can be made more fancy if really needed.
The testing_only field is not referenced anymore with vaglx removed and
the previous commit dropping all uses.
The ra_hwdec_driver.api field became unused with the previous commit,
but all hwdec interop drivers still initialized it.
Since this touches highly OS-specific code, build regressions are
possible (plus the previous commit might break hw decoding at runtime).
At least hwdec_cuda.c still used the .api field, other than initializing
it.
Make the VO<->decoder interface capable of supporting multiple hwdec
APIs at once. The main gain is that this simplifies autoprobing a lot.
Before this change, it could happen that the VO loaded the "wrong" hwdec
API, and the decoder was stuck with the choice (breaking hw decoding).
With the change applied, the VO simply loads all available APIs, so
autoprobing trickery is left entirely to the decoder.
In the past, we were quite careful about not accidentally loading the
wrong interop drivers. This was in part to make sure autoprobing works,
but also because libva had this obnoxious bug of dumping garbage to
stderr when using the API. libva was fixed, so this is not a problem
anymore.
The --opengl-hwdec-interop option is changed in various ways (again...),
and renamed to --gpu-hwdec-interop. It does not have much use anymore,
other than debugging. It's notable that the order in the hwdec interop
array ra_hwdec_drivers[] still matters if multiple drivers support the
same image formats, so the option can explicitly force one, if that
should ever be necessary, or more likely, for debugging. One example are
the ra_hwdec_d3d11egl and ra_hwdec_d3d11eglrgb drivers, which both
support d3d11 input.
vo_gpu now always loads the interop lazily by default, but when it does,
it loads them all. vo_opengl_cb now always loads them when the GL
context handle is initialized. I don't expect that this causes any
problems.
It's now possible to do things like changing between vdpau and nvdec
decoding at runtime.
This is also preparation for cleaning up vd_lavc.c hwdec autoprobing.
It's another reason why hwdec_devices_request_all() does not take a
hwdec type anymore.
nvdec aka cuvid aka cuda should work much better than vdpau, and support
newer codecs (such as vp9), and more advanced surface formats (like 10
bit).
This requires moving the d3d hwaccels in the autoprobe order, since on
Windows, d3d decoding should be preferred over nvidia proprietary stuff.
Users of older drivers will need to force --hwdec=vdpau, since it could
happen that the vo_gpu cuda hwdec interop loads (so the vdpau interop is
not loaded), but the hwdec itself doesn't work.
I expect this does not break AMD (which still needs vdpau for vo_gpu
interop, until libva is fixed so it can fully support AMD).
This has stopped being useful a long time ago, and it's the only GPL
source file in the vo_gpu source directories. Recently it wasn't even
loaded at all, unless you forced loading it.
stdatomic.h defines no atomic_float typedef. We can't just use _Atomic
unconditionally, because we support compilers without C11 atomics. So
just create a custom atomic_float typedef in the wrapper, which uses
_Atomic in the C11 code path.
This does what af_volume used to do. Since we couldn't relicense it,
just rewrite it. Since we don't have a new filter mechanism yet, and the
libavfilter is too inconvenient, do applying the volume gain in ao.c
directly. This is done before handling the audio data to the driver.
Since push.c runs a separate thread, and pull.c is called asynchronously
from the audio driver's thread, the volume value needs to be
synchronized. There's no existing central mutex, so do some shit with
atomics. Since there's no atomic_float type predefined (which is at
least needed when using the legacy wrapper), do some nonsense about
reinterpret casting the float value to an int for the purpose of atomic
access. Not sure if using memcpy() is undefined behavior, but for now I
don't care.
The advantage of not using a filter is lower complexity (no filter auto
insertion), and lower latency (gain processing is done after our
internal audio buffer of at least 200ms).
Disavdantages include inability to use native volume control _before_
other filters with custom filter chains, and the need to add new
processing for each new sample type.
Since this doesn't reuse any of the old GPL code, nor does indirectly
rely on it, volume and replaygain handling now works in LGPL mode.
How to process the gain is inspired by libavfilter's af_volume (LGPL).
In particular, we use exactly the same rounding, and we quantize
processing for integer sample types by 256 steps. Some of libavfilter's
copyright may or may not apply, but I think not, and it's the same
license anyway.
Oops. This is part of the TV code, for which we didn't make any effort
to relicense. But files were always built, because they didn't depend on
the common TV code. (The HAVE_GPL in the source file exposed this by
making the build fail.)
These couldn't be relicensed, and won't survive the LGPL transition. The
other existing filters are mostly LGPL (except libaf glue code).
This remove the deprecated pan option. I guess it could be restored by
inserting a libavfilter filter (if there's one), but for now let it be
gone.
This temporarily breaks volume control (and things related to it, like
replaygain).
The internal stereo3d filter was removed due to being GPL only, and due
to being a mess that somehow used libavfilter's filter. Without this
filter, it's hard to remove our internal stereo3d image attribute, so
even using libavfilter's stereo3d filter would not work too well (unless
someone fixes it and makes it able to use AVFrame metadata, which we
then could mirror in mp_image).
This was never well thought-through anyway, so just drop it. I think
some "downsampling" support would still make sense, maybe that can be
readded later.
Now using libavfilter filters directly.
The rotation case is a bit lazy, because it uses the slow vf_rotate
filter in all cases, instead of using special filters for 90° step
rotations.
This was marked GPL, because the implementation in command.c (which is
shared with the subtitle code) was marked as GPL. This has been changed,
so this is unnecessary. The original commands for external audio tracks
have been added to mpv by someone who agreed with the relicensing.
They were added to the "to deleted" list and never relicensed, because I
thought I'd delete them early. But it's possible that they'll stay in
mpv for a longer time, so relicense them. Still leaving them as
deprecated and scheduled for removal, so they can still be dropped once
there is a better way to deal with them, if they get annoying, or if a
better mechanism is found that makes them unnecessary.
All contributors agreed. There are some minor changes by people who did
not agree, but these are all not relevant or have been removed.
Almost all of them had their guts removed and replaced by libavfilter
long ago, but remove them anyway. They're pointless and have been
scheduled for deprecation.
Still leave vf_format (because we need it in some form) and vf_sub (not
sure).
This will break some builtin functionality: lavfi yadif defaults are
different, auto rotation and stereo3d downconversion are broken. These
might be fixed later.
We want to drop vf_scale, but we still need a way to auto convert
between imgfmts. In particular, vf.c will auto insert the "scale" filter
if the VO doesn't support a pixfmt.
To avoid chaos, create a new vf_convert.c filter, based on vf_scale.c,
but without the unrelicensed code parts. In particular, this filter does
not do scaling and has no options. It merely converts from one imgfmt to
another, if needed.
Apparently a relatively widespread convention, and almost as strict as
the old "exact" semantics. (So it's not going to auto load radically
unrelated files.)
There has been no new developments or agreements, but I was uncertain
about the copyright status of them. Thus this part of code was marked as
being potentially GPL, and was not built in LGPL mode. Now I've taken a
close look again, and decided that these can be relicensed using the
existing relicensing agreements.
OSD level 3 was introduced in commit 8d190244, with the author being
unreachable. As I decided in commit 6ddd95fd, OSD level 3 itself can
be kept, but the "osd" command had to go, and the "rendering" of OSD
level 3 (the HAVE_GPL code in osd.c) was uncertain. But the code for
this was rewritten: instead of duplicating the time/percent formatting
code, it was changed to use common code, and some weird extra logic was
removed. The code inside of the "if" is exactly the same as the code
that formats the OSD status line (covered by LGPL relicensing).
The current commands for adding/removing sub/audio tracks more or less
originated from commit 2f376d1b39, with the author being unreachable.
But the original code was very different, mostly due to MPlayer's
incredibly messy handling of subtitles in general. Nothing of this
remains in the current code. Even the command declarations were
rewritten. The commands (as seen from the user side) are rather similar
in naming and semantics, but we don't consider this copyrightable. So it
doesn't look like anything copyrightable is left.
The add/cycle commands were more or less based on step_property,
introduced in commit 7a71da01d6, with the patch author disagreeing with
the LGPL relicensing. But all code original to the patch has been
replaced in later mpv changes, and the original code was mostly copied
from MP_CMD_SET_PROPERTY anyway. The underlying property interface was
completely changed, the error handling was redone, and all of this is
very similar to the changes that were done on SET_PROPERTY. The command
declarations are completely different in the first place, because the
semantic change from step to add/cycle. The commit also seems to have
been co-authored by reimar to some degree. He also had the idea to
change the original patch from making the command modify a specific
property to making it generic.
(The error message line, especially with its %g formatting, might
contain some level of originality, so change that just to be sure.
This commit Copies and adapts the error message for SET_PROPERTY.)
Although I'm a bit on the fence with all the above things, it really
doesn't look like there's anything substantial that would cause issues.
I thus claim that there is no problem with changing the license to LGPL
for the above things. It's probably still slightly below the standard
that was usually applied in the code relicensing in mpv, but probably
still far above to the usual in open source relicensing (and above
commercial standards as well, if you look what certain tech giants do).
Always display the duration as "unknown" if the duration is known. Also
fix that at least demux_lavf reported unknown duration as 0 (fix by
setting the default to unknown in demux.c).
Remove the dumb _u formatter function, and use a different approach to
avoiding displaying "unknown" as playback time on playback start (set
last_seek_pts for that).
Looks like this is covered by LGPL relicensing agreements now.
Notes about contributors who could not be reached or who didn't agree:
Commit 7fccb6486e has tons of mp_msg changes look like they are not
copyrightable (even if they were, all mp_msg calls were rewritten in
mpv times again). The additional play() change looks suspicious, but
the function was rewritten several times anyway (first time after that
commit in 4f40ec312).
Commit 89ed1748ae was rewritten in commit 325311af3 and then again
several times after that. Basically all this code is unnecessary in
modern mpv and has been removed.
No code survived from the following commits: 4d31c3c53, 61ecf838f2,
d38968bd, 4deb67c3f. At least two cosmetic typo fixes are not
considered as well.
Commit 22bb046ad is reverted (this wasn't a valid warning anyway, just
a C++-ism icc applied to C). Using the constants is nicer, but at least
I don't have to decide whether that change was copyrightable.
The D3D11_CREATE_DEVICE_BGRA_SUPPORT flag doesn't enable support for
BGRA textures. BGRA textures will be supported whether or not the flag
is passed. The flag just fails device creation if they are not supported
as an API convenience for programs that need BGRA textures, such as
programs that use D2D or D3D9 interop. We can handle devices without
BGRA support fine, so don't bother with the flag.
This sliences some warnings about unused values and statements with no
effect, but it also fixes a logic error with freelocale(), since
previously it would not work as expected when used in the body of an if
statement without braces.
Uses real functions, because with macros, I don't think there is a way
to silence the "statement with no effect" warnings in the case where the
return value of uselocale() is ignored.
As for replacing the these functions with working implementations, I
don't think this is possible for mpv's use-case, since MSVCRT does not
support UTF-8 locales, or any locale with multibyte characters that are
three or more bytes long. See:
https://docs.microsoft.com/en-us/cpp/c-runtime-library/reference/setlocale-wsetlocale
For consistency with already implemented shcore.dll
function loading in w32->api:
Moved loading of imm32.dll to w32_api_load, and declare
pImmDisableIME function pointer in the w32->api struct.
Removed unloading of imm32.dll.
This gives the filename or URL to the libavformat probing logic, which
might use the file extension as a "help" to decide which format the file
is. This helps with mp3 files that have large id3v2 tags and prevents
the idiotic ffmpeg probing logic to think that a mp3 file is amr.
(What we really want is knowing whether we _really_ need to feed more
data to libavformat to detect the format. And without having to pre-read
excessive amounts of data for relatively normal streams.)
Fix that libarchive fails to return filenames for UTF-8/UTF-16 entries.
The reason is that it uses locales and all that garbage, and mpv does
not set a locale.
Both C locales and wchar_t are shitfucked retarded legacy braindeath. If
the C/POSIX standard committee had actually competent members, these
would have been deprecated or removed long ago. (I mean, they managed to
remove gets().) To justify this emotional outbreak potentially insulting
to unknown persons, I will write a lot of text. Those not comfortable
with toxic language should pretend this is a religious text.
C locales are supposed to be a way to support certain languages and
cultures easier. One example are character codepages. Back when UTF-8
was not invented yet, there were only 255 possible characters, which is
not enough for anything but English and some european languages. So they
decided to make the meaning of a character dependent on the current
codepage. The locale (LC_CTYPE specifically) determines what character
encoding is currently used.
Of course nowadays, this is legacy nonsense. Everything uses UTF-8 for
"char", and what doesn't is broken and terrible anyway. But the old ways
stayed with us, and the stupidity of it as well.
C locales were utterly moronic even when they were invented. The locale
(via setlocale()) is global state, and global state is not a reasonable
way to do anything. It will break libraries, or well modularized code.
(The latter would be forced to strictly guard all entrypoints set
set/restore locales, assuming a single threaded world.)
On top of that, setting a locale randomly changes the semantics of a
bunch of standard functions. If a function respects locale, you suddenly
can't rely on it to behave the same on all systems. Some behavior can
come as a surprise, and of course it will be dependent on the region of
the user (it doesn't help that most software is US-centric, and the US
locale is almost like the C locale, i.e. almost what you expect).
Idiotically, locales were not just used to define the current character
encoding, but the concept was used for a whole lot of things, like e. g.
whether numbers should use "," or "." as decimal separaror. The latter
issue is actually much worse, because it breaks basic string conversion
or parsing of numbers for the purpose of interacting with file formats
and such.
Much can be said about how retarded locales are, even beyond what I just
wrote, or will wrote below. They are so hilariously misdesigned and
insufficient, I can't even fathom how this shit was _standardized_. (In
any case, that meant everyone was forced to implement it.) Many C
functions can't even do it correctly. For example, the character set
encoding can be a multibyte encoding (not just UTF-8, but awful garbage
like Shift JIS (sometimes called SHIT JIZZ), yet functions like
toupper() can return only 1 byte. Or just take the fact that the locale
API tries to define standard paper sizes (LC_PAPER) or telephone number
formatting (LC_TELEPHONE). Who the fuck uses this, or would ever use
this?
But the badness doesn't stop here. At some point, they invented threads.
And they put absolutely no thought into how threads should interact with
locales. So they kept locales as global state. Because obviously, you
want to be able to change the semantics of basic string processing
functions _while_ they're running, right? (Any thread can call
setlocale() at any time, and it's supposed to change the locale of all
other threads.)
At this point, how the fuck are you supposed to do anything correctly?
You can't even temporarily switch the locale with setlocale(), because
it would asynchronously fuckup the other threads. All you can do is to
enforce a convention not to set anything but the C local (this is what
mpv does), or to duplicate standard functions using code that doesn't
query locale (this is what e.g. libass does, a close dependency of mpv).
Imagine they had done this for certain other things. Like errno, with
all the brokenness of the locale API. This simply wouldn't have worked,
shit would just have been too broken. So they didn't. But locales give a
delicious sweet spot of brokenness, where things are broken enough to
cause neverending pain, but not broken enough that enough effort would
have spent to fix it completely.
On that note, standard C11 actually can't stringify an error value. It
does define strerror(), but it's not thread safe, even though C11
supports threads. The idiots could just have defined it to be thread
safe. Even if your libc is horrible enough that it can't return string
literals, it could just just some thread local buffer. Because C11 does
define thread local variables. But hey, why care about details, if you
can just create a shitty standard?
(POSIX defines strerror_r(), which "solves" this problem, while still
not making strerror() thread safe.)
Anyway, back to threads. The interaction of locales and threads makes no
sense. Why would you make locales process global? Who even wanted it to
work this way? Who decided that it should keep working this way, despite
being so broken (and certainly causing implementation difficulties in
libc)? Was it just a fucked up psychopath?
Several decades later, the moronic standard committees noticed that this
was (still is) kind of a bad situation. Instead of fixing the situation,
they added more garbage on top of it. (Probably for the sake of
"compatibility"). Now there is a set of new functions, which allow you
to override the locale for the current thread. This means you can
temporarily override and restore the local on all entrypoints of your
code (like you could with setlocale(), before threads were invented).
And of course not all operating systems or libcs implement this. For
example, I'm pretty sure Microsoft doesn't. (Microsoft got to fuck it up
as usual, and only provides _configthreadlocale(). This is shitfucked on
its own, because it's GLOBAL STATE to configure that GLOBAL STATE should
not be GLOBAL STATE, i.e. completely broken garbage, because it requires
agreement over all modules/libraries what behavior should be used. I
mean, sure, makign setlocale() affect only the current thread would have
been the reasonable behavior. Making this behavior configurable isn't,
because you can't rely on what behavior is active.)
POSIX showed some minor decency by at least introducing some variations
of standard functions, which have a locale argument (e.g. toupper_l()).
You just pass the locale which you want to be used, and don't have to do
the set locale/call function/restore locale nonense. But OF COURSE they
fucked this up too. In no less than 2 ways:
- There is no statically available handle for the C locale, so you have
to initialize and store it somewhere, which makes it harder to make
utility functions safe, that call locale-affected standard functions
and expect C semantics. The easy solution, using pthread_once() and a
global variable with the created locale, will not be easily accepted
by pedantic assholes, because they'll worry about allocation failure,
or leaking the locale when using this in library code (and then
unloading the library). Or you could have complicated library
init/uninit functions, which bring a big load of their own mess.
Same for automagic DLL constructors/destructors.
- Not all functions have a variant that takes a locale argument, and
they missed even some important ones, like snprintf() or strtod() WHAT
THE FUCK WHAT THE FUCK WHAT THE FUCK WHAT THE FUCK WHAT THE FUCK WHAT
THE FUCK WHAT THE FUCK WHAT THE FUCK WHAT THE FUCK
I would like to know why it took so long to standardize a half-assed
solution, that, apart from being conceptually half-assed, is even
incomplete and insufficient. The obvious way to fix this would have
been:
- deprecate the entire locale API and their use, and make it a NOP
- make UTF-8 the standard character type
- make the C locale behavior the default
- add new APIs that explicitly take locale objects
- provide an emulation layer, that can be used to transparently build
legacy code without breaking them
But this wouldn't have been "compatible", and the apparently incompetent
standard committees would have never accepted this. As if anyone
actually used this legacy garbage, except other legacy garbage. Oh yeah,
and let's care a lot about legacy compatibility, and let's not care at
all about modern code that either has to suffer from this, or subtly
breaks when the wrong locales are active.
Last but not least, the UTF-8 locale name is apparently not even
standardized. At the moment I'm trying to use "C.UTF-8", which is
apparently glibc _and_ Debian specific. Got to use every opportunity to
make correct usage of UTF-8 harder. What luck that this commit is only
for some optional relatively obscure mpv feature.
Why is the C locale not UTF-8? Why did POSIX not standardize an UTF-8
locale? Well, according to something I heard a few years ago, they're
considering disallowing UTF-8 as locale, because UTF-8 would violate
certain ivnariants expected by C or POSIX. (But I'm not sure if I
remember this correctly - probably better not to rage about it.)
Now, on to libarchive.
libarchive intentionally uses the locale API and all the broken crap
around it to "convert" UTF-8 or UTF-16 (as contained in reasonably sane
archive formats) to "char*". This is a good start!
Since glibc does not think that the C locale uses UTF-8, this fails for
mpv. So trying to use archive_entry_pathname() to get the archive entry
name fails if the name contains non-ASCII characters.
Maybe use archive_entry_pathname_utf8()? Surely that should return
UTF-8, since its name seems to indicate that it returns UTF-8. But of
fucking course it doesn't! libarchive's horribly convoluted code (that
is full of locale API usage and other legacy shit, as well as ifdefs and
OS specific code, including Windows and fucking Cygwin) somehow fucks up
and fails if the locale is not set to UTF-8. I made a PR fixing this in
libarchive almost 2 years ago, but it was ignored.
So, would archive_entry_pathname_w() as fallback work? No, why would it?
Of course this _also_ involves shitfucked code that calls shitfucked
standard functions (or OS specific ifdeffed shitfuck). The truth is that
at least glibc changes the meaning of wchar_t depending on the locale.
Unlike most people think, wchar_t is not standardized to be an UTF
variant (or even unicode) - it's an encoding that uses basic units that
can be larger than 8 bit. It's an implementation defined thing. Windows
defines it to 2 bytes and UTF-16, and glibc defines it to 4 bytes and
UTF-32, but only if an UTF-8 locale is set (apparently).
Yes. Every libarchive function dealing with strings has 3 variants:
plain, _utf8, and _w. And none of these work if the locale is not set.
I cannot fathom why they even have a wchar_t variant, because it's
redundant and fucking useless for any modern code.
Writing a UTF-16 to UTF-8 conversion routine is maybe 3 pages of code,
or a few lines if you use iconv. But libarchive uses all this glorious
bullshit, and ends up with 3 not working API functions, and with over
4000 lines of its own string abstraction code with gratuitous amounts of
ifdefs and OS dependent code that breaks in a fairly common use case.
So what we do is:
- Use the idiotic POSIX 2008 API (uselocale() etc.) (Too bad for users
who try to build this on a system that doesn't have these - hopefully
none are left in 2017. But if there are, torturing them with obscure
build errors is probably justified. Might be bad for Windows though,
which is a very popular platform except on phones.)
- Use the "C.UTF-8" locale, which is probably not 100% standards
compliant, but works on my system, so it's fine.
- Guard every libarchive call with uselocale() + restoring the locale.
- Be lazy and skip some libarchive calls. Look forward to the unlikely
and astonishingly stupid bugs this could produce.
We could also just set a C UTF-8 local in main (since that would have no
known negative effects on the rest of the code), but this won't work for
libmpv.
We assume that uselocale() never fails. In an unexplainable stroke of
luck, POSIX made the semantics of uselocale() nice enough that user code
can fail failures without introducing crash or security bugs, even if
there should be an implementation fucked up enough where it's actually
possible that uselocale() fails even with valid input.
With all this shitty ugliness added, it finally works, without fucking
up other parts of the player. This is still less bad than that time when
libquivi fucked up OpenGL rendering, because calling a libquvi function
would load some proxy abstraction library, which in turn loaded a KDE
plugin (even if KDE was not used), which in turn called setlocale()
because Qt does this, and consequently made the mpv GLSL shader
generation code emit "," instead of "." for numbers, and of course only
for users who had that KDE plugin installed, and lived in a part of the
world where "." is not used as decimal separator.
All in all, I believe this proves that software developers as a whole
and as a culture produce worse results than drug addicted butt fucked
monkeys randomly hacking on typewriters while inhaling the fumes of a
radioactive dumpster fire fueled by chinese platsic toys for children
and Elton John/Justin Bieber crossover CDs for all eternity.
If the backbuffer is much larger than the forward buffer, and if you
join a small range with a large range (larger than the forward buffer),
then the seek issues to the end of the range after joining will overflow
the queue.
Normally, read_more will be false when the forward buffer is full, but
the resume seek after joining will set need_refresh to true, which
forces more reading and thus triggers the overfloe warning.
Attempt to fix this by not setting read_more to true on refresh seeks.
Set prefetch_more instead. read_more will still be set if an A/V stream
has no data.
This doesn't help with the following problems related to using refresh
seeks for track switching:
- If the forward buffer is full, then enabling another track will
obviously immediately overflow the queue, and immediately lead to
marking the new track as having no more data (i.e. EOF). We could cut
down the forward buffer or so, but there's no simple way to implement
it. Another possibility would be dropping all buffers and trying to
resume again, but this would likely be complex as well.
- Subtitle tracks will not even show a warning (because they are sparse,
and we have no way of telling whether a packet is missing, or there's
just no packet near the current position). Before this commit,
enabling an empty subtitle track would probably have overflown the
queue, because ds->refreshing was never set to true. Possibly this
could be solved by determining a demuxer read position, which would
reflect until which PTS all subtitle packets should have been demuxed.
The forward buffer limit was intended as a last safeguard to avoid
excessive memory usage against badly interleaved files or decoders going
crazy (up to reading the whole into memory and OOM'ing the user's
system). It's not good at all to limit prefetch. Possibly solutions
include having another smaller limit for prefetch, or maybe having only
a total buffer limit, and discarding back buffer if more data has to be
read. The current solution is making the forward buffer larger than the
forward duration (--cache-secs) would require, but of course this
depends on the stream's bitrate.
The option for enabling it has now an "auto" choice, which is the
default, and which will enable it if the media is thought to be via
network or if the stream cache is enabled (same logic as --cache-secs).
Also bump the --cache-secs default from 10 to 120.
Some back buffer is required to make the immediate forward range
seekable. This is because the back buffer limit is strictly enforced.
Just set a rather high back buffer by default. It's not use if
--demuxer-seekable-cache is disabled, so this is without risk.
Limit the number of cached ranges to MAX_SEEK_RANGES, which is the same
number of maximally exported seek ranges. It makes no sense to keep
them, as the user won't see them anyway. Remove the smallest ones to
enforce the limit if the number grows too high.
Helps a little bit, I guess. But in general, t(h)rashing the cache kills
us anyway.
This has a fixed number of index entries. Entries are added/removed as
packets go through the packet queue. Only keyframes after index_distance
seconds are added. If there are too many keyframe packets, the existing
index is reduced by half, and index_distance is doubled. This should
provide somewhat even spacing between the entries.
The packet queue is sorted, so we can stop the search if we have found a
packet, and the next packet in the queue has a higher PTS than the seek
PTS (for the sake of SEEK_FORWARD, we still consider the first packet
with a higher PTS).
Also, as a mostly cosmetic change, but which might be "faster", check
target for NULL, instead of target_diff for a magic float value.
Subtitle streams are sparse, and no overlap is required to correctly
join two cached ranges. This was not correctly handled iff the two
ranges had different subtitle packets close to the join point.
demux_add_packet() must completely ignore any packets that are added
while a queued seek is not initiated yet.
The main issue is that after setting in->seeking==true, the central lock
is released, and it can take "a while" until it's reacquired on the
demux thread and the seek is actually initiated. During that time,
packets could be read and added, that have nothing to do with the new
state.
Seems like the last refactor to this code broke playing flipped images,
at least with --opengl-pbo --gpu-api=opengl.
Flipping is rather a shitmess. The main problem is that OpenGL does not
support flipped uploading. The original vo_gl implementation considered
it important to handle the flipped case efficiently, so instead of
uploading the image line by line backwards, it uploaded it flipped, and
then flipped it in the renderer (basically the upload path ignored the
flipping). The ra code and backends probably have an insane and
inconsistent mix of semantics, so fix this by never passing it flipped
images in the first place.
In the future, the backends should probably support flipped images
directly.
Fixes#5097.
If subtitles are part of the stream, determining the seekable range
becomes harder. Subtitles are sparse, and can have packets in irregular
intervals, or even completely lack packets. The usual logic of computing
the seek range by the min/max packet timestamps fails.
Solve this by making the only assumption we can make: subtitle packets
are implicitly demuxed along with other packets. We also assume perfect
interleaving for this, but you really can't do anything with sparse
packets that makes sense without this assumption.
One special case is if we prune sparse packets within the current
seekable range. Obviously this should limit the seekable range to after
the pruned packet.
Instead of weirdly deciding this on every packet read and having the
code far away from where it's actually needed, just run it where it's
actually needed.
A typical idiom for calling functions that remove something from the
array being iterated, but it's not needed here. I have no idea why this
was ever done.
Setting ds->refreshing for unselected streams could lead to a
nonsensical queue overflow warning, because read_packet() took it as a
reason to continue reading.
Also add some more information to the queue overflow warning (even if
that one doesn't have anything to do with this bug - it was for
unselected streams only).
This fixes an endless loop with threading disabled, such as for example
when playing a file with an external subtitle file, and seeking to the
beginning. Something will set in->seeking, but the seek is never
executed, which made demux_read_packet() loop endlessly. (External
subtitles will use non-threaded mode for whatever reasons.)
Fix this by by making the unthreaded code to execute the worker thread
body, which reduces the difference in logic.
Until now, the demuxer cache was limited to a single range. Extend this
to multiple range. Should be useful for slow network streams.
This commit changes a lot in the internal demuxer cache logic, so
there's a lot of room for bugs and regressions. The logic without
demuxer cache is mostly untouched, but also involved with the code
changes. Or in other words, this commit probably fucks up shit.
There are two things which makes multiple cached ranges rather hard:
1. the need to resume the demuxer at the end of a cached range when
seeking to it
2. joining two adjacent ranges when the lowe range "grows" into it (and
resuming the demuxer at the end of the new joined range)
"Resuming" the demuxer means that we perform a low level seek to the end
of a cached range, and properly append new packets to it, without adding
packets multiple times or creating holes due to missing packets.
Since audio and video never line up exactly, there is no clean "cut"
possible, at which you could resume the demuxer cleanly (for 1.) or
which you could use to detect that two ranges are perfectly adjacent
(for 2.). The way how the demuxer interleaves multiple streams is also
unpredictable. Typically you will have to expect that it randomly allows
one of the streams to be ahead by a bit, and so on.
To deal with this, we have heuristics in place to detect when one packet
equals or is "behind" a packet that was demuxed earlier. We reuse the
refresh seek logic (used to "reread" packets into the demuxer cache when
enabling a track), which checks for certain packet invariants.
Currently, it observes whether either the raw packet position, or the
packet DTS is strictly monotonically increasing. If none of them are
true, we discard old ranges when creating a new one.
This heavily depends on the file format and the demuxer behavior. For
example, not all file formats have DTS, and the packet position can be
unset due to libavformat not always setting it (e.g. when parsers are
used).
At the same time, we must deal with all the complicated state used to
track prefetching and seek ranges. In some complicated corner cases, we
just give up and discard other seek ranges, even if the previously
mentioned packet invariants are fulfilled.
To handle joining, we're being particularly dumb, and require a small
overlap to be confident that two ranges join perfectly. (This could be
done incrementally with as little overlap as 1 packet, but corner cases
would eat us: each stream needs to be joined separately, and the cache
pruning logic could remove overlapping packets for other streams again.)
Another restriction is that switching the cached range will always
trigger an asynchronous low level seek to resume demuxing at the new
range. Some users might find this annoying.
Dealing with interleaved subtitles is not fully handled yet. It will
clamp the seekable range to where subtitle packets are.
Build ffmpeg-mpv, shaderc and crossc from source, since they are not
packaged in MSYS2. Also, add some more explicit --enable flags to the
mpv build to make sure things like D3D11, D3D11VA hwaccels and Vulkan
are auto-detected.
Like the manual says, this is technically undefined behaviour. See:
https://msdn.microsoft.com/en-us/library/windows/desktop/ff476085.aspx
In particular, MSDN says texture arrays created with the BIND_DECODER
flag cannot be used with CreateShaderResourceView, which means they
can't be sampled through SRVs like normal Direct3D textures. However,
some programs (Google Chrome included) do this anyway for performance
and power-usage reasons, and it appears to work with most drivers.
Older AMD drivers had a "bug" with zero-copy decoding, but this appears
to have been fixed. See #3255, #3464 and http://crbug.com/623029.
The shader cache in ra_d3d11 caches the result of shaderc, crossc and
the D3DCompiler DLL, so it should be invalidated when any of those
components are updated. This should make the cache more reliable, which
makes it safer to enable gpu-shader-cache-dir. Shader compilation is
slow with D3D11, so gpu-shader-cache-dir is highly necessary
Some shaders take a _long_ time to compile with the Direct3D compiler.
The ANGLE backend had this problem too, to a certain extent. Logging
should help identify which shaders cause long stalls and could also help
with benchmarking ways of reducing compile times.
ra_d3d11 uses the SPIR-V compiler to translate GLSL to SPIR-V, which is
then translated to HLSL. This means it always exposes the same GLSL
version that the SPIR-V compiler supports (4.50 for shaderc/glslang.)
Despite claiming to support GLSL 4.50, some features that are tied to
the GLSL version in OpenGL are not supported by ra_d3d11 when targeting
legacy Direct3D feature levels.
This includes two features that mpv relies on:
- Reading from gl_FragCoord in the fragment shader (requires FL 10_0)
- textureGather from any texture component (requires FL 11_0)
These features have been exposed as new RA caps.
This is a new RA/vo_gpu backend that uses Direct3D 11. The GLSL
generated by vo_gpu is cross-compiled to HLSL with SPIRV-Cross.
What works:
- All of mpv's internal shaders should work, including compute shaders.
- Some external shaders have been tested and work, including RAVU and
adaptive-sharpen.
- Non-dumb mode works, even on very old hardware. Most features work at
feature level 9_3 and all features work at feature level 10_0. Some
features also work at feature level 9_1 and 9_2, but without high-bit-
depth FBOs, it's not very useful. (Hardware this old is probably not
fast enough for advanced features anyway.)
Note: This is more compatible than ANGLE, which requires 9_3 to work
at all (GLES 2.0,) and 10_1 for non-dumb-mode (GLES 3.0.)
- Hardware decoding with D3D11VA, including decoding of 10-bit formats
without truncation to 8-bit.
What doesn't work / can be improved:
- PBO upload and direct rendering does not work yet. Direct rendering
requires persistent-mapped PBOs because the decoder needs to be able
to read data from images that have already been decoded and uploaded.
Unfortunately, it seems like persistent-mapped PBOs are fundamentally
incompatible with D3D11, which requires all resources to use driver-
managed memory and requires memory to be unmapped (and hence pointers
to be invalidated) when a resource is used in a draw or copy
operation.
However it might be possible to use D3D11's limited multithreading
capabilities to emulate some features of PBOs, like asynchronous
texture uploading.
- The blit() and clear() operations don't have equivalents in the D3D11
API that handle all cases, so in most cases, they have to be emulated
with a shader. This is currently done inside ra_d3d11, but ideally it
would be done in generic code, so it can take advantage of mpv's
shader generation utilities.
- SPIRV-Cross is used through a NIH C-compatible wrapper library, since
it does not expose a C interface itself.
The library is available here: https://github.com/rossy/crossc
- The D3D11 context could be made to support more modern DXGI features
in future. For example, it should be possible to add support for
high-bit-depth and HDR output with DXGI 1.5/1.6.
Backported from @haasn's change to libplacebo, except in the current RA,
there's nothing to indicate an ra_format can be bound as a storage
image, so there's no way to force all of these formats to have a
glsl_format. Instead, the layout qualifier will be removed if
glsl_format is NULL.
This is needed for the upcoming ra_d3d11 backend. In Direct3D 11, while
loading float values from unorm images often works as expected, it's
technically undefined behaviour, and in Windows 10, it will cause the
debug layer to spam the log with error messages. Also, apparently in
GLSL, the format name must match the image's format exactly (but in
Direct3D, it just has to have the same component type.)
Backported from @haasn's change to libplacebo. More flexible than the
previous "shared || non-shared" distinction. The extra flexibility is
needed for Direct3D 11, but it also doesn't hurt code-wise.
For some reason vo_lavc's draw_image can buffer the frame and encode it
only later. Also, there is logic for rendering the OSD (i.e. subtitles)
only when needed.
In theory this can lead to subtitles being pruned before it tries to
render them (as the subtitle logic doesn't know that the VO still needs
them later), although this probably never happens in reality.
The worse issue, that actually happened, is that if the last frame gets
buffered, it attempts to render subtitles in the uninit callback. At
this point, the subtitle decoder is already torn down and all subtitles
removed, thus it will draw nothing. This didn't always happen. I'm not
sure why - potentially in the working cases, the frame wasn't buffered.
Since this logic doesn't have much worth, except a minor performance
advantage if frames with subtitles are dropped, just remove it.
Hopefully fixes#4689.
libavcodec can't deal with them, because its API doesn't distinguish
between 0 sized packets and sending EOF. As such, keeping them doesn't
do any good, ever. This actually fixes some obscure mkv sample (see
previous commit).
Fixes some obscure sample that uses fixed size laces with 0-sized lace
size. Some broken shit. (Maybe the decoder wouldn't care about these
packets, but the demuxer attempted to resync after these packet reading
errors, even though they were perfectly recoverable. But I don't care
enough about this.)
Sample link: https://samples.ffmpeg.org/Matroska/switzler084d_dl.mkv
This directly reads individual mkv sub-packets (block laces) into a
dedicated AVBufferRefs, which can be directly used for creating packets
without a additional copy of the packet data. This also means we switch
parsing of block header fields and lacing metadata to read directly from
the stream, instead of a memory buffer.
This could have been much easier if libavcodec didn't require padding
the packet data with zero bytes. We could just have each packet
reference a slice of the block data. But as it is, the only way to get
padding without a copy is to read the laces into individually allocated
(and padded) memory block, which required a larger rewrite.
This probably makes recovering from broken mkv files slightly worse if
the transport is unseekable. We just read, and then check if we've
overread. But I think that shouldn't be a real concern.
No actual measureable performance change. Potential for some
regressions, as this is quite intrusive, and touches weird obscure shit
like mkv lacing. Still keeping it because I like how it removes some
redundant EBML parsing functions.
This adds a bunch of stuff (mostly unused or redundant) as preparation
for supporting multiple seek ranges. Actual support is probably still
far away.
One change that messes deeper with the actual code is that we account
for total buffered bytes instead of just the backwards bytes now. This
way, prune_old_packets() doesn't have to iterate over all seek ranges to
determine whether something needs pruning.
The main purpose of this commit is avoiding any hidden O(n^2) algorithms
in the code for pruning the demuxer cache, and for determining the
seekable boundaries of the cache. The old code could loop over the whole
packet queue on every packet pruned in certain corner cases.
There are two ways how to reach the goal:
1) commit a cardinal sin
2) do everything incrementally
The cardinal sin is adding an extra field to demux_packet, which caches
the determined seekable range for a keyframe range. demux_packet is a
rather general data structure and thus shouldn't have any fields that
are not inherent to its use, and are only needed as an implementation
detail of code using it. But what are you gonna do, sue me?
In the future, demux.c might have its own packet struct though. Then the
other existing cardinal sin (the "next" field, from MPlayer times) could
be removed as well.
This commit also changes slightly how the seek end is determined. There
is a note on the manpage in case anyone finds the new behavior
confusing. It's somewhat cleaner and might be needed for supporting
multiple ranges (although that's unclear).
The demuxer cache seeking mechanism looks at keyframe ranges to
determine the earlierst PTS of a packet. Instead of looping over all
packets twice (once to find the next keyframe, a second time to find the
seek PTS), do it in one go.
For that basically turn recompute_keyframe_target_pts() into an
iteration functionn. Functionality should be unchanged with this commit.
The base_ts field is used to guess the decoder position, and when set to
NOPTS, it just read ahead arbitrarily. Also demux_add_packet() sets
base_ts to the new timestamp when appending a packet, which would also
make it readahead by a too large amount.
Fix this by setting base_ts after a seek. This assumes that normally, a
cached seek target will always have the timestamp set. This is actually
not quite clear (as it calls recompute_keyframe_target_pts(), which
looks at multiple packets), but maybe it works well enough.
Don't do any of the extra work related to pruning the backbuffer if
demuxer cache seeking is disabled.
As a small extra, always prune packets with no timestamps immediately,
or queue heads that are not keyframes. (Both of them would be pruned
from the backbuffer by the normal logic anyway.)
If fulfilling --demuxer-readahead-secs requires more memory than allowed
by --demuxer-max-bytes, the queue obviously overflows. But the warning
is normally only for the case when trying to find the next video or
audio packet fails, and decoding can't continue.
Use a separate variable for determining whether to prefetch, and if the
queue has overflown, skip the message. In fact, skip the EOF setting and
waking up the decoder thread as well, because the EOF flag should not be
(have been) set in this situation, and waking up the reader thread helps
only if the EOF state changed.
Repeating frames (for display-sync) is not supposed to render the entire
frame again. When using hardware decoding, it unfortunately did: the
renderer uses the frame ID to check whether the frame data changed, and
unmapping the hwdec frame clears it.
Essentially reverts commit 761eeacf54. Back then I probably
thought it would be a good idea to release the hwdec image quickly in
order to return it to the decoder, but they're referenced anyway.
This should increase the performance and reduce GPU work.
In a shit show of subtle corner case interactions, making the demuxer
cache buffer the entire file can display a small buffered time if
subtitles are enabled. The reason is that some subtitle decoders may
read in advance infinitely, i.e. they read the entire subtitle stream.
Then, since the other streams (audio/video) have logically reached EOF,
and the subtitle stream is set to ds->active==true. This will have to be
fixed properly later to account buffering for subtitle-only files
(another corner case) correctly, but for now this is less annoying.
We don't hope to auto-detect them at load time, as that would be too
much of a pain - even FFmpeg requires fetching and parsing of video
packets, and exposes the information only via deprecated API.
But there still needs to be a way to select them by default. This is
also needed to get the first CC packet at all (without seeking back).
This commit also attempts to clean up locking a bit, which is a PITA,
but it's better be careful & clean.
Normally such code is didsabled by have_mglsl==false in
check_gl_features(), but apparently not this one.
Just fix it. Seems also more readable.
Fixes#5069.
Apparently this is required, but it doesn't check for it. To be fair,
this was tested by creating a compatibility context and pretending it's
GL 2.1. GL_ARB_shader_storage_buffer_object actually requires GL 4.0 or
up, but GL_ARB_uniform_buffer_object requires only GL 2.0.
According to
https://github.com/libarchive/libarchive/pull/773#issuecomment-334892291
we're not allowed to "continue reading" (post above) or performing "more
operations" (comments in archive.h header), whatever that means. Assume
closing and freeing the archive is still ok.
Since the codec already includes logic for closing and reopening the
archive for seeking in unseekable archives, this probably isn't too bad.
Untested due to lack of crashing sample (I lost my original test case,
and as recently user-provided one didn't crash).
Apparently some people want this. Actually making it compile is still
their problem, though, and I expect that build with FFmpeg upstream will
occasionally be broken (as it is right now). This is because mpv also
relies on API provided by Libav, and if FFmpeg hasn't merged that yet,
it's not our problem - we provide a version of FFmpeg upstream with
those changes merged, and it's called ffmpeg-mpv.
Also adjust the README which still talked about FFmpeg releases.
vo_gpu.c will call gl_video_icc_auto_enabled() to check whether it
should retrieve the ICC profile. But the value returned by this function
will be outdated, because gl_video_update_options() is not called yet.
Change the order of function calls so that this is done after updating
the options.
(This is fairly chaotic, but I guess this code will be refactored a
dozen of times anyway in the future.)
All this code used to be required by the old variants of the libavcodec
hw decoding APIs. Almost all of that is gone, although the mediacodec
API unfortunately still pulls in some old stuff (but not all of it).
(mediacodec build/functionality is untested, but should work.)
All of this was dead code and completely unused.
get_buffer2_hwdec() is the biggest chunk. One unfortunate thing about it
is that, while it was active, it could perform a software fallback much
faster, because it didn't have to wait until a full frame is decoded (it
actually decoded a full frame, but the current code has to decode many
more frames due to the codec delay, because the current code waits until
the API returns a decoded frame.) We should probably restore the latter,
although since it's an optional optimization, and the current behavior
doesn't change with the removal of this code, don't actually do anything
about it.
This is where it should be. It only wasn't because of an old libavcodec
bug, that returned the side data only on every IDR. This required some
sort of caching, which is now dropped. (mp_image wouldn't have been able
to do this kind of caching, because this code is stateless.) We don't
support these old libavcodec versions anymore, which is why this is not
needed anymore.
Also move initialization of rotation/stereo stuff to dec_video.c.
This simply didn't work. Unlike cuda-copy, this is a true hwaccel, and
obviously we need to provide it a device.
Implement this in a relatively generic way, which can probably reused
directly by videotoolbox (not doing this yet because it would require
testing on OSX).
Like with cuda-copy, --cuda-decode-device is ignored. We might be able
to provide a more general way to select devices at some later point.
This is just a dumb consequence of HWDEC_ types somehow being part of
both decoder and VO. Obviously, the VO should only care about supporting
specific hardware surface types or providing specific device types, but
until they are separated, stupid unintuitive mismatches will occur.
Somewhat useful for debugging. Unfortunately libass (or something else)
strips leading whitespace, making it look slightly more ugly than
necessary. Still an improvement.
Even though only 1 seek range is supported at the time.
Other than preparation for possibly future features, the main gain is
actually that we finally separate the reporting for the buffering, and
the seek ranges. These can be subtly different, so it's good to have a
clear separation.
This commit also fixes that the ts_reader wasn't rebased to the start
time, which could make the player show "???" for buffered cache amount
in some .ts files and others (especially at the end, when ts_reader
could become higher than ts_max). It also fixes writing the cache-end
field in the demuxer-cache-state property: it checked ts_start against
NOPTS, which makes no sense.
ts_start was never used (except for the bug mentioned above), so get rid
of it completely. This also makes it convenient to move the segment
check for last_ts to the demux_add_packet() function.
The current invocation of bstr_cut is as good as no cutting at all.
Almost the entire header is reread in every iteration of the loop.
I don't know how many styles libavcodec tends to generate, but if
(now or in the future) it generates many, then this loop is slow
for no good reason. If anything, the code would be more clear and
have the same performance if it didn't call bstr_cut at all.
The intention here (and the sensible thing regardless) seems to be
to skip the part of the string that bstr_find has already looked
through and found nothing. This commit additionally skips the whole
substring, because overlapping matches are impossible.
See manpage additions.
(In ffmpeg-mpv and Libav, this is still called "cuvid". Libav won't work
yet, because it has no frame params support yet, but this could get
fixed soon.)
It isn't all that reliable, and improving it would make startup slower
and require more complexity. There isn't even a good reason to do this
(other than semi-broken mkv files), so don't do it. Also see previous
commit.
In some cases, demux_mkv will detect a start time slightly above 0, but
there might still be a subtitle starting at exactly 0. When the player
rebases the timestamps to assumed start time, the subtitle will have a
slightly negative timestamp in the end. libavcodec's subtitle converter
turns this into a larger number due to underflow. Fix by clamping
subtitles always to 0, which may or may not be what you want.
At least it fixes#5047.
This is required now. Can't have FFmpeg upstream randomly break us and
then not fix it (like this recent EOF issue).
Upstream FFmpeg is of course still supported, but you will need to edit
the build scripts. Official support is only with the master branch of
our own repo.
This removes the need for codec- and API-specific knowledge in the
libavcodec hardware acceleration API user. For mpv, this removes the
need for vd_lavc_hwdec.pixfmt_map and a few other things. (For now, we
still keep the "old" parts for the sake of supporting older Libav, and
FFgarbage.)
params->rc was ignored in the calculation for the buffer size. I fucking
hate this stupid ra_tex_upload signature where *rc is randomly relevant
or not.
Coverity complains about this, but it's probably a false positive.
Anyway, rewrite it in a slightly more readable way. Now it's more
obvious that it is correct.
I _think_ this confuses Coverity and it thinks there is uninitialized
data to be read. Initialize the array to change/remove the warning, or
if there's a real problem, to make it easier to detect. (Basically apply
defensive coding.)
Even if the demuxer cache does not multiple ranges yet. This is to
reduce the pain should caching of multiple ranges ever be implemented.
Also change it from the sub properties stuff to return a mpv_node
directly, which is less roundabout. Sub-property access won't work
anymore, though.
Remove the seekable-start/-end fields as well, as they're redundant with
the ranges.
All this would normally be considered an API change, but since it's been
only a few days with no known users, change it immediately.
This adds some node.c helpers as well, as the code would be too damn
fugly otherwise.
Should speed up seeks.
(Unfortunately it's useless for backstepping. Backstepping is like
precise seeking, except we're unable to drop frames, as we can't know
the previous frame if we drop it.)
Comparing mpv's implementation against the ACES ODR reference samples
and algorithms, it seems like they're happy desaturating highlights
_way_ more aggressively than mpv currently does. And indeed, looking at
some example clips like The Redwoods (which is actually well-mastered),
the current desaturation produces unnatural-looking brightness fringes
where the sky meets the treeline.
Adjust the algorithm to make it apply to a much larger, more gradual
brightness region; and change the interpretation of the parameter. As a
bonus, the new parameter is actually sanely scaled (higher values = more
desaturation). Also, make it scale based on the signal level instead of
the luminance, to avoid under-desaturating bright blues.
Avoids that cache seeking is not possible with files that have audio
frames with no timestamps (such as avi, sometimes mkv sub-packets from
lacing). These would set back_pts (first seekable PTS) to NOPTS, and
thus disable cache seeking completely. Instead, prune such packets until
we find one with timestamps.
One corner case is that the new next good packet might be in the forward
cache. In this case we defer dropping until the next time this code is
run, and the reader position has possibly moved past the drop point.
In theory, start/ts_min could be set to NOPTS, in which case
"pts < start" for a valid pts would always evaluate to false.
Also remove the redundant "in-cache seek is possible.." message, as
there's always another message when cache seeks are done.
The seek range computation ignored streams with no timestamps. For
things like buffer estimation this is OK and wanted, but the seek range
needs to be conservative.
Which parts of the queue are considered forward or backward cache
depends on ds->reader_header. The packet at ds->reader_head, as well as
all packets following it (via the ->next field) are considered forward.
The fw_packs/fw_bytes/bw_bytes must be updated accordingly.
This broke in demux_add_packet(), when ds->reader_head was _not_ set on
the first packet (or before). This could happen since commit
05ae571241, which can require skipping packets (so they immediately end
up in the backbuffer).
With the timeline code, a packet at the start or end of a segment can
refer to an invisible frame. So it doesn't extend the seek range, and
the timestamp should be clipped to the actual segment range.
Also restructure recompute_keyframe_target_pts() to be hopefully less
confusing.
Restores some behavior from before the demuxer cache changes, though
affects mostly just OSD display. The unknown queue state is reserved for
streams with missing or messed up timestamps.
Fully fixes behavior of the files mentioned in the previous commit. Will
probably lead to worse behavior if someone tries to fix real video and
cover art tracks, but that's a broken fringe case anyway.
This fixes .cue files with audio files that contain attached pictures to
some degree. demux_timeline.c just discarded packets with unset index,
so the picture was never fed to the decoder.
Directory-opening never worked on Windows because MSVCRT's open()
doesn't open directories and its fstat() doesn't recognise directory
handles. These are just MSVCRT restrictions, and the Windows API itself
has no problem with opening directories as file objects, so reimplement
mpv's mp_open and mp_stat to use the Windows API directly. This should
fix directory playback.
This also populates the st_dev and st_ino fields of struct stat, so
filesystem loop checking in demux_playlist.c should now work on Windows.
Fixes#4711
The new_segment field was used to track the decoder data flow handler of
timeline boundaries, which are used for ordered chapters etc. (anything
that sets demuxer_desc.load_timeline). This broke seeking with the
demuxer cache enabled. The demuxer is expected to set the new_segment
field after every seek or segment boundary switch, so the cached packets
basically contained incorrect values for this, and the decoders were not
initialized correctly.
Fix this by getting rid of the flag completely. Let the decoders instead
compare the segment information by content, which is hopefully enough.
(In theory, two segments with same information could perhaps appear in
broken-ish corner cases, or in an attempt to simulate looping, and such.
I preferred the simple solution over others, such as generating unique
and stable segment IDs.)
We still add a "segmented" field to make it explicit whether segments
are used, instead of doing something silly like testing arbitrary other
segment fields for validity.
Cached seeking with timeline stuff is still slightly broken even with
this commit: the seek logic is not aware of the overlap that segments
can have, and the timestamp clamping that needs to be performed in
theory to account for the fact that a packet might contain a frame that
is always clipped off by segment handling. This can be fixed later.
Needed for a failed thing, leaving it anyway because it causes no harm
and might be less awkward if struct virtual_stream is possibly extended
anyway in the future.
This commit allows to use the AV_PIX_FMT_DRM_PRIME newly introduced
format in ffmpeg that allows decoders to provide an AVDRMFrameDescriptor
struct.
That struct holds dmabuf fds and information allowing zerocopy rendering
using KMS / DRM Atomic.
This has been tested on RockChip ROCK64 device.
Although seeking past the cached range will trigger a low level seek, a
seek into the region between cache end and last video key frame would
simply seek to the video key frame. This meant that you could get
"stuck" at the end of the file instead of terminating playback when
trying to seek past the end.
One change is that we fix this by _actually_ allowing SEEK_FORWARD to
seek past the last video keyframe in find_seek_target().
In that case, or otherwise seeking to cache buffer end, it could happen
that we set ds->reader_head=NULL if the seek target is after the current
packet. We allow this, because the end of the cached region is defined
by the existence of "any" packet, not necessarily a key frame. Seeking
there still makes sense, because we know that there is going to be more
packets (or EOF) that satisfy the seek target.
The problem is that just resuming demuxing with reader_head==NULL will
simply return any packets that come its way, even non-keyframe ones.
Some decoders will produce ugly soup in this case. (In practice, this
was not a problem, because seeking at the end of the cached region was
rare before this commit, and also some decoders like h264 will skip
broken frames by default anyway.)
So the other change of this commit is to enable key frame skipping.
As a nasty implementation detail, we use a separate flag, instead of
setting reader_head to the first key frame encounted (reader_head being
NULL can happen after a normal seek or on playback start, and then we
want to mirror the underlying demuxer behavior, for better or worse).
This change is relatively untested, so you get to keep the pieces for
yourself.
Seems like most code dealing with this was for setting it in redundant
cases. Now SEEK_BACKWARD is redundant, and SEEK_FORWARD is the odd one
out.
Also fix that SEEK_FORWARD was not correctly unset in try_seek_cache().
In demux_mkv_seek(), make the arbitrary decision that a video stream is
not required for the subtitle prefetch logic to be active. We might want
subtitles with long duration even with audio only playback, or if the
file is used as external subtitle.
If a packet uses segmentation, the codec field must be set. Copying the
codec field was forgotten as an oversight, which is why this just
crashes. This showed up only now, because demux_copy_packet() was not
used before in the main demux path until recently.
Fixes#5027.
Since we divide by it in a couple of places and compositors can be crazy,
its better to be safe than sorry.
Also checks cursor spawn durinig init (pointless since it does again on
cursor entry but its more correct).
It seems the cursor hadn't had its position properly adjusted when scaled.
Hence, bring back correct buffer scaling to make the cursor look fine.
Also the cursor surface now gets created sooner so that's better.
This improves upon the previous commit, and partially rewrites it (and
other code). It does:
- disable the seeking within cache by default, and add an option to
control it
- mess with the buffer estimation reporting code, which will most likely
lead to funny regressions even if the new features are not enabled
- add a back buffer to the packet cache
- enhance the seek code so you can seek into the back buffer
- unnecessarily change a bunch of other stuff for no reason
- fuck up everything and vomit ponies and rainbows
This should actually be pretty usable. One thing we should add are some
properties to report the proper buffer state. Then the OSC could show a
nice buffer range. Also configuration of the buffers could be made
simpler. Once this has been tested enough, it can be enabled by default,
and might replace the stream cache's byte ringbuffer.
In addition it may or may not be possible to keep other buffer ranges
when seeking outside of the current range, but that would be much more
complex.
More the ignore_eof field to the internal demux_stream struct. This is
relatively messy, because the internal struct exists only once the
stream is created, and after that setting the ignore_eof flag is a race
condition. We could bother with adding demux_add_sh_stream() parameters
for this, but let's not. So in theory a tiny race condition is
introduced, which can never be triggered since all demux API functions
are called by the playback thread only anyway.
Fix that ts_offset is accessed without log (this was introduced much
earlier by myself).
Introduce an alternative way of avoiding the annoying EOF reached
messages by not resetting the EOF flags for CC streams when a CC packet
is added. This makes the second commit in the PR which added the
original fix unnecessary.
As another cosmetic change merge the check in cached_demux_control()
into a single if().
In the future, the CC pseudo-stream should probably be replaced with an
entire pseudo-demuxer or such, which would avoid some of the messiness
(or maybe not, we don't know yet).
In the extreme case, reading 1 byte would wake up the cache to make the
cache thread read 1 byte. This would be extremely inefficient. This will
not normally happen in our cache implementation, but it's still present
to some lesser degree. Normally you'd set a predefined "cache too low"
boundary, after which you would restart reading. For some reason
something like this is already present using a hardcoded value
(FILL_LIMIT - I don't even know the deeper reason why this exists). So
use that to reduce wakeups.
This doesn't fix redundant wakeups on EOFs, which is especially visible
should something keep retrying reading on EOF (like in an endless loop).
Regression since ec6e8a31e0. Removal of the explicit else case
always applies the conversion to premultiplied alpha in the else branch.
We want to scale with multiplied alpha, but we don't want to multiply
with alpha again on top of it.
Fixes#4983, hopefully.
This should be functionally identical to rgba16f, since the formats only
differ in their representation on the CPU, but it could be useful for RA
backends that don't expose rgba16f, like Vulkan. It's definitely useful
for the WIP D3D11 backend.
With video paused, changing the brightness controls (or similar) would
sometimes not rerender the video frame. So the OSD would redraw, but the
video wouldn't change. This is caused by output caching, and a redraw
request is free to return the cached frame. Change it such to invalidate
the cached frame if any of the options or the equalizer change.
In theory, gl_video_reset_surfaces() could be called if the equalizer
changes - this would apparently force interpolatzion to redraw all
frames. But this looks kind of crappy when changing the equalizer during
playback. It'll "eventually" use the correct settings anyway, and when
paused interpolation is off.
This was phased out, and was used only by vdpau by now. Drop the
mechanism and the vdpau special code, which means screenshots won't
include the vf_vdpaupp processing anymore. (I don't care enough about
vdpau, it's on its way out.)
The mechanism introduced in b135af6842 assumed AVHWFramesContext would
be enough. Apparently it's not - the intended use with Rockchip (not
Rokchip btw.) requires accessing actual frame data in order to access
the AVDRMFrameDescriptor struct.
Just pass the entire mp_image to the new function. This is more
flexible, although it slightly worries me that it will be less reusable
for things which require setting up mp_image_params before any real
frames are processed (such as filters).
The same should happen with any other side data that matters to mpv,
otherwise filters will drop it.
(No, don't try to argue that mpv should use AVFrame. That won't work.)
ffmpeg_garbage() is copy&paste from frame_new_side_data() in FFmpeg
(roughly feed201849b8f91), because it's not public API. The name
reflects my opinion about FFmpeg's API.
In mp_image_to_av_frame(), change the too-fragile
*new_ref = (struct mp_image){0};
into explicitly zeroing out the fields that are "transferred" to the
created AVFrame.
Merge mp_image_copy_fields_to_av_frame() into mp_image_from_av_frame(),
same for the other direction.
There isn't any good reason to keep them separate, and the refcounting
handling makes it only more awkward.
It seems this will be useful for Rokchip DRM hwcontext integration.
DRM hwcontexts have additional internal structure which can be different
depending on the decoder, and which is not part of the generic hwcontext
API. Rockchip has 1 layer, which EGL interop happens to translate to a
RGB texture, while VAAPI (mapped as DRM hwcontext) will use multiple
layers. Both will use sw_format=nv12, and thus are indistinguishable on
the mp_image_params level. But this is needed to initialize the EGL
mapping and the vo_gpu video renderer correctly.
We hope that the layer count is enough to tell whether EGL will
translate the data to a RGB texture (vs. 2 texture resembling raw nv12
data). For that we introduce MP_IMAGE_HW_FLAG_OPAQUE.
This commit adds the flag, infrastructure to set it, and an "example"
for D3D11.
The D3D11 addition is quite useless at this point. But later we want to
get rid of d3d11_update_image_attribs() anyway, while we still need a
way to force d3d11vpp filter insertion, so maybe it has some
justification (who knows). In any case it makes testing this easier.
Obviously it also adds some basic support for triggering the opaque
format for decoding, which will use a driver-specific format, but which
is not supported in shaders. The opaque flag is not used to determine
whether d3d11vpp needs to be inserted, though.
Mostly an obscure option for testing. But --videotoolbox-format can be
deprecated, as it becomes redundant.
We rely on the libavutil hwcontext implementation to reject invalid
pixfmts, or not to blow up if they are incompatible.
This was confusing at best. Change it to output the actual choices.
(Seems like in the end it's always me who has to clean up other people's
bullshit.)
Context names were not unique - but they should be, so fix it. The whole
point of the original --opengl-backend option was to side-step the
tricky auto-detection, so you know exactly what you get. The goal of
this commit is to make --gpu-context work the same way. Fix the
non-unique names by appending "vk" to the names.
Keep in mind that this was not suitable for slecting the "UI" backend
anyway, since "x11" would force GLX, whereas people on not-NVIDIA
actually want "x11egl". Users trying to use --gpu-context=x11 to force
the X11 backend would always end up with GLX, which would at least break
VAAPI hardware decoding for them. Basically the idea that this option
could select the "UI" type is completely broken - it selects an
implementation, which implies a UI. Selecting the UI type This would
require a separate mechanism. (Although in theory this separate
mechanism could be part of the --gpu-context option - in any case,
someone would have to implement it.)
To achieve help output that can actually be understood, just duplicate
the code. Most of that code is duplicated anyway, and trying to share
just the list code with the result of making the output unreadable
doesn't make too much sense. If we wanted to save code/effort, we could
just remove the help output altogether.
--gpu-api has non-unique entries, and it would be nice to group them
(e.g. list all OpenGL capable contexts with "opengl"), but C makes this
simple idea too much of a pain, so don't do it.
Also remove a stray tab from the android entry on the manpage.
If the chroma location is missing, vo_gpu will use centered chroma.
Select a better chroma location by default: normally, it will always be
MPEG video chroma location. If full levels are used, use JPEG chroma
location, because that sort of sounds like it could make sense as it
might coincide with JPEG being decoded.
See e.g. #4804.
Unfortunately I'm also adding the full text of the LGPL license text,
because the GPL one was already present in this repository, and I don't
want to imply that the GPL somehow has priority.
Every compositor (including toy compositors) has had support for wl_output v2
since forever, so there's little point in supporting degraded output for 5 year
old releases (especially considering we require zxdg6 which is far more recent).
This adds symbol information to the generated SPIR-V, which shows up in
the SPIR-V assembly dump. It's also useful for potential RA backends
that use SPIRV-Cross, since the symbol information is used in the
generated shader source.
Rename --enable-preliminary-lgpl2 to --enable-gpl. This concludes the
relicensing. Some things are still to do (relicensing some still-GPL
optional code), but we consider the code included by --enable-gpl to be
fully relicensed.
The relicensing was performed by asking every known author for
permission for relicensing it to LGPL version 2.1 "or later". If an
author could not be contacted or permission could not be obtained, and
the contribution was considered relevant for copyright purposes, the
affected code was either excluded from LGPL mode (not built), or removed
or rewritten. This is the standard in open source relicensing processes.
Keep in mind that using LGPL mode is still on the user's own risk. Even
though I claim that the relicensing was pretty clean and thorough
(measured on the standards of the open source community¹), and I
followed the advice of some actual experts, there is still a residual
uncertainty due to the fact that I'm not an all-knowing entity (authors
could have taken someone else's code and pretend it's their own) nor a
lawyer (meaning I might lack associated authority or expertise), and the
fact that the judicial system is far from deterministic. The relicensing
was performed merely to the best of my knowledge. I reject all
responsibility outside of that.
This commit also cleans up the "Copyright" file to reflect the finalized
relicensing process.
¹ Not to imply that the standards of commercial companies are much
higher. Some major tech companies get away with stuff I would not
consider clean.
See #2033.
This should actually cover all of them, if you take into account that
some unchanged GPL source files include header files with such checks.
Also this was done already for the libaf derived code.
This is only for "safety" and to avoid misunderstandings.
It turns out compositors which do scaling scale the cursor as well,
so every single surface needs to get scaled too.
Also, 32 corresponds to the default size for both GTK+ and KDE.
This new interface in libva2 offers a cleaner way to export surfaces
which can then be imported to EGL. In particular, this works with
the Mesa driver, so we can have proper playback without a pointless
download and upload on AMD cards.
This change does nothing with libva1, and will fall back to the
libva1 interface (vaDeriveImage() + vaAcquireBufferHandle()) if
vaExportSurfaceHandle() is not present.
Signed-off-by: wm4 <wm4@nowhere>
Rename --stats to --load-stats-overlay and add an entry to options.rst
over the original commit.
Signed-off-by: wm4 <wm4@nowhere>
Previously multiple timers were used to realize oneshot, toggling
(redrawing) and page keybindings. The oneshot case in particular also
relied on mp.osd_message to display text only for a given duration.
This was changed to only use one timer in total now. Because now each
case has a defined "start" and "end" point (including oneshot)
mp.set_osd_ass() can be used to print stats as well. This is currently
optional and has to be activated using the config option
persistent_overlay=true.
One shortcoming: oneshot and toggling are mutual exclusive right now.
Previously you could enter toggling while oneshot stats were shown,
this is not possible anymore to reduce the number of cases to be
considered. This can be added later on if desired.
It used a bad heuristic that got even worse/less reliable with recent
changes in mpv. In fact, it's not reliable at all.
Watch out for dropped frames instead. That's a useful indicator.
Previously I could trigger a bug with intense button mashing, however,
was unable to reproduce it and therefore debug it.
This change now seems to be resilient against button mashing, let's hope
it really is.
Please note that the latest version of this script needs a very recent
version of mpv (from yesterday, to be precise, see the readme).
For older versions, please go to "releases".
HOW IT WORKS:
While the stats are visible (i.e. text is printed to the OSD) a
subsequent click on a numeric key (1, 2, ...) will display the
corresponding "page".
This works no matter if the stats are toggled or just shown as a single
invocation. In case of a single invocation, the newly displayed page
will be shown for the full duration again.
The selected page will be remembered (not persistantly though).
So far, only 3 pages are available.
1: the default page, stats as they used to be
2: extensive VO performance stats (to be redesigned/changed soon)
3: dummy
In the future, many more pages are possible.
Implementation is likely to change again (functionality will stay
the same). A new timer had to be introduced to remove the forced
keybindings in the oneshot case. The toggle case can remove them without
a timer. Ensuring that each mode won't remove timers of the other mode
didn't really turn out neat.
Therefore, I intend to change this again, maybe by merging the
oneshot case into the toggle case.
Due to the large amount of per-pass data, the function takes a parameter
indicating whether or not to print a simplified view instead.
The overall intent is to print the simplified view for now, but supposed
printing the full view on a dedicated "tab" (or extra view type), and as
such, `o.print_perfdata_passes` will go away again. I've only introduced
it for now so users can play around with this functionality if they want
to, until Argon- gets around to implementing stats "tabs".
Previously, we used a property and when it was unavailable we assumed it
doesn't exist before assuming it really is just unavailable. This lead
to unnecessarily falling back to deprecated properties which made mpv
print deprecation warnings.
Now we can really check if a property is not known to mpv.
The alternative would've been to check the error part of mp.get_property
and perform string comparisons on the returned error message.
Not sure if supporting old mpv versions is actually worth it though.
Fixes#37#36
Both come with graphs enabled by default.
They can be disabled using the options plot_vsync_ratio and
plot_vsync_jitter (see the readme regarding customization).
In case both graphs are deactivated the ratio and jitter properties will
be printed on the same line to save some space.
One more user-visible/noticeable change: the maximum used to scale the
values for each graph is no longer calculated each time the stats are
shown but instead when collecting the data. This means the maximum
can actually be higher than all values currently present in a graph's
data buffer. This makes it easier to judge a graph's values, especially
since as we have no axis labels.
To prevent high values staying max forever graph data buffers are
cleared when toggling (can be disabled). It was never useful to
keep old data and simply append newer data (with a time skip) anyway.
This used to be the case, I'm not sure when it changed.
The current way of 'hiding' it in case of 0 is not exactly
good and relies on the OSD representation. It could be done
better by querying the video-sync-active property but that would
require querying yet one more thing...
Added to mpv in commit a14f9249. Simply shown after the gamma curve if
available, since it's semantically attached to it.
Also regroup some of the colorimetry options to make this fit (and for
them to make more sense)
Display an additional line with the sum of all three timing values.
Disabled by default.
I didn't see the necessity to also create a graph for this line
Add a yellow highlight to the existing red highlight.
Red is still used once the available time is exhausted, yellow is
supposed to be a warning when the headroom is getting small.
The threshold is configurable.
Graphs are now aligned. This required a change in the layout of
performance data. Reason is a wrong (but intended) calculation
of vector drawing sizes in libass to maintain compatibility.
This essentially prevents text following the graph.
To achieve alignment only monospaced text can precede the graph.
This led to the layout changing slightly when graphs are shown.
Instead of creating new strings with the content of the previous
one followed by some new content we now write all content into
tables that are concatenated in the end.
This is unlikely to improve performance but at least it will
cut down on all these temporary, growing strings polluting memory.
Major changes:
- graphs are only drawn when in toggled mode
- performance data is retrieved every ith frame (default: 5)
- highlighting of performance data (numbers): add a highlight
when the summed numbers (last/avg/peak) exceed 1/display-fps
Display various performance data about frames and their
display/rendering. Additionally plot graphs for this data.
This is experimental and pretty much just a test at this point and by
far not final.
Previously the delay was slightly shortened but a user explicitly
setting a specific delay most likely expects the stats to refresh
in exactly the frequency he desired.
You can now either show the stats once or toggle their display. Both are
using different key bindings which are additionally configurable now.
Please bear in mind that "toggling" means "redraw every x seconds for x
seconds". Therefore, this approach is prone to problems especially when
something else is printing text to the OSD as well as every of these
calls will overwrite each other. This is currently a limitation of mpv.
Fixes#18
This simply prints ASCII codes to display any text marked as bold in the
terminal. Supported by every sane terminal since 1986. For those insane,
there's a check. The check has been copied from the ansicolors.lua
script floating around and it checks if the directory path uses "\"
instead of "/", and in case it does, it checks whether ANSICON env
variable has been set (which is used to indicate the Windows terminal
supports ACII escape sequences).
Unify both append_property* functions and greatly refactor them.
Instead of thousands of arguments we now use a table.
While this is in theory cleaner it does not exactly look like it.
However, it's way more flexible and extendable this way.
Also, since the new append_property() might look a bit confusing
I felt the need to add a comment.
Previously, the script would throw garbage (ASS tags) at the terminal
when the bound key was pressed. This changes the behaviour to _not_
print any ASS tags (and replace those which can be interpreted by the
terminal) if there's no video.
I cleaned the patch up since you mentioned you were busy. As I said
before, there is absolutely no problem with calling mpv to display
strings to the OSD without any video. They'll just go straight to the
terminal just as they would with an active VO.
ATSC is a mix of terrestrial and cable,
and depending on modulation is actually using
DVBC_ANNEX_B. Thus, we need to override the delivery
system depending on the modulation, channel by channel.
Signed-off-by: Oliver Freyermuth <o.freyermuth@googlemail.com>
These values are kept with a different unit in VDR style config
for all delivery systems, not only for DVB-S / DVB-S2.
Signed-off-by: Oliver Freyermuth <o.freyermuth@googlemail.com>
Dump the complete raw tuning commands to allow for debugging
on low level.
Also, remove code duplication and some variable shadowing.
Signed-off-by: Oliver Freyermuth <o.freyermuth@googlemail.com>
Also, in case tuning fails with timeout even though the ioctl
was accepted by the device, fall back to DVBv3 tuning.
This may go wrong for multi-delivery-system cards,
so issue an error message in that case.
Signed-off-by: Oliver Freyermuth <o.freyermuth@googlemail.com>
At the moment, rendering on Android requires ``--vo=opengl-cb`` and
a lot of java<->c++ bridging code to receive the receive and react to
the render callback in java. Performance also suffers with opengl-cb,
due to the overhead of context switching in JNI.
With this patch, Android can render using ``--vo=gpu --gpu-context=android``
(after setting ``--wid`` to point to an android.view.Surface on-screen).
MediaCodec uses a fixed number of output buffers to hold frames, and
expects that output buffers will be released as soon as possible. Once
rendered, the underlying frame is automatically released and cannot be
reused or rerendered.
The new VO_CAP_NOREDRAW forces mpv to release frames immediately after
they are rendered or dropped, to ensure that MediaCodec decoder does not
run out of buffers and stall out.
This partiular format is not marked as AV_PIX_FMT_FLAG_RGB in FFmpeg's
pixdesc table, so mpv assumed it's a YUV format.
This is a regression, since the old code in mp_imgfmt_get_desc() also
treated this format specially to avoid this problem. Another format
which was special-cased in the old code was AV_PIX_FMT_MONOBLACK, so
make an exception for it as well.
Maybe this problem could be avoided by mp_image_params_guess_csp() not
forcing certain colorimetric parameters by the implied colorspace, but
certainly that would cause other problems. At least there are mistagged
files out there that would break. (Do we actually care?)
Fixes#4965.
This commit:
- Implements output tracking (e.g. monitor plug/unplug)
- Creates the surface during registry (no other dependencies)
- Queues the callback immediately after surface creation
- Cleaner and better event handling (functions return directly)
- Better reconfigure handling (resizes reduced to 1 during init)
- Don't unnecessarily resize (if dimensions match)
Apart from that fixes 2 potential memory leaks (mime type and window
title), 2 string ownership issues (output name and make need to be
dup'd), fixes some style issues (switches were indented) and finally
adds messages when disabling/enabling idle inhibition.
The callback setter function was removed in preparation for the commit
which will use the frame event cb because it was unnecessary.
The VO code resets each flag individually, and it doesn't do it for this one.
Also make the prints use the struct names rather than the hardcoded ones,
forgot to add those to the last wayland_common commit.
iive agreed to relicense things that are still in mpv to LGPLv2.1. So
change the licenses of the affected files, and rename the configure
switch for LGPL mode to --enable-preliminary-lgpl2.
(The "preliminary" part will probably be removed from the configure
switch soon as well.)
Also player/main.c hasn't had GPL parts since a few commits ago.
But --msg-level can only raise the log level used for --log-file,
because the original idea with --log-file was that it'd log verbose
messages to disk even if terminal logging is lower than -v or fully
disabled.
Seems absurd to keep this under GPL, since it's only a tiny code
fragment (that would always look the same, no matter if you rewrote it
independently), but now I got proper permission from the original author
anyway.
The wayland code was written more than 4 years ago when wayland wasn't
even at version 1.0. This commit rewrites everything in a more modern way,
switches to using the new xdg v6 shell interface which solves a lot of bugs
and makes mpv tiling-friedly, adds support for drag and drop, adds support
for touchscreens, adds support for KDE's server decorations protocol,
and finally adds support for the new idle-inhibitor protocol.
It does not yet use the frame callback as a main rendering loop driver,
this will happen with a later commit.
with the previous commit we removed the ability of loading the standard
shell environment. this exact behaviour can only be re-added by either
invoking the standard shell in a background process and reading it's
environment vars or by manually reading all the various shell configs.
both ways are kinda dirty and the former was already rejected before.
for now we will just add some commonly used paths, when started from the
bundle, so it can find the binaries used by mpv again. for example the
youtube-dl one for our youtube-dl hook.
Apple slightly changed the App bundle mechanism which broke wrapper
scripts that invoke the actual binary. it caused the bundle to always
open a new instance of mpv instead of reusing the currently running one.
just removing the wrapper script would lead to several regressions, so
it was replaced with a symlink to the bundle binary. detection if mpv
was started from the bundle was replaced by comparing the execution name
of the binary, eg the name of the symlink "mpv-bundle". additionally,
because we load a standard config from the Resources folder of the
bundle again, we prevent that config from being loaded if mpv wasn't
started via the bundle. the psn argument has to be removed manually
again.
the ability of loading your standard shell environment has been removed
with the wrapper. a substitution will be added with another commit. as a
side effect this fixes an issues when zsh was used with common NodeJS
configuration scripts.
Fixes#4926#4866
The existing code in check_ext() avoided false positive due to
sub-strings, but allowed false negatives. Fix this with slightly better
search code, and make it available as function to other source files.
(There are some cases of strstr() still around.)
- Don't recommend libdvdnav, since DVD support isn't compiled by default
anymore.
- Take advantage of the new $MINGW_PACKAGE_PREFIX and $MSYSTEM_PREFIX
variables to make the build commands independent from the mingw-w64
build environment being used.
- Invoke /usr/bin/python3 directly, since I've heard some packages have
started to depend on mingw-w64 versions of Python, but our build
scripts only work with the MSYS2 version.
- Reword the MSYS2 install instructions to try to prevent common errors.
Unless FBOs are unsupported, this works. In particular, it's required to
get ICC profiles working in voluntary dumb mode. So instead of
blanket-disabling it, only disable it in the !have_fbo false case.
We allowed any input format that was generally supported by libva, but
this is probably nonsense, as the actual surface format was always fixed
to nv12. We would have to check whether libva can upload a given pixel
format to a nv12 surface. Or we would have to use a separate frame pool
for input surfaces with the exact sw_format - but then we'd also need to
check whether the vaapi VideoProc supports the surface type.
Hardcode nv12 and yuv420p as input formats, which we know can be
uploaded to nv12 surfaces. In theory we could get a list of supported
upload formats from libavutil, but that also require allocating a dummy
hw frames context just for the query.
Add a comment to the upload code why we can allocate an output surface
for input.
In the long run, we'll probably want to use libavfilter's vaapi
deinterlacer, but for now this would break at least user options.
The current check_va_status() function could probably be argued to be
derived from the original VAAPI's patch check_status() function, thus
GPL-only. While I have my doubts that it applies to an idiom on this
level, it's better to replace it. Similar idea, different expression
equals no copyright association.
An earlier commit message promised this, but it was forgotten.
Changed the reference from --gpu-gamma to --gamma-factor,
and changed the reference from --post-shader to --glsl-shaders,
in order to reflect actual changes to the option names.
Originally mpv vaapi support was based on the MPlayer-vaapi patches.
These were never merged in upstream MPlayer. The license headers
indicated they were GPL-only. Although the actual author agreed to
relicensing, the company employing him to write this code did not, so
the original code is unusable to us.
Fortunately, vaapi support was refactored and rewritten several times,
meaning little code is actually left. The previous commits removed or
moved that to GPL-only code. Namely, vo_vaapi.c remains GPL-only. The
other code went away or became unnecessary mainly because libavcodec
itself gained the ability to manage the hw decoder, and libavutil
provides code to manage vaapi surfaces. We also changed to mainly using
EGL interop, making any of the old rendering code unnecessary.
hwdec_vaglx.c is still GPL. It's possibly relicensable, because much of
it was changed, but I'm not too sure and further investigation would be
required. Also, this has been disabled by default for a while now, so
bothering with this is a waste of time. This commit simply disables it
at compile time as well in LGPL mode.
Done for license reasons. vo_vaapi.c is turned into some kind of
dumpster fire, and we'll remove it as soon as I'm mentally ready for
unkind users to complain about removal of this old POS.
This is for relicensing. Some of this code is loosely based on
vo_vaapi.c from the original MPlayer-vaapi patches. Most of the code has
changed, and only the initialization code and check_status() look
remotely similar. The initialization code is changed to be like Libav's
(hwcontext_vaapi.c). check_va_status() is just a C idiom, but to play it
safe, we'll either drop it from LGPL code (or recreate it).
vaapi.c still contains plenty of code from the original patches, but the
next commits will move them out of the LGPL code paths.
Seems to be fixed upstream in the nvidia driver, so it's probably a good
idea to 1. force the layout and 2. remove the warning, as it now
actually works. Users with older drivers would run into errors, but they
can still use shaderc as a replacement. (And it's not like the old
status quo was any better)
This was always set to the length of the VAO, but it should have been
set to the number of vertex attribs actually in use for this frame. No
idea how that managed to survive the test framework on nvidia/linux, but
ANGLE caught it.
This has several advantages:
1. no more redundant texcoords when we don't need them
2. no more arbitrary limit on how many textures we can bind
3. (that extends to user shaders as well)
4. no more arbitrary limits on tscale radius
To realize this, the VAO was moved from a hacky stateful approach
(gl_sc_set_vertex_attribs) - which always bothered me since it was
required for compute shaders as well even though they ignored it - to be
a proper parameter of gl_sc_dispatch_draw, and internally plumbed into
gl_sc_generate, which will make a (properly mangled) deep copy into
params.vertex_attribs.
Apparently this filter is broken in a weird way, which even makes some
libavfilter functions segfault in certain conditions. Don't waste time
with it and just remove the examples.
Also adjust the "life" example description (certainly this filter is
100% worthless, but the example does demonstrate how to use source
filters without any available input).
The case at hand was 5.1 -> fl-fr-fc-lfe-na-na (apparently triggered by
ALSA). That means only the NA channels have to be cleared, but the
result was actually that fc and lfe were cleared. This is due to a
simple regression in the reorder code, which quite obviously got the
index of the first NA channel wrong.
FlagBits is just the name of the enum. The actual data type representing
a combination of these flags follows the *Flags convention. (The
relevant difference is that the latter is defined to be uint32_t instead
of left implicit)
For consistency, use *Flags everywhere instead of randomly switching
between *Flags and *FlagBits.
Also fix a wrong type name on `stageFlags`, pointed out by @atomnuker
Using renderpass layout transitions is more optimal and doesn't require
a redundant pipeline barrier.
Since our render passes are static and don't change throughout the
lifetime of a ra_renderpass, we unfortunately don't have much
flexibility here - so just hard-code SHADER_READ_ONLY_OPTIMAL as the
output format as this will be the most common case.
We also can't short-circuit the transition when we need to preserve the
framebuffer contents, since that depends on the current layout; so we
still use an explicit tex_barrier in this case. (Most optimal for this
scenario would be an input attachment anyway)
auto-copy selects more modes than the ones listed. It will always be
outdated anyway.
The GLX vaapi backend is never selected anymore, because it sucks.
Now you need FFmpeg git, or something.
This also gets rid of the last real use of gpu_memcpy(). libavutil does
that itself. (vaapi.c still used it, but it was essentially unused,
because the code path isn't really in use anymore. It wasn't even
included due to the d3d-hwaccel dependency in wscript.)
This is apparently required to get storage images working on
windows/vulkan, and probably good practice either way. Not entirely sure
if it's the best idea to be always storing the value as 32-bit float,
but it should hardly matter in practice (since we're only writing one
sample per thread).
(Leaving them implicit requires the shaderStorageImageWriteWithoutFormat
feature to be enabled, which the windows nvidia vulkan driver doesn't
support, at least not for a GTX 670)
This makes the radeon driver shut up about frequently updating
STATIC_DRAW UBOs (--opengl-debug), and also reduces the amount of
synchronization necessary for vulkan uniform buffers.
Also add some extra debugging/tracing code paths. I went with a
flags-based approach in case we ever want to extend this.
In addition to the built-in nvidia compiler, we now also support a
backend based on libshaderc. shaderc is sort of like glslang except it
has a C API and is available as a dynamic library.
The generated SPIR-V is now cached alongside the VkPipeline in the
cached_program. We use a special cache header to ensure validity of this
cache before passing it blindly to the vulkan implementation, since
passing invalid SPIR-V can cause all sorts of nasty things. It's also
designed to self-invalidate if the compiler gets better, by offering a
catch-all `int compiler_version` that implementations can use as a cache
invalidation marker.
This time based on ra/vo_gpu. 2017 is the year of the vulkan desktop!
Current problems / limitations / improvement opportunities:
1. The swapchain/flipping code violates the vulkan spec, by assuming
that the presentation queue will be bounded (in cases where rendering
is significantly faster than vsync). But apparently, there's simply
no better way to do this right now, to the point where even the
stupid cube.c examples from LunarG etc. do it wrong.
(cf. https://github.com/KhronosGroup/Vulkan-Docs/issues/370)
2. The memory allocator could be improved. (This is a universal
constant)
3. Could explore using push descriptors instead of descriptor sets,
especially since we expect to switch descriptors semi-often for some
passes (like interpolation). Probably won't make a difference, but
the synchronization overhead might be a factor. Who knows.
4. Parallelism across frames / async transfer is not well-defined, we
either need to use a better semaphore / command buffer strategy or a
resource pooling layer to safely handle cross-frame parallelism.
(That said, I gave resource pooling a try and was not happy with the
result at all - so I'm still exploring the semaphore strategy)
5. We aggressively use pipeline barriers where events would offer a much
more fine-grained synchronization mechanism. As a result of this, we
might be suffering from GPU bubbles due to too-short dependencies on
objects. (That said, I'm also exploring the use of semaphores as a an
ordering tactic which would allow cross-frame time slicing in theory)
Some minor changes to the vo_gpu and infrastructure, but nothing
consequential.
NOTE: For safety, all use of asynchronous commands / multiple command
pools is currently disabled completely. There are some left-over relics
of this in the code (e.g. the distinction between dev_poll and
pool_poll), but that is kept in place mostly because this will be
re-extended in the future (vulkan rev 2).
The queue count is also currently capped to 1, because of the lack of
cross-frame semaphores means we need the implicit synchronization from
the same-queue semantics to guarantee a correct result.
Under some conditions, hide_osc() was calling render(), which then called
hide_osc() again, and so forth, until the stack overflows.
Tracking the exact conditions where this happens (and then managing them
to prevent it) is an excercise in futility.
Remove the osc directly - instead of going through the entire rendering
procedure just to end up rendering nothing.
Fixes#4900 .
Also implicitly fixes memory leak when mp.set_property_native was used,
because the cleanup did not expect more allocations from the accidental
use of mpv_get_property.
Tested by making the ra_tex_resize function always fail (apart from the
initial FBO check). This required a few changes:
1. reset shaders on failed dispatch
2. reset cleanup binds on failed dispatch
3. fall back to initializing the struct image to 1x1 on failure
4. handle output_fbo_valid gracefully
This was sort of grating by default and made it really hard to actually
read e.g. text on top of a transparent background. I decided to approach
the problem from both directions, making the whites darker and the grays
lighter. This brings it closer to the dynamic range of e.g. the
wikipedia transparent svg preview.
Due to the plethora of historical baggage from different eras getting
confusing, I decided to simplify and unify the struct organization and
naming scheme.
Structs that got renamed:
1. fbodst -> ra_fbo (and moved to gpu/context.h)
2. fbotex -> removed (redundant after 2af2fa7a)
3. fbosurface -> surface
4. img_tex -> image
In addition to these structs being renamed, all of the names have been
made consistent. The new scheme is as follows:
struct image img;
struct ra_tex *tex;
struct ra_fbo fbo;
This also affects derived names, e.g. indirect_fbo -> indirect_tex.
Notably also, finish_pass_fbo -> finish_pass_tex and finish_pass_direct
-> finish_pass_fbo.
The new equivalent of fbotex_change() is called ra_tex_resize().
This commit (should) contain no logic changes, just renaming a bunch of
crap.
I've observed the garbage pixels in more scenarios. They also were never
really needed to begin with, originally being a discovered work-around
for bug that we fixed since then anyway. Doesn't really seem to even
help resizing, since the OpenGL drivers are all smart enough to pool
resources internally anyway.
Fixes#1814
Enabling double buffering fixed some graphical glitches when entering
fullscreen, but it also caused a fullscreen performance regression. We
decided that the glitches were preferable to the performance regression.
This reverts commit cee764849e.
The code used ra_ctx_destroy even though ra_ctx_create was never called
(since it's just a dummy ctx), which led to a conflict of assumptions.
The proper fix is to only use ra_gl_ctx_uninit (mirroring the
ra_gl_ctx_init) and free the dummy ctx manually.
Fixes https://github.com/cmdrkotori/mpc-qt/issues/129
We want e.g. --opengl-shaders-append=foo to resolve to the new option,
all while printing an option name. --opengl-shader is a similar case.
These options are special, because they apply "actions" on actual
options by specifying a suffix. So the alias/deprecation handling has to
be part of resolving the actual option from prefix and suffix.
Turns out the option code apparently tries to directly talloc_free() the
allocated strings, instead of going through a tactx wrapper or
something. So we can't directly overwrite it. Do something else
instead..
Almost as fast as the old code, but more general. Notably, glslang
doesn't support nested arrays.
(cf. https://github.com/KhronosGroup/glslang/issues/1057)
Also much cleaner code-wise, so I think I'll keep it even if glslang
implements array_of_arrays.
This never really made sense since the BT.1886 changes. It should get
*brighter* for bright rooms, not darker for dark rooms. Picked some new
values that seemed reasonable-ish.
This causes a performance regression on 10.11 and newer, but the single
buffered method was broken and could cause partially rendered frames to
be presented to the screen.
This reverts 9f30cd8292 and
e543853a7f.
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
Let's blame FFmpeg for just overwriting the samplerate in
av_frame_copy_props(). Can't fully hide my own brain damage though,
since mp_aframe_config_copy() expected that the rate is copied (that
function also copies format and channel layout).
See "Copyright" file for caveats.
This changes the remaining "almost LGPL" files to LGPL, because we think
that the conditions the author set for these was finally fulfilled.
This code could not be relicensed. The intention was to write new filter
code (which could handle both audio and video), but that's a bit of
work. Write some code that can do audio conversion (resampling,
downmixing, etc.) without the old audio filter chain code in order to
speed up the LGPL relicensing.
If you build with --disable-libaf, nothing in audio/filter/* is compiled
in. It breaks a few features, such as --volume, --af, pitch correction
on speed changes, replaygain.
Most likely this adds some bugs, even if --disable-libaf is not used.
(How the fuck does EOF notification work again anyway?)
Move it from af_lavrresample.c to a new aconverter.c file, which is
independent from the filter chain code. It also doesn't use mp_audio,
and thus has no GPL dependencies.
Preparation for later commits. Not particularly well tested, so have
fun.
Just reimplement it in some way, as mp_audio is GPL-only.
Actually I wanted to get rid of audio_buffer.c completely (and instead
have a list of mp_aframes), but to do so would require rewriting some
more player core audio code. So to get this LGPL relicensing over
quickly, just do some extra work.
This is "wrong", because you might want mp_image_copy_attributes() to
preserve the information that the colorspace parameters are unknown.
This is important for hwdec -copy modes, which call this function before
fix_image_params() and mp_colorspace_merge() are called.
Instead, just wipe the colorspace attributes if the pixel format changes
in an apparently incompatible way. Use mp_image_params_guess_csp() logic
for this and factor that into its own function.
mp_image_set_attributes() attempts to do something similar, so change
that in the same way. Also, mp_image_params_guess_csp() just returned if
the imgfmt was invalid or unset - just remove that part, because it
annoyingly doesn't fit into the new code, and had little reason to exist
to begin with. (Probably.)
I see no reason not to do this. I think the check comes from the time
when mp_image stored the image aspect ratio, instead of the pixel aspect
ratio, where the logic might have made more sense.
It was noticed that -copy hwdec modes typically dropped the
chroma_location field. This happened because the attributes on hw
download are copied with mp_image_copy_attributes(), which tries to copy
these parameters only if src and dst were both YUV (in an attempt to
copy parameters only if it makes sense).
But hardware formats did not have the YUV flag set (anymore?), and code
shouldn't attempt to check the flag in this way anyway. Drop the check,
and always copy the whole color metadata struct. There is a call to
mp_image_params_guess_csp() below, which tries to unset nonsense
metadata if it was copied from a YUV format to RGB. This function would
also do the right thing for hw formats (although for the cited bug only
the software case matters).
Fixes#4804.
This reverts commit 96462040ec.
I guess the autoprobing is still too primitive to handle this well. What
it really should be trying is initializing the wrapper decoder, and if
that doesn't work, try another method. This is complicated by hwaccels
initializing in a delayed way, so there is no easy solution yet.
Probably fixes#4865.
This mechanism uses system() and shouldn't even exist. x11_common.c has
its own solution for the original problem (disabling Linux DE
screensavers without MPlayer/mpv having to link a dbus lib). If that is
not sufficient, you can create a simple Lua script.
Incidentally fixes#4888.
Instead of "deps", "deps_neg", and "deps_any" fields, just have a single
"deps" field, which changes from an array to a string. The string is now
an expression, which can contain the operators &&, ||, !, and allows
grouping with ( ).
It's probably overkill. If it gets a maintenance burden, we can switch
to specifiying the dep expressions as ASTs (or maybe eval()-able Python
expressions), and we could simplify the code that determines the reason
why a dependency is not fulfilled. The latter involves a complicated
conversion of the expression AST to DNF.
The parser is actually pretty simple, and pretty much follows:
https://en.wikipedia.org/wiki/Shunting_yard_algorithm
This fixes >2GiB files with at least API level 21.
See: https://android.googlesource.com/platform/bionic/+/master/docs/32-bit-abi.md
for the gritty details.
* Based on libavformat's things, except we do not care about API
versions or NDKs without unistd.h, which contains all sorts of
things that we utilize.
* Redefines lseek to always point to the 64bit version.
* Redefines fseeko to always point towards an inlined static
implementation that utilizes the 64bit version of lseek underneath.
The first one (line 140) comes from 69650851f8 and is the correct one.
The second one (line 731) comes from 72a8120daa and slipped in with the
revert commit.
Remove the second one.
This overrides the use of GLX_SGI_swap_control, because apparently
GLX_SGI_swap_control doesn't support SwapInterval(0), but the
GLX_MESA_swap_interval does.
Of course, everybody except mesa just accepts SwapInterval(0) even for
GLX_SGI_swap_control, but mesa needs to be the special snowflake here
and reject it, forcing us to load their stupid named extension instead.
Meanwhile khronos has done nothing except spit out GLX_EXT_swap_control
(not to be confused with GL_EXT_swap_control, which is exported by
WGL_EXT_swap_control), that doesn't fix the problem because mesa doesn't
implement it anyway.
What a fucking mess.
Even if the contents are entirely zero. In the current code, these
entries were left uninitialized. (Which always worked for nvidia - but
randomly blew up for AMD)
This is simultaneously generalized into two directions:
1. Support more sc_uniform types (needed for SC_UNIFORM_TYPE_PUSHC)
2. Support more flexible packing (needed for both PUSHC and ra_d3d11)
This is around 512 kB, which is just way too much. Heap-allocate it
instead. Also cut down the max pass count to 64, since 128 was
unrealistically high even for vo_opengl.
Instead of relying on power-of-two buffer sizes and unsigned overflow,
make this code more robust (and also cleaner).
Why can't C get a real modulo operator?
This was there even before the refactor, but the refactor exposed the
bug. I hate C's useless fucking modulo operator so much. I've gotten hit
by this exact bug way too many times.
Since the addition of UBOs, the assumption that the uniform index
corresponds to the pass->params.inputs index is no longer true. Also,
there's no reason it would even need this - since the `input` is also
available directly in sc_uniform.
I have no idea how I've been using this code for as long as I have
without any segfaults until earlier today.
This was needlessly complicated and prone to breakage, because even the
references to the ring buffer could end up getting invalidated and
containing garbage data on e.g. shader cache flush. For much the same
reason why we can't keep around the *timer_pool, we're also forced to
hard-copy the entire sample buffer per pass per frame.
Not a huge deal, though. This is, what, a few kB per frame? We have more
pressing CPU performance concerns anyway.
Also simplified/fixed some other code.
This clearly highlights all out-of-gamut/clipped pixels. (Either too
bright or too saturated)
Has some (documented) caveats. Also make TONE_MAPPING_CLIP stop actually
clamping the value range (it's unnecessary and breaks this feature).
other Apps do the same as mpv and tap into the global event chain.
events that are handled are not being propagated down the event chain.
that can lead to mpv not getting any media key events anymore when they
are held back by other Apps. we will just move mpv back to the top of
the event list when mpv is refocused and is not at the top of the list
any more.
Fixes#4834
Redefining texture1D / texture3D seems to be illegal, they are already
built-in macros or something. So just use tex1D and tex3D instead.
Additionally, GL_KHR_vulkan_glsl requires using explicit vertex
locations and bindings, so make some changes to facilitate this. (It
also requires explicitly setting location=0 for the color attachment
output)
Vulkan compat. rgb16 doesn't exist on hardware anyway, might as well
just generate the 3DLUT against rgba16 as well. We've decided this is
the simplest way to do vulkan compatibility: just make sure we never
actually need 3-component textures.
This is mostly done so we can support using textures with more
components than the scaler LUTs have entries. But while we're at it,
also change the way the weights are packed so that they're always
sequential with no gaps. This allows us to simplify
pass_sample_separated_get_weights as well.
Ever since the mp_aframe change, audio mid-stream format changes crash.
I have no idea why the recent mp_aframe change triggers this. Didn't
look too deeply into it either. It appears to work now, though.
Fixes#4828.
Mouse wheel bindings have always been a cause of user confusion.
Previously, on Wayland and macOS, precise touchpads would generate AXIS
keycodes and notched mouse wheels would generate mouse button keycodes.
On Windows, both types of device would generate AXIS keycodes and on
X11, both types of device would generate mouse button keycodes. This
made it pretty difficult for users to modify their mouse-wheel bindings,
since it differed between platforms and in some cases, between devices.
To make it more confusing, the keycodes used on Windows were changed in
18a45a42d5 without a deprecation period or adequate communication to
users.
This change aims to make mouse wheel binds less confusing. Both the
mouse button and AXIS keycodes are now deprecated aliases of the new
WHEEL keycodes. This will technically break input configs on Wayland and
macOS that assign different commands to precise and non-precise scroll
events, but this is probably uncommon (if anyone does it at all) and I
think it's a fair tradeoff for finally fixing mouse wheel-related
confusion on other platforms.
It seems like the Cocoa backend used to return the same mpv keycodes for
mouse back/forward as it did for scrolling up and down. Fix this by
explicitly mapping all Cocoa button numbers to the right mpv keycodes.
mpv's mouse button numbering is based on X11 button numbering, which
allows for an arbitrary number of buttons and includes mouse wheel input
as buttons 3-6. This button numbering was used throughout the codebase
and exposed in input.conf, and it was difficult to remember which
physical button each number actually referred to and which referred to
the scroll wheel.
In practice, PC mice only have between two and five buttons and one or
two scroll wheel axes, which are more or less in the same location and
have more or less the same function. This allows us to use names to
refer to the buttons instead of numbers, which makes input.conf syntax a
lot easier to remember. It also makes the syntax robust to changes in
mpv's underlying numbering. The old MOUSE_BTNx names are still
understood as deprecated aliases of the named buttons.
This changes both the input.conf syntax and the MP_MOUSE_BTNx symbols in
the codebase, since I think both would benefit from using names over
numbers, especially since some platforms don't use X11 button numbering
and handle different mouse buttons in different windowing system events.
This also makes the names shorter, since otherwise they would be pretty
long, and it removes the high-numbered MOUSE_BTNx_DBL names, since they
weren't used.
Names are the same as used in Qt:
https://doc.qt.io/qt-5/qt.html#MouseButton-enum
If a VO-area option changes, gl_video_resize() is called
unconditionally. This function does something even if the size does not
change (at least it discards buffered frames for interpolation), which
can lead to stutter when you keep firing option change events during
playback.
Check for an actual resize, and if nothing changes, exit early.
Could cause a crash if anything called ra_get_imgfmt_desc(imgfmt=0). Let
it fail correctly. This can happen if a hwdec backend does not set
hw_subfmt correctly.
This also introduces RA_CAP_GLOBAL_UNIFORM. If this is not set, UBOs
*must* be used for non-bindings. Currently the cap is ignored though,
and the shader_cache *always* generates UBO-using code where it can.
Could be made an option in principle.
Only enabled for drivers new enough to support explicit UBO offsets,
just in case...
No change to performance, which is probably what we expect.
This no longer concerns the API user except in as much as the API user
probably wants to know whether or not PBOs are active, so keep around
the CAP field even though it's mostly useless now.
Both vulkan and opengl distinguish between rendering to an image and
using an image as a storage attachment. So make this an explicit
capability instead of lumping it in with render_dst. (That way we could
support, for example, using an image as a storage attachment without
requiring a framebuffer)
The real reason for this change is that you can directly use the output
FBO as a storage attachment on vulkan but you can't on opengl, which
makes this param structly separate from render_dst.
I don't like the feeling of "reusing" the int binding for this. It
feels... wrong, somehow. I'd prefer to use an explicit "offset" field.
(Plus, I might re-use this for uniform buffers or something)
YMMV
98f5579 added a safeguard for the deactivation of the automatic tab bar
but it still needs a compile time guard. add a forward declaration for
the setAllowsAutomaticWindowTabbing method of NSWindow.
Fixes#4783
This is needed for HAVE_SSE4_INTRINSICS. config.h used to be included as
a transitive dependency of vf.h, but the include statement was removed
from vf.h in 8f2ccba71b.
Also silence an unused variable warning that was introduced in the same
commit.
Some people use very wide display modes such as 3840x240 with their CRT
televisions because it lessens scaling artifacts in video game
emulators. When using a 3840x240 display mode on a 4:3 CRT television,
the pixel aspect ratio is 1:12, so in order to watch a video with mpv on
the same television without changing the display mode, the user should
use --monitorpixelaspect=1:12.
Unfortunately, 1:12 (or 0.083) was out of range for the
--monitorpixelaspect option. There was no good reason for this, so
extend the range of the option to 1:32-32:1 (0.03125-32,) which should
be more than enough to support "super-wide" display modes like these.
This is related to #4483, but it doesn't fix the issue (which was to do
with subtitle rendering.)
Commit 03cf150ff3 accidentally dropped these. Readd them in a simpler
way (so only a property_osd_display[] entry is enough). This commit
doesn't actually touch the video equalizer properties, because the
default value of 0 for the marker is what they require anyway.
Not resetting hwdec_request_reinit caused it to flush on every packet,
which not only caused it to fail triggering the actual fallback, and let
it never decode a new frame, but also to get stuck on EOF.
This removes all GPL only code from it, and that's the whole purpose.
Also happens to be much simpler.
The "deinterlace" option still sort of exists, but only as runtime
changeable option. The main change in behavior is that the property will
not report back the actual deint state. Or in other words, if inserting
or initializing the filter fails, the deinterlace property will still
return "yes". This is in line with most recent behavior changes to
properties and options.
I really wouldn't care much about this, but some parts of the core code
are under HAVE_GPL, so there's some need to get rid of it. Simply turn
the video equalizer from its current fine-grained handling with vf/vo
fallbacks into global options. This makes updating them much simpler.
This removes any possibility of applying video equalizers in filters,
which affects vf_scale, and the previously removed vf_eq. Not a big
loss, since the preferred VOs have this builtin.
Remove video equalizer handling from vo_direct3d, vo_sdl, vo_vaapi, and
vo_xv. I'm not going to waste my time on these legacy VOs.
vo.eq_opts_cache exists _only_ to send a VOCTRL_SET_EQUALIZER, which
exists _only_ to trigger a redraw. This seems silly, but for now I feel
like this is less of a pain. The rest of the equalizer using code is
self-updating.
See commit 96b906a51d for how some video equalizer code was GPL only.
Some command line option names and ranges can probably be traced back to
a GPL only committer, but we don't consider these copyrightable.
Both the video equalizer command/option glue, which drives this filter,
as well as the filter itself are slightly GPL contaminated. So it goes.
After this commit, "--vf=eq" will actually use libavfilter's vf_eq (if
FFmpeg was compiled in GPL mode), but it has different options and will
not listen to the equalizer VOCTRLs.
So far, we had a thread-safe way to read options, but no option update
notification mechanism. Everything was funneled though the main thread's
central mp_option_change_callback() function. For example, if the
panscan options were changed, the function called vo_control() with
VOCTRL_SET_PANSCAN to manually notify the VO thread of updates. This
worked, but's pretty inconvenient. Most of these problems come from the
fact that MPlayer was written as a single-threaded program.
This commit works towards a more flexible mechanism. It adds an update
callback to m_config_cache (the thing that is already used for
thread-safe access of global options).
This alone would still be rather inconvenient, at least in context of
VOs. Add another mechanism on top of it that uses mp_dispatch_queue, and
takes care of some annoying synchronization issues. We extend
mp_dispatch_queue itself to make this easier and slightly more
efficient.
As a first application, use this to reimplement certain VO scaling and
renderer options. The update_opts() function translates these to the
"old" VOCTRLs, though.
An annoyingly subtle issue is that m_config_cache's destructor now
releases pending notifications, and must be released before the
associated dispatch queue. Otherwise, it could happen that option
updates during e.g. VO destruction queue or run stale entries, which is
not expected.
Rather untested. The singly-linked list code in dispatch.c is probably
buggy, and I bet some aspects about synchronization are not entirely
sane.
Also refactors the usage of tex_upload to make ra_tex_upload_pbo a
RA-internal thing again.
ra_buf_pool has the main advantage of being dynamically sized depending
on buf_poll, so for OpenGL we'll end up only using one buffer (when not
persistently mapping) - while for vulkan we'll use as many as necessary,
which depends on the swapchain depth anyway.
As pointed out by uau on IRC, the pointer to info is still used outside
of the lock. An extremely small race condition window, but still a race
condition.
The struct m_thread_info pointer is part of an array, that will be
reallocated if another thread is created while the run_thread is just
being called. In previous versions of this code, the pointer was stable
(as long as the thread existed), so this was overlooked.
Fixes#4770. I'm not sure why this triggers it so reliably, while it
remained undetected otherwise.
Completely untested (rsound dev libs unavailable on my system). Trivial
enough that it's very likely that it'll just work. No port selection,
but could be added by parsing it as part of the device name.
Should fix#4714.
This adds handling of spherical video metadata: retrieving it from
demux_lavf and demux_mkv, passing it through filters, and adjusting it
with vf_format. This does not include support for rendering this type of
video.
We don't expect we need/want to support the other projection types like
cube maps, so we don't include that for now. They can be added later as
needed.
Also raise the maximum sizes of stringified image params, since they
can get really long.
This broke screensaver/powersave inhibition with at least KDE and
LXDE. This is a release blocker.
Since fdo, KDE and GNOME idiots seem to be unable to reach
a consensus on a simple protocol, this seems unlikely to get
fixed upstream this year, so revert this change.
Fixes#4752.
Breaks #4706 but I don’t give a damn.
This reverts commit 3f75b3c343.
dst was not supposed to be initialized, the mp_audio_ setters (which
initialize dst's fields) assume it is -> shit happens. Regression from
recent changes. Was probably harmless.
- tex_uploads args are moved to a struct
- the ability to directly upload texture data without going through a
buffer is made explicit
- the concept of buffer updates and buffer polling is made more explicit
and generalized to buf_update as well (not just mapped buffers)
- the ability to call tex_upload/buf_update on a tex/buf is made
explicit during tex/buf creation
- uploading from buffers now uses an explicit offset instead of
implicitly comparing *src against buf->data, because not all buffers
may actually be persistently mapped
- the initial_data = immutable requirement is dropped. (May be re-added
later for D3D11 if that ever becomes a thing)
This change helps the vulkan abstraction immensely and also helps move
common code (like the PBO pooling) out of ra_gl and into the
opengl/utils.c
This also technically has the side-benefit / side-constraint of using
PBOs for OSD texture uploads as well, which actually seems to help
performance on machines where --opengl-pbo is faster than the naive code
path. Because of this, I decided to hook up the OSD code to the
opengl-pbo option as well.
One drawback of this refactor is that the GL_STREAM_COPY hack for
texture uploads "got lost", but I think I'm happy with that going away
anyway since DR almost fully deprecates it, and it's not the "right
thing" anyway - but instead an nvidia-only hack to make this stuff work
somewhat better on NUMA systems with discrete GPUs.
Another change is that due to the way fencing works with ra_buf (we get
one fence per ra_buf per upload) we have to use multiple ra_bufs instead
of offsets into a shared buffer. But for OpenGL this is probably better
anyway. It's possible that in future, we could support having
independent “buffer slices” (each with their own fence/sync object), but
this would be an optimization more than anything. I also think that we
could address the underlying problem (memory closeness) differently by
making the ra_vk memory allocator smart enough to chunk together
allocations under the hood.
Instead of merging it into render_dst. This is better for vulkan,
because blitting in vulkan both does not require a FBO *and* requires a
different image layout.
Also less "hacky" for OpenGL, since now the weird blit=FBO requirement
is an implementation detail of ra_gl
This affects small seeks backwards while within the buffer. Demuxers
usually avoid this, so it's probably not triggered very often. (Although
demux_mkv.c potentially triggers it often, and it uses stream_peek() to
explicitly guarantee that it can use this code to seek back.) The
condition is complex enough to warrant an assertion.
This is pretty pointless, but I believe it allows us to claim that the
new code is not affected by the copyright of the old code. This is
needed, because the original mp_audio struct was written by someone who
has disagreed with LGPL relicensing (it was called af_data at the time,
and was defined in af.h).
The "GPL'ed" struct contents that surive are pretty trivial: just the
data pointer, and some metadata like the format, samplerate, etc. - but
at least in this case, any new code would be extremely similar anyway,
and I'm not really sure whether it's OK to claim different copyright. So
what we do is we just use AVFrame (which of course is LGPL with 100%
certainty), and add some accessors around it to adapt it to mpv
conventions.
Also, this gets rid of some annoying conventions of mp_audio, like the
struct fields that require using an accessor to write to them anyway.
For the most part, this change is only dumb replacements of mp_audio
related functions and fields. One minor actual change is that you can't
allocate the new type on the stack anymore.
Some code still uses mp_audio. All audio filter code will be deleted, so
it makes no sense to convert this code. (Audio filters which are LGPL
and which we keep will have to be ported to a new filter infrastructure
anyway.) player/audio.c uses it because it interacts with the old filter
code. push.c has some complex use of mp_audio and mp_audio_buffer, but
this and pull.c will most likely be rewritten to do something else.
This extracts non-ANGLE specific code to d3d11_helpers.c, which is
modeled after egl_helpers.c. Currently the only consumer is
context_angle.c, but in future this may allow the D3D11 device and
swapchain creation logic to be reused in other backends.
Also includes small improvements to D3D11 device creation. It is now
possible to create feature level 11_1 devices (though ANGLE does not
support these,) and BGRA swapchains, which might be slightly more
efficient than ARGB, since its the same format used by the compositor.
This is for legacy GL: if VAOs are not available, the helper has to
specify vertex attributes again on every rendering. gl_vao_init() keeps
the vertex array for this purpose. Unfortunately, a temporary argument
was passed to the function, instead of the permanent copy.
Also, it didn't use num_entries (instead expected the array being
terminated by a {0} entry). Fix that source code indentation too.
This reverts commit ea40fa36ee.
This caused strange runtime failure on Raspbian (when running mpv,
vc_dispmanx_display_open() returned 0, while other dispmanx using
programs were fine). The problem must have been something about the
compiler flags, maybe linking order or set of include paths.
These are useless and shouldn't be confused with normal RGB formats.
Replace the earlier hack checking the format name with a proper check.
(Not sure when this flag was added. Libav won't have it anyway, but also
no bayer formats.)
Refresh seeks are automatically issued when changing filters, which
improves user experience if these filters change buffering or such.
The refresh seek could actually overwrite a previously ongoing seek:
set pause yes
set time-pos 10
set vf ""
Here, the video code issued a refresh seek to the previous video
position, which could be different from the previously triggered (and
still ongoing) seek, this overwriting the seek.
Factor all refresh seek handling into a new function, and make it handle
ongoing seeks correctly.
Remove the weird new canonical_pts field, which actually had no use.
Fixes#4757.
Commit f1d161d55f accidentally added the handle_force_window() call if
no track is selected.
This was OK, but breaks something like "mpv *", where some files are not
playable (like subtitle files) - the unplayable files would remove and
recreate the VO window, which is annoying.
Just drop the call again.
In commit c6fafbffac we accidentally set the logical texture size to
the cropped video size, which is not correct. This caused rendering
artifacts in some cases.
Use the video surfaces size instead. Since the current mp_image_params
contains the cropped size only, wrapper texture creation has to be moved
to the _map function. Move the same code for the mixer case (strictly
speaking this is not needed, but seems more symmetric).
(Also there is no need to clear gl_textures on uninit - leftover from
the old hwdec mapper API. So we just drop that part.)
Fixes#4760.
This oddly triggers bogus EOF when switching filter graphs between two
audio files (in this case, "[vid1]f[vo];[aid2]f[ao]"->"[aid1]f[ao]",
with aid2 being an external audio source).
This commit also fixes desync when seeking with an external file
connected via --lavfi-complex.
(Yes, the audio resync code is cursed.)
Tends to be somewhat glitchy if subtitles are enabled, and you enable
and disable tracks.
On error, this will disable --lavfi-complex, which will result in
whatever behavior.
This was _always_ called, even if the resampling was static, or the
filter was inserted for format conversion only. This should have been
fine, as I expected the function not to enable resampling when the
compensation is unset, and the source/target rates are the same. But
this is not the case, and it always enables resampling.
So explicitly avoid the call. If we have already called it successfully,
it's better not do avoid it (to overwrite the previous compensation
value), but it will also be cheap/no-op then.
Probably fixes#4716.
Commit 0e0b87b6f3 fixed that dropped packets did not trigger further
work correctly. But it also made trivial --lavfi-complex freeze. The
reason is that the meaning if DATA_AGAIN was overloaded: the decoders
meant that they should be called again, while lavfi.c meant that other
outputs needed to be checked again. Rename the latter meaning to
DATA_STARVE, which means that the current input will deliver no more
data, until "other" work has been done (like reading other outputs, or
feeding input).
The decoders never return DATA_STARVE, because they don't get input from
the player core (instead, they get it from the demuxer directly, which
is why they still can return DATA_WAIT).
Also document the DATA_* semantics in the enum.
Fixes#4746.
Retrieve the depth for each component and internal texture format
separately. Only for 8 bit per component textures we assume that all
bits are used (or else we would in my opinion create too many probe
textures).
Assuming 8 bit components are always correct also fixes operation in
GLES3, where we assumed that each component had -1 bits depth, and this
all UNORM formats were considered unusable. On GLES, the function to
check the real bit depth is not available. Since GLES has no 16 bit
UNORM textures at all, except with the MPGL_CAP_EXT16 extension, just
drop the special condition for it. (Of course GLES still manages to
introduce a funny special case by allowing GL_LUMINANCE , but not
defining GL_TEXTURE_LUMINANCE_SIZE.)
Should fix#4749.
Runtime untested, because I get this:
[vo/rpi] Could not get DISPMANX objects.
This happened even when building older git versions, and on a RPI image
that hasn't changed in the recent years. I don't know how to make this
POS work again, so I guess if there's a bug in the new code, it will
remain broken.
This does two separate rather intrusive things:
1. Make the hwdec context (which does initialization, provides the
device to the decoder, and other basic state) and frame mapping
(getting textures from a mp_image) separate. This is more
flexible, and you could map multiple images at once. It will
help removing some hwdec special-casing from video.c.
2. Switch all hwdec API use to ra. Of course all code is still
GL specific, but in theory it would be possible to support other
backends. The most important change is that the hwdec interop
returns ra objects, instead of anything GL specific. This removes
the last dependency on GL-specific header files from video.c.
I'm mixing these separate changes because both requires essentially
rewriting all the glue code, so better do them at once. For the same
reason, this change isn't done incrementally.
hwdec_ios.m is untested, since I can't test it. Apart from superficial
mistakes, this also requires dealing with Apple's texture format
fuckups: they force you to use GL_LUMINANCE[_ALPHA] instead of GL_RED
and GL_RG. We also need to report the correct format via ra_tex to
the renderer, which is done by find_la_variant(). It's unknown whether
this works correctly.
hwdec_rpi.c as well as vo_rpi.c are still broken. (I need to pull my
RPI out of a dusty pile of devices and cables, so, later.)
Apparently this was broken by the "ctx->hwdec" check in the if condition
guarding the destroy call, and "ctx->hwdec = NULL;" was moved up
earlier, making this always dead code.
This should probably be refcounted or so, although that could make it
worse as well. For now, add a flag whether the device should be
destroyed.
Fixes#4735.
Less flexible than GL_TIMESTAMP but supported by more platforms. This
will mean that nested queries have to be detected and silently omitted,
but oh well. Not much use for them anyway.
Fixes#4721.
This reverts commit 0ce3dce03a.
We actually explicitly add read-only frames in some of the hwaccel code
via mp_image_new_custom_ref(), which sets AV_BUFFER_FLAG_READONLY. It's
probably better to keep it this way.
Fixes#4652 (and some related issues with D3D).
This is really obnoxious. --include parses into the default profile, but
when used on the command line, it did never get applied. So we have to
apply it when the exact conditions for this are met.
Fixes#4673.
If --demuxer-mkv-probe-start-time=no is used, and a seek is triggered on
start, then cluster_start will be 0, and the packet reading code will
print an error message about not finding valid data. This fixes itself
since it invokes the resync code, but it's still pretty ugly. Avoid this
by always initializing cluster_start.
Just the audio resync code in its normal state: buggy. This time,
AD_NO_PROGRESS was handled about the same as AD_WAIT. But it means the
decoder didn't output data, even though input is still readily
available.
This happened in particular when the timeline code was used (potentially
skipping many packets), and thus should fix#4688.
It's an ancient X11 protocol extension that apparently nobody uses
anymore (desktop environments in particular have replaced it with
equally bad protocols that require tons of dependencies). Users keep
complaining about it being a required dependency.
The impact is likely minimal to none.
Fixes#4706 and other annoying people.
Fixes#4626. Previously removed because the original smi entry was added
by someone who did not agree to LGPL relicensing. I'm not sure if the
original change was copyrightable, but this commit for sure does not
fall under that author's copyright.
Any bad HRESULTs should have been printed already and lots of failure modes
don't have an HRESULT leading to awkward hr = E_FAIL business.
This also checks the exit status of GetBufferSize in the align hack. A final
fatal message is added if either of the retry hacks fail.
Generic description of pixel formats is hard. In this case, the Apple
special format for packed YUV could have been interpreted as a RGB
format with funny packing.
Move multiple GL-specific things from the renderer to other places like
vo_opengl.c, vo_opengl_cb.c, and ra_gl.c.
The vp_w/vp_h parameters to gl_video_resize() make no sense anymore, and
are implicitly part of struct fbodst.
Checking the main framebuffer depth is moved to vo_opengl.c. For
vo_opengl_cb.c it always assumes 8. The API user now has to override
this manually. The previous heuristic didn't make much sense anyway.
The only remaining dependency on GL is the hwdec stuff, which is harder
to change.
Completely unnecessary, we can just update the uniforms immediately
after creating the program. In theory, for GLSL 4.20+, we could even
skip this, but oh well.
The vp_w/vp_h variables and parameters were not really used anymore
(they were redundant with ra_tex w/h) - but vp_h was still used to
identify whether rendering should be done mirrored.
Simplify this by adding a fbodst struct (some bad naming), which
contains the render target texture, and some parameters how it should be
rendered to (for now only flipping). It would not be appropriate to make
this a member of ra_tex, so it's a separate struct.
Introduces a weird regression for the first frame rendered after
interpolation is toggled at runtime, but seems to work otherwise. This
is possibly due to the change that blit() now mirrors, instead of just
copying. (This is also why ra_fns.blit is changed.)
Fixes#4719.
When using dumb mode, we can actually redraw a frame without uploading
it. Marking this as fresh as well results in unpredictable pass
behavior, which is confusing and makes debugging harder. So mark it as a
redraw instead, in that case.
Since the GL *gl is no longer needed for the timers, we can get rid of
the sc->gl dependency. This requires moving a utility function (which is
not GL-specific anyway) out of gl_utils.h and into utils.h
In the past, this always measured the per-shader execution times of the
individual OSD parts, which was thrown off because the shader was reused
anyway. (And apparently recording the OSD shader execution times was
removed completely, probably because of them being so unrealiably
anyway)
Since ra_timer no longer has the restriction of not allowing timers to
run concurrently, we can just wrap the entire OSD block inside a single
osd_timer now, and record that. (Technically, this can still be off when
using --blend-subtitles=video/yes and showing a full-screen OSD at the
same time. Maybe this can be done better?)
In order to prevent code duplication and keep the ra abstraction as
small as possible, `ra` only implements the actual timer queries,
it does not do pooling/averaging of the results. This is instead moved
to a ra-neutral struct timer_pool in utils.c.
This code is pretty much for the sake of vo_opengl_cb API users. It
resets certain state that either the user or our code doesn't reset
correctly. This is somewhat outdated. With GL implicit state being
so awfully large, it seems more reasonable require that any code
restores the default state when returning to the caller. Some
exceptions are defined in opengl_cb.h.
Now all GL-specifics of shader compilation are abstracted through ra.
Of course we still have everything hardcoded to GLSL - that isn't going
to change.
Some things will probably change later - in particular, the way we pass
uniforms and textures to the shader. Currently, there is a confusing
mismatch between "primitive" uniforms like floats, and others like
textures.
Also, SSBOs are not abstracted yet.
Instead of having a mutable ra_tex field (and the only one), move the
flag to struct ra, since we have only 2 tex_upload user calls anyway,
and both want the same PBO behavior. (At first I considered making it
a RA_TEX_UPLOAD_ flag, but why bother. PBOs are a terribly GL-specific
thing, so we can't expect a reasonable abstraction of it anyway.)
This requires a silly extension to ra_fns.tex_upload: since the OSD
texture can be much larger than the actual OSD image data to upload, a
mechanism for uploading only to a small part of the texture is needed.
Otherwise, we'd have to realloc/copy the data, just to pad it, and then
pay for uploading the padding too.
The RA_TEX_UPLOAD_DISCARD flag is not interpreted by GL (not sure how
you'd tell GL about this), but it clarifies the API and might be
helpful if we support other backend APIs in the future.
Actually GL-specific parts go into gl_utils.c/h, the shader cache
(gl_sc*) into shader_cache.c/h.
No semantic changes of any kind, except that the VAO helper is made
public again as part of gl_utils.c (all while the goal for gl_utils.c
itself is to be included by GL-specific code).
Another "small" step towards removing GL dependencies from the renderer.
This commit generally passes ra_tex objects instead of GL FBO integer
IDs to various rendering functions. video.c still manually binds the
FBOs when calling shaders.
This also happens to fix a memory leak with output_fbo.
Further work removing GL dependencies from the actual video renderer,
and moving them into ra backends.
Use of glInvalidateFramebuffer() falls away. I'd like to keep this, but
it's better to readd it once shader runs are in ra.
This currently is only limited to Android. Its stdlib contains the
things that mpv's POSIX check checks for, but unfortunately not
glob().
This fixes Android compilation broken in 70a70b9da .
* If we have glob() supported, we have `HAVE_GLOB = 1'.
* If we have specifically POSIX glob(), we have
`HAVE_GLOB_POSIX = 1`.
* If we have specifically Win32 glob(), we have
`HAVE_GLOB_WIN32 = 1`
Additionally change the description to better match what Android is,
which is an "environment". The original positioning of this check
was unfortunate.
This was attempted before in fc9695e63b, but it was reverted in
1b7ce759b1 because it caused conflicts with other software watching
the same keys (See #2041.) It seems like some PCs ship with OEM software
that watches the volume keys without consuming key events and this
causes them to be handled twice, once by mpv and once by the other
software.
In order to prevent conflicts like this, use the WM_APPCOMMAND message
to handle media keys. Returning TRUE from the WM_APPCOMMAND handler
should indicate to the operating system that we consumed the key event
and it should not be propogated to the shell. Also, we now only listen
for keys that are directly related to multimedia playback (eg. the
APPCOMMAND_MEDIA_* keys.) Keys like APPCOMMAND_VOLUME_* are ignored, so
they can be handled by the shell, or by other mixer software.
Updates the line once per second rather than once per frame, saving
quite a bit of CPU. Also completely stops the script while paused.
That aside, fixes the swapped checks for video and audio-only files and
adds bitrate printing.
This currently only works when using lcms-based color management
(--icc-profile-*).
In principle, we could also support using lcms even when the user has
not specified an ICC profile, by generating the profile against a fixed
reference (--target-prim/--target-trc) instead. I still might do that
some day, simply because 3dlut provides a higher quality conversion than
our simple gamut mapping does for stuff like BT.2020, and also because
it's now needed to enable embedded ICC profiles. But that would be a
separate change, so preserve the status quo for now.
(Besides, my opinion is still that you should be using an ICC profile if
you care about colors being accurate _at all_)
Since these need to be refcounted, we throw them directly into struct
mp_image instead of being part of mp_colorspace. Even though they would
semantically make more sense in mp_colorspace, having them there is
really awkward because mp_colorspace is passed around and stored a lot,
and this way their lifetime is exactly tied to the lifetime of the
mp_image associated with it.
mesa won't pick client storage unless this bit is set, and we
*absolutely* want to be using client storage for our DR PBOs.
Performance is shit on AMD otherwise. (Nvidia always uses client storage
for persistent coherent buffers whether you tell it it or not, probably
because it's way faster and nvidia doesn't trust users to figure that
out on their own)
It makes no sense to have this on an already created buffer.
If anything, the ra backend would have to export this as a global value
(e.g. struct ra field), so that whatever allocates the buffer can
account for the required alignment. Since this code is in vo_opengl.c in
the first place, and since GL doesn't dictate any special alignment
here, it doesn't make sense in the first place to export this. (Maybe
something like this will be required later.)
Breaks on mesa for whatever reason... even though it doesn't generate a
GLSL shader compiler error
Shouldn't make a performance difference for us because we cache `pos`
anyway, and most compute shaders will probably cache all of their
samples to shmem. Might have to re-visit this when we have an actual use
case for repeated sampling inside CS though. (RAVU + anti-ringing is a
possible candidate for that)
Or less appropriate, as some would argue. The new name is short for
"Apple YUV packed".
(This format is needed only for hardware decoding on rather old Apple
hardware, and a very annoying special case.)
This broke float textures, which were actually used by some shaders.
There were probably some other bugs as well.
Lots of code can be avoided by using ra_tex_params directly, so do that.
The main change is that COMPONENT/FORMAT are replaced by a single FORMAT
directive, which takes different parameters now. Due to the mess with
16/32 bit float textures, and because we want to support other APIs than
just GL in the future, it's not really clear how this should be handled,
and the nice component/type separation makes things actually harder. So
just jump the gun and use the ra_format.name names, which were
originally meant mostly for debugging. (This is probably something that
will be regretted later.)
Still only superficially tested, but seems to work.
Fixes#4708.
For libav-stable, we download the Libav tarball, which is failing,
because their certificate is broken:
ERROR: cannot verify libav.org's certificate, issued by `/C=US/O=Let\'s Encrypt/CN=Let\'s Encrypt Authority X3':
Issued certificate has expired.
I don't intend to support Libav's overly old releases anymore anyway,
so if you want to use Libav, use its git master.
Since this code was already written for HDR, and is now per-channel
(because it works better for HDR as well), we can actually reuse this to
get very high quality gamut mapping without clipping. The only required
change is to move the tone mapping from before the gamut map to after
the gamut map. Additonally, we need to also account for changes in the
signal range as a result of applying the CMS when we compute ref_peak,
which is fortunately pretty easy because we only need to consider the
case of primaries mapping to themselves.
Since `HDR` no longer really makes sense as a label, rename it to
`--tone-mapping` in general. Also fits better with
`--tone-mapping-desat` etc.
Arguably we could also rename `--hdr-compute-peak`, but that option is
basically only useful for HDR content anyway because we don't need
information about the signal range for gamut mapping.
This (finally!) gives us reasonably high quality gamut mapping even in
the absence of an ICC profile / 3DLUT.
Huge thanks to @rusxg for finding this solution, which was previously
believed not to exist. Of course, we still don't actually need it, but I
don't want to leave this half-implemented in case somebody does in the
future.
different shells need different args to load the expected profiles and
configs, so we added a small heuristic to decide those args. also don't
always load the profiles for a bash login shell and instead only use the
standard shell without any args.
this fixes the mpv binary call in our bundle wrapper script, in the case
that the path to the binary needs escaping. examples are white spaces or
special chars.
So far, switching between integrated and discrete GPU would cause the
kernel to kill mpv due to an indecipherable buffer error. The technical
note TN2229 from Apple recommends to enable OpenGL Offline Renderers for
every Mac with more GPUs than displays to handle the switch between GPU.
By ordering the array from the least commonly rejected to the most,
we can sequentially remove PixelFormat attributes to fit the host.
Fixes#2371
we need to switch the x and y deltas when Shift is being held because
macOS switches them around. otherwise we would get a horizontal scroll
on a vertical one and vice versa.
additional we switch from deltaX/Y to scrollingDeltaX/Y since the Apple
docs suggest it's the preferred way now. in my tests both reported the
same values on imprecise scrolls though.
Also add some more helpers.
Fix the broken math.h include statement.
utils.c uses ra_gl.h internals, which it shouldn't, and which will be
removed again as soon as this code gets converted to ra fully.
The dither texture data is created as a float array, but uploaded to a
texture with GL_R16 as internal format. We relied on GL to do the
conversion from float to uint16_t. Not all GL variants even support
this: GLES does not provide this conversion (one of the reasons why this
code has a float16 code path). Also, ra is not going to do this. So just
convert on the fly.
Still keep the float16 texture format fallback, because not all GLES
implementations provide GL_R16.
There is some possibility that we'll need to provide some kind of upload
conversion anyway for float->float16. We still rely on GL doing this
implicitly, and all GL variants support it, but with RA there might be
the need for explicit conversion. Even then, it might be best to reduce
the number of conversion cases. I'll worry about this later.
Format handling via ra_* was added earlier, but the format negotiation
part was forgotten.
Actually move some aspects of it to ra_get_imgfmt_desc(). Also make sure
the unorm and float formats selected by the common format lookup
functions are linear filterable. (For OpenGL, this is implicitly
guaranteed, so it wasn't done before.) Whether these assumptions should
be checked/enforced in the ra code at all is a bit fuzzy, but with ra
being helper code only for the actual video renderer, it's probably
justified.
The count parameter refers to the number of wide-characters to write to
the buffer (including the terminating NUL character, which is always
added,) not the number of bytes. See C99 7.24.2.3 or
https://msdn.microsoft.com/en-us/library/ybk95axf.aspx
AppVeyor build workers have Git for Windows on the %PATH%, which
includes some MSYS2 binaries. Having multiple MSYS2 installations on the
%PATH% causes cygheap errors, so remove them and make sure %PATH% only
has stuff we need.
Parsing the texture data as raw strings makes the textures the most
portable and self-contained. In order to facilitate different types of
shaders, the parse_user_shader interaction has been changed to instead
have it loop through blocks and call the passed functions for each valid
block parsed. This is more modular and also cleaner, with better code
separation.
Closes#4586.
- Each struct tex_hook now stores multiple hooks, this allows us to
avoid the awkward way of the current code has to add the same pass
multiple times.
- As a consequence, SHADER_MAX_HOOKS was split up into SHADER_MAX_PASSES
(number of tex_hooks) and SHADER_MAX_HOOKS (number of hooked textures
per tex_hook), and both numbers decreased correspondingly.
- Instead of having a weird free() callback, we can just leverage
talloc's recursive free behavior. The only user is the user shaders code
anyway.
This actually makes sure we don't decolor due to clipping even when the
signal itself exceeds the luma by a significant factor, which was pretty
common for saturated blues (and to a lesser degree, reds) - most
noticeable in skies etc.
This prevents the turn-the-sky-cyan effect of mobius tone mapping, and
should also improve the other tone mapping modes in quality.
This starts work on moving OpenGL-specific code out of the general
renderer code, so that we can support other other GPU APIs. This is in
a very early stage and it's only a proof of concept. It's unknown
whether this will succeed or result in other backends.
For now, the GL rendering API ("ra") and its only provider (ra_gl) does
texture creation/upload/destruction only. And it's used for the main
video texture only. All other code is still hardcoded to GL.
There is some duplication with ra_format and gl_format handling. In the
end, only the ra variants will be needed (plus the gl_format table of
course). For now, this is simpler, because for some reason lots of hwdec
code still requires the GL variants, and would have to be updated to
use the ra ones.
Currently, the video.c code accesses private ra_gl fields. In the end,
it should not do that of course, and it would not include ra_gl.h.
Probably adds bugs, but you can keep them.
The radius check was not strict enough, especially not for all
platforms. To fix this, actually check the hardware capabilities instead
of relying on a hard-coded maximum radius.
The textures not having an FBO actually caused regressions when trying
to render the subtitles on top of this texture (--blend-subtitles),
which still relied on an FBO.
So just kill off the logic entirely. Why worry about a single FBO wasted
when we're allocating like 10 anyway.
Fixes#4657.
According to the OpenGL spec, atomic access to SSBO variables is *not*
guaranteed to be coherent, even when reusing the same SSBO attached to
the same shader across different frames. So we actually need a
glMemoryBarrier here, at least in theory.
This bug slipped past my attention because nvidia ignores memory
barriers, but this is not necessarily always the case. Since
image_load_store is incoherent (specifically, writing to images from
compute shaders is incoherent) we need to insert a memory barrier to
make it coherent again. Since we only care about texture fetches, that's
the only barrier we need.
Two changes, compounded into one since they affect the same logic:
1. Never use linearization for HDR downscaling
2. Always use linearization for interpolation
Instead of fixing p->use_linear at the beginning of pass_render_frame,
we flip it on "dynamically" as needed. I plan on killing this
p->use_linear frame (along with other per-pass metadata) and moving them
into their own struct for tracking the "current" state of the video, but
that's a separate/upcoming refactor.
As a small bonus, reduce some code duplication in the interpolation
logic.
Fixes#4631
Mesa 17.1 supports compute shader but not full specs of OpenGL 4.3.
Change the code to detect OpenGL extension "GL_ARB_compute_shader"
rather than OpenGL version 4.3.
HDR peak detection requires SSBO, and polar scaler requires 2D array
extension. Add these extensions as requirement as well.
I've found more test cases where hwdec=cuda shits itself, even
hwdec=cuda-copy. So the whole “copyback is no worse than swdec” is
simply not true. Also, in the light of 10 bit media files and APIs
silently truncating to 8 bit, the warnings need to be generalized a bit.
It's no longer safe to say that “doesn't convert to RGB” means “perfect
playback”.
I've also added a very strong disclaimer to the whole hwdec scenario
clarifying why hwdec is usually a bad idea unless absolutely needed,
because I've seen issue after issue that is resolved by disabling hwdec.
This performs almost 50% faster on my machine (!!), from 4650μs down to
about 3176μs for ewa_lanczossharp.
It's possible we could use a similar approach to speed up the separable
scalers, although with vastly simpler code. For separable scalers we'd
also have the additional huge benefit of only needing padding in one
direction, so we could potentially use a big 256x1 kernel or something
to essentially compute an entire row at once.
This is done via compute shaders. As a consequence, the tone mapping
algorithms had to be rewritten to compute their known constants in GLSL
(ahead of time), instead of doing it once. Didn't affect performance.
Using shmem/SSBO atomics in this way is extremely fast on nvidia, but it
might be slow on other platforms. Needs testing.
Unfortunately, setting up the SSBO still requires OpenGL calls, which
means I can't have it in video_shaders.c, where it belongs. But I'll
defer worrying about that until the backend refactor, since then I'll be
breaking up the video/video_shaders structure anyway.
These can either be invoked as dispatch_compute to do a single
computation, or finish_pass_fbo (after setting compute_size_minimum) to
render to a new texture using a compute shader. To make this stuff all
work transparently, we try really, really hard to make compute shaders
as identical to fragment shaders as possible in their behavior.
Don't use FBOTEX_FUZZY where the FBO is sized according to
p->texture_w/h, since this changes infrequently (and when it does, we
need to reset everything anyway). No real reason to make this change
other than that it possibly prevents nasty surprises in the future, so I
feel more comfortable about it.
Seems like I really like this C99 idiom. No reason not to generalize it
do snprintf(). Introduce mp_tprintf(), which basically this idiom to
snprintf(). This macro looks like it returns a string that was allocated
with alloca() on the caller site, except it's portable C99/C11. (And
unlike alloca(), the result is valid only within block scope.)
Use it in 2 places in the vo_opengl code. But it has the potential to
make a whole bunch of weird looking code look slightly nicer.
Can be enabled via --vd-lavc-dr=yes. See manpage additions for what it
does.
This reminds of the MPlayer -dr flag, but the implementation is
completely different. It's the same basic concept: letting the decoder
render into a GPU buffer to avoid a copy. Unlike MPlayer, this doesn't
try to go through filters (libavfilter doesn't support this anyway).
Unless a filter can work in-place, DR will be silently disabled. MPlayer
had very complex semantics about buffer types and management (which
apparently nobody ever understood) and weird restrictions that mostly
limited it to mpeg2 style codecs. The mpv code does not do any of this,
and just lets the decoder allocate an arbitrary number of untyped
images. (No MPlayer code was used.)
Parts of the code based on work by atomnuker (starting point for the
generic code) and haasn (some GL definitions, some basic PBO code, and
correct fencing).
Refactor the image allocation code, and expose part of it as helper
code. This aims towards allowing callers to easily allocate mp_image
references from custom-allocated linear buffers. This is exposing only
as much as what should be actually required.
Remove the feature of adding read-only frames to mp_image_pool_add().
This makes no sense, because an image pool is an allocator, and must
always return writable images. Also check these assumptions earlier.
In addition to using the new VAO mechanism introduced in the previous
commit, this tries to keep the OSD code self-contained. This doesn't
work all too well (because of the pass and CMS stuff), but it's still
better than before.
This removes VAO handling from video.c. Instead the shader cache will
create the VAO as needed. The consequence is that this creates a VAO
per shader, which might be a bit wasteful, but doesn't matter anyway.
Reduce this to 1 draw call per OSD pass. This removes the need for some
annoying special handling regarding 3D video support (we supported
duplicating the OSD/subtitles for side-by-side 3D output etc.).
Remove the unneeded texture sampler uniform thing.
Remove this code because it could be argued that it contains GPL-only
code (see commit 642e963c86 for details).
The remaining aspect methods appear to work just as well, are
potentially more compatible to other players, and the code becomes much
simpler.
These are apparently expensive on some drivers which are not smart
enough to turn x/42 into x*1.0/42. So, do it for them.
My great test framework says it's okay
It seems like adjusting the raw stream ID should be done only for DVD.
Otherwise, getting the subtitle language for Bluray breaks.
Untested. Regression since fb9a32977d.
Fixes#4611 (probably).
Performance seems pretty much unchanged but I no longer get nasty spikes
on NUMA systems, probably because glBufferSubData runs in the driver or
something.
As a simplification of the code, we also just size the PBO to always
have the full size, even for cropped textures. This seems slower but not
by relevant amounts, and only affects e.g. --vf=crop. It also slightly
increases VRAM usage for textures with big strides.
This new code path is especially nice because it no longer depends on
GL_ARB_map_buffer_range, and no longer uses any functions that can
possibly fail, thus simplifying control flow and seemingly deprecating
the manpage's claim about possible image corruption.
In theory we could also reduce NUM_PBO_BUFFERS since it doesn't seem
like we're streaming uploads anyway, but leave it in there just in
case some drivers disagree...
Lua scripts can call osd_set_external() early (before the VO window is
created and obj->vo_res is filled), in which case the PlayResX field
would be set to nonsense, and libass would print a pointless warning.
There's an easy and a hard fix: either just go on and pass dummy values
to libass (basically like before, just clamp them to avoid the values
which make libass print the warning). Or attempt to update the PlayRes
field to correct values on rendering (since at rendering time, you
always know the screen size and the correct values). Do the latter.
Since various things use PlayRes for scaling things, this might still
not be fully ideal. This is a general problem with the async scripting
interface.
This API isn't deprecated (yet?), but it's still inferior and harder to
use than avcodec_free_context().
Leave the call only in 1 case in af_lavcac3enc.c, where we apparently
seriously close and reopen the encoder for whatever reason.
STREAM is better than DYNAMIC because we're only using it once per
frame. As for COPY vs DRAW, that was pretty much incorrect to begin with
- but surprisngly, COPY is actually faster (sometimes significantly so,
e.g. on my NUMA system).
After testing, the best I can gather is that it has to do with the fact
that COPY requires fewer redundant memcpy()s, and also 3x reduce RAM
bandwidth (in theory).
Anyway, that bit shouldn't introduce any regressions, it's just a
documentation update. Maybe I'll change my mind about the comment again
the future, it's really hard to tell. Vulkan, please save us!
Instead of allocating three PBOs and cycling through them, we allocate
one PBO that's three times as large, and cycle through the subregion
offsets.
This results in arguably simpler code and faster initialization
performance. Especially for 4K textures, initializing PBOs can take
quite some time (e.g. 180ms -> 110ms). For 1080p, it's more like 66ms ->
52ms for me.
The alignment to 4096 is completely unnecessary by spec, but we do it
anyway just for peace of mind.
This is unnecessary to call from gl_video_resize, because the hooks only
(possibly) change when the actual vo_opengl options change. This used to
be required back when mpv still had prescaling built in, but since that
was all moved to user shaders and the code removed, this is a left-over
artifact.
It used to use the "encoding" section. Change this to the default
section to remove another small special case. encoding-profiles.conf
didn't use this by default anyway. The previous revert could mitigate
potential impacts of this a little.
This reverts commit 0dcb51c7fa.
I randomly decided that this was better. It can be re-applied once it
actually becomes necessary in some way.
Note that this worked fine. My main gripe with this is that it can
spam the log file with encoding stuff even if playback mode is used.
This is more of a niche usecase than --ytdl-format and --ytdl-raw-options,
so a simple script option should be enough.
Either create lua-settings/ytdl_hook.conf with
'exclude=example.com,sub.example.com' option or
"--script-opts=ytdl_hook-exclude=example.com,sub.example.com"
The renderer code doesn't list a fixed set of supported formats, but
supports anything that is described by AVPixFmtDescriptor and follows a
number of constraints.
Plane order is not included in those constraints. This means the planes
could be in random order, rather than what the vo_opengl renderer
happens to assume. For example, it assumes that the 4th plane is alpha,
even though alpha could be on any plane. Likewise it assumes that plane
0 was always luma, and planes 2/3 chroma. (In earlier iterations of
format support, this was guaranteed by MP_IMGFLAG_YUV_P, but this is not
used anymore.)
Explicitly set the plane semantics (enum plane_type) by the component
descriptors and the used colorspace. The behavior should mostly not
change, but it's less likely to break when FFmpeg adds new pixel
formats.
Use avcodec_free_context() unstead of random other calls. Actually it
was already used in the second case, but calling avcodec_close() is
redundant.
Don't crash if allocating a codec context fails.
With some newer ANGLE builds, mapping can fail with "Failed to create
EGL surface" during playback. The reason is unknown, and it might just
be an ANGLE bug. Probe whether it works at init time to avoid the
problem.
Commit d5702d3b95 messed up the order of destruction of the elements: it
destroyed the avctx before the hwaccel uninit, even though the hwaccel
uninit could access avctx. This could happen with some old hwaccels
only, such as D3D ones before the new libavcodec hwaccel API.
Fix this by making use of the fact that avcodec_flush_buffers() will
uninit the underlying hwaccel. Thus we can be sure avctx is not using
any hwaccel objects anymore, and it's safe to uninit the hwaccel.
Move the hwdec_dev dstruction code with it, because otherwise we would
in theory potentially create some dangling pointers in avctx.
In commit 6eb0bbe this was changed from xs[n] to use gl_format.chroma_w
indiscriminately, which broke chroma rendering when zooming/cropping.
The solution is to only use chroma_w for chroma planes.
Fixes#4592.
Previously, the entire convert_buffer was being copied to the desination without
regard to the fact that it may be packed and therefore smaller.
The allocated conversion buffer was also way to big
bytes * (channels * samples) ** 2
instead of
bytes * channels * samples
This shouldn't affect which are chosen, but it should speed up the search by
putting more common configurations earlier so that a working sample format and
sample rates can be found sooner obviating the need to search them for each
iteration of the outer loops.
The loop to select the native wasapi_format for the incoming audio was
not breaking correctly when it found the most desirable format. It
therefore executed completely leaving the least desirable format (u8) as
the choice.
fixes#4582
On optional hook points, we store to a temp FBO and then read from it
again to complete any operations that may still be left (e.g.
sigmoidization after MAIN/LINEAR).
In theory this mechanism should be reworked to avoid the temporary FBO
until the next time we actually need one - and also skip redundant
passes if we the next thing we need *is* a FBO - but both are those are
tricky. Anyway, in the meantime, at least we can label the
(semi-)redundant passes that get generated when using user shaders.
This just indicates a fixed linear coefficient to multiply into the
signal, similar to the old option --target-brightness (but the inverse
thereof). Good for testing purposes, which is why I added it. (This also
corresponds somewhat to what zimg does)
This is the last sample format that was only in mpv and not in FFmpeg
(except the spdif special formats). It was a huge pain, even if the
removed code in af_lavrresample is pretty small after all.
Note that this drops S24 from the ao_coreaudio AOs too. I'm not sure
about the impact, but I expect it doesn't matter.
af_fmt_change_bytes() was unused as well, so remove that too.
I'd actually be somewhat interested in supporting this, as it could help
testing the S24 conversion code. But then again it's only a pain,
there's no immediate need, and it would require new options to make
ao_pcm.c select this output format at all.
Do conversion directly, using the infrastructure that was added before.
This also rewrites part of format negotation, I guess.
I couldn't test the format that was used for S24 - my hardware does not
report support for it. So I commented it, as it could be buggy. Testing
this with the wasapi_formats[] entry for 24/24 uncommented would be
appreciated.
Instead of the infrastructure added in the previous commit to do the
conversion within the AO.
If this is used, and snd_pcm_status_get_avail() returns more frames than
snd_pcm_write*() actually accepts, you will get some nice audio
corruption.
Also, this mutates the data passed via play(), which is rather fishy,
but sort of doesn't matter for now. Surely this will cause unintended
bugs and WTFs.
I plan to remove the S24 sample formats in mpv. It seems like we should
still support this _somehow_ in AOs though. So the idea is to convert
the data to more obscure representations (that would not be useful for
filtering etc. anyway) within the AO.
This commit adds helper to enable this. ao_convert_fmt is meant to
provide mechanisms for this, rather than a generic audio format
description (as the latter leads only to overly generic misery). The
conversion also supports only cases which we think will be needed at
all.
The main advantage of this approach is that we get S24 out of sight,
and that we could support other crazy formats (like S20). The main
disadvantage is that usually S32 will be selected (if both S32 and S24
are available), and there's no user control to force S24. That doesn't
really matter though, and at worst makes testing harder or will lead
to unpleasant arguments with audiophiles (they'd be wrong anyway).
ao_convert_fmt.pad_lsb is ignored, although if we ever find a case in
which playing S32 with data in the LSBs breaks when playing it as padded
24 bit format. (For example, WAVEFORMATEXTENSIBLE recommends setting the
unused bits to 0 if wValidBitsPerSample implies LSB padding.)
It's now possible to request non-dumb mode as a user, even when not
using any non-dumb features. This change is mostly intended for testing,
so I can easily switch between dumb and non-dumb mode on default
settings. The default behavior is unaffected.
This backend is selected if vaapi is available, but vaapi-over-EGL is
not. This causes various issues around the forced RGB conversion, which
is done with fixed, usually incorrect parameters.
It seems the existing auto probing check is too weak, and doesn't really
prevent it from getting loaded. Fix this by adding a flag to not ever
load this during auto probing.
I'm still not deleting it, because it's useful for testing on nvidia
machines.
See #4555.
The current algorithm blew up when the color was negative, such as the
case when downscaling with dscale=mitchell or other algorithms that
introduce negative ringing. The simplest solution is to just slightly
change the calculation to force both parameters to be in-range.
Was at least somewhat broken, and is misleading. I don't really have an
idea why FFmpeg has two AVOptions here anyway. We don't need to care,
and I'm only aware of 1 user trying this option ever.
See #4579.
HOME isn't set by default on Windows. But if the user does set it,
prefer it by default.
Enables stuff like --log-file=~/mpv.log to work, even if HOME isn't set.
The first time I saw a user try to use this option, and apparently it
didn't work. I'm not exactly sure why, but the code seems to be broken
anyway. Apart from not doing any error checking (neither mallocs nor
warning the user against invalid input), it forgets to add a 0
terminator.
Use the corresponding AVOption instead, which probably works.
See #4579.
This is exposed so that bjin/mpv-prescalers can use textureGatherOffset
for performance.
Since there are now quite a lot of parameters where it isn't quite clear
why they're all defined, add a paragraph to the man page that explains
them a bit.
This helps prevent unnaturally, weirdly colorized blown out highlights
for direct images of the sunlit sky and other way-too-bright HDR
content. I was debating whether to set the default at 1.0 or 2.0, but
went with the more conservative option that preserves more detail/color.
This logic doesn't really make sense. copy_img_tex already binds the
texture, so why would we bind it a second time? Furthermore, nothing
actually uses this return value. Must have been some left-over artifact
of a previous iteration of this function. Anyway, it's harmless, just
nonsensical. So remove it.
This is more efficient on my machine (nvidia), but only when applied to
groups of exactly 4 texels. So we switch to the more efficient
textureGather for groups of 4. Some notes:
- textureGatherOffset seems to be faster than textureGather by a
non-negligible amount, but for some reason, textureOffset is still
slower than a straight-up texture
- textureGather* requires GLSL 400; and at least on nvidia, this
requires actually allocating a GL 4.0 context.
- the code in opengl/common.c that clamped the GLSL version to 330 is
deprecated, because the old user shader style has been removed
completely in the meantime
- To combat the growing complexity of the polar sampling code, we drop
the antiringing functionality from EWA shaders completely, since it
never really worked well for EWA to begin with. (Horrific artifacting)
Instead of PostMessage, use SendNotifyMessage from the SendMessage
family of functions to wake up the Win32 thread from the VO thread. When
a message is sent rather than posted between threads, it ends up in a
different queue which is processed before posted messages and can be
processed in more places. This prevents a playback glitch when clicking
on the titlebar, but not moving the window. With PostMessage-based
wakeups, VOCTRLs could be delayed for up to 500ms after the user clicks
on the titlebar, but with SendNotifyMessage, they still complete in
under a millisecond.
Also, instead of handling WM_USER, process the dispatch queue before
every message. This ensures the dispatch queue is processed as soon as
possible. WM_NULL is used to wake up the window procedure in case there
are no other messages being processed.
This sets AV_HWACCEL_FLAG_ALLOW_PROFILE_MISMATCH, which some hwaccels
using the new generic API respect. These do profile selection in
libavcodec, so it can be controlled only with an external flag, instead
of in mpv code like it used to be done.
They have been deprecated for a decade, yet you're forced to explicitly
deal with them at every step, or they will break your shit.
FFmpeg insists on keeping them, because libavfilter is too stupid to
deal with color ranges properly. Ridiculous.
- change asserts to silent exits
- check all pointers before use
- move the p->pass initialization code to the right place
This should hopefully cut down on the amount of crashing by making the
code fundamentally more robust, while also fixing a concrete issue where
opengl-cb failed to initialize p->pass.
This seems to reduce glitches when resizing a --wid program (or it could
be a placebo.) Since we don't need the WM_WINDOWPOSCHANGING handler in
--wid mode, it should be fine.
This allows filter functions to be prematurely cut off once their
contributions start becoming insignificant. This effectively prevents
wasted GPU time sampling from parts of the function that are essentially
reduced to zero by the window function, providing anywhere from a 10% to
20% speedup. (5700μs -> 4700μs for me)
This is more confusing than it helps, and forces escaping more stuff.
For example, for string lists we could remove all need for escaling with
-add and -pre.
The user can simply use multiple of those options.
Remove the various redundant m_config_set_option* calls, rename the
remaining one to m_config_set_option_cli(), and merge the
m_config_parse_option() function.
Now it's sourced from the etc/ PNG files directly, instead of
preprocessing them with imagemagick.
Add some ad-hoc code to decode PNG files with libavcodec. At least we
can drop the zlib code in exchange.
Actually contains some code fragments by Michael Niedermayer (command
line stuff, video equalizer), thus it can be LGPL only once the formal
requirement of mpv's core being LGPL is fulfilled.
2f41c4e8 exposed some other edge cases as well. Globally resetting the
pass info was not the right way to go about it, because we don't know in
advance what the frame type is going to be - at least not with the
current code structure. (In principle, we could separately indicate the
frame type and the pass type and then only reset it on the first
actual pass_describe call, but that's annoying as well)
Also fixes a latent issue where p->pass was never initialized, which
broke the MP_DBG debugging code in some cases.
Since all existing code does gl_video_upload immediately followed by
pass_render_frame, we can just move the upload into pass_render_frame
itself, which arguably makes more sense anyway.
This replaces `vo-performance` by `vo-passes`, bringing with it a number
of changes and improvements:
1. mpv users can now introspect the vo_opengl passes, which is something
that has been requested multiple times.
2. performance data is now measured per-pass, which helps both
development and debugging.
3. since adding more passes is cheap, we can now report information for
more passes (e.g. the blit pass, and the osd pass). Note: we also
switch to nanosecond scale, to be able to measure these passes
better.
4. `--user-shaders` authors can now describe their own passes, helping
users both identify which user shaders are active at any given time
as well as helping shader authors identify performance issues.
5. the timing data per pass is now exported as a full list of samples,
so projects like Argon-/mpv-stats can immediately read out all of the
samples and render a graph without having to manually poll this
option constantly.
Due to gl_timer's design being complicated (directly reading performance
data would block, so we delay the actual read-back until the next _start
command), it's vital not to conflate different passes that might be
doing different things from one frame to another. To accomplish this,
the actual timers are stored as part of the gl_shader_cache's sc_entry,
which makes them unique for that exact shader.
Starting and stopping the time measurement is easy to unify with the
gl_sc architecture, because the existing API already relies on a
"generate, render, reset" flow, so we can just put timer_start and
timer_stop in sc_generate and sc_reset, respectively.
The ugliest thing about this code is that due to the need to keep pass
information relatively stable in between frames, we need to distinguish
between "new" and "redrawn" frames, which bloats the code somewhat and
also feels hacky and vo_opengl-specific. (But then again, this entire
thing is vo_opengl-specific)
For some braindead reason, Microsoft decided to prevent you from
dynamically loading system libraries. This makes portability harder.
And we're talking about portability between Microsoft OSes!
This partially reverts the change from a longer time ago to always build
DXVA2 and D3D11VA together.
To make it simpler, we change the following:
- building with ANGLE headers is now required to build D3D hwaccels
- if DXVA2 is enabled, D3D11VA is still forcibly built
- the CLI vo_opengl ANGLE backend is now under --egl-angle-win32
This is done to reduce the dependency mess slightly.
Slightly cleaner, possibly slightly more correct. (The last case should
be dead code now. In general, we can't know the implied colorspace from
a AV_PIX_FMT, at least not if FFmpeg adds a new one.)
It never worked. It relied on some obscure texture format to provide the
equivalent of GL_RG or GL_LUMINANCE_ALPHA, but no hardware seemed to
report support for it ever. No idea what's the correct way to do this.
On D3D11 it exists, of course.
(Actually I'd like to remove the whole VO.)
Another legacy annoyance. The only place where packed YUV is still
important is slightly older Apple hardware or drivers, which require
it for efficient hardware decoding.
Instead of setting up a weird swizzle (which is linked to how the
internal renderer code works, rather than the generic format code), add
per-component mapping to gl_imgfmt_desc.
The renderer still computes the weird swizzle, but at least it's
confined to itself. Also, it appears the hwdec backends don't need this
anymore.
It's really nice that the messy init_format() goes away too.
The changes to path list options is basically getting rid of the need to
pass multiple paths to a single option. Instead, you can use the option
multiple times. The old behavior can be used by using the -set suffix
with the option.
Change some options to path lists. For example --script is now append by
default, and if you use --script-set, you need to use ":"/";" as
separator instead of ",".
--sub-paths/--audio-file-paths is a deprecated alias now, and will break
if the user tries to pass multiple paths to it. I'm assuming that if
these are used, most users will pass only 1 path anyway.
--opengl-shaders has more compatibility handling, since it's probably
rather common that users pass multiple options to it.
Also document all that in the manpage.
I'll probably regret this later, as it somewhat increases the complexity
of the option parser, rather than increasing it.
This takes car eof unsubtle bugs if something at init does not work
(specifically if mp_new_client() returns NULL). It also removes the need
for that PMP MF hack.
I noticed that the previous default, bitstream, actually breaks with
some shitty anamorphic DVD rips that signal square pixel aspect in the
bitstream. So I think the "container" method is a better default.
For vo_opengl and vo_direct3d, these are supported in a generic way.
For vf_vapoursynth, we could probably map its VSFormat struct in a
generic way, but for now do some bullshit.
vf_eq.c actually loses support for these formats. We could add generic
support too (anything that has 8 bit planes will work), but why bother.
The filter is deprecated anyway.
Add something that allows is to extract the component order from various
RGBA formats. In fact, also handle YUV, GBRP, and XYZ formats with this.
It introduces a new struct mp_regular_imgfmt, that hopefully will
eventually replace struct mp_imgfmt_desc. The latter is still needed by
a lot of code though, especially generic code. Also vo_opengl still uses
the old one, so this commit is sort of incomplete.
Due to its genericness, it's also possible that this commit introduces
rendering bugs, or accepts formats it shouldn't accept.
UWP does not support the whole IMMDevice API. Instead, you need to use a
new API (available starting from Windows 8), which is in addition not in
MinGW, and extremely unpleasant to use.
The wasapiuwp2.dll wrapper is a small custom MSVC DLL, which does this
instead, and returns a normal IAudioClient.
Before this, ao_wasapi did not initialize on UWP.
While this is perfectly OK on Unix, it causes annoying valgrind
warnings, and might be otherwise confusing to others.
On Windows, the runtime can actually abort the process if this is
called.
push.c part taken from a patch by Pedro Pombeiro.
In a bunch of cases, we emulate highly platform specific APIs on a
higher level across all OSes, such as IPC, terminal, subprocess
handling, and more. We have source files for each OS, and they implement
all the same mpv internal API.
Selecting which source file to use on an OS can be tricky, because there
is partially overlapping and emulated APIs (consider Cygwin on Windows).
Add a pick_first_matching_dep() function to make this slightly easier
and more structured.
Also add dummy backends in some cases, to deal with APIs not being
available.
Clarify the Windows dependency identifiers, as these are the most
confusing.
The code accounting for the terrible AUDCLNT_E_BUFFER_SIZE_NOT_ALIGNED
semantics (which MSDN claims can happen "starting with Windows 7" - so
probably on Windows 10 too) duplicated the call for creating the
IAudioClient. That's not great, so get rid of it.
Let wasapi_thread_init() handle this. It has a retry loop anyway. This
redoes device lookup and format negotiation, but potential failures due
to race conditions (what if the driver decides to change behavior)
shouldn't be worse than before.
Apparently, this messes up on wraparound (although it shouldn't). After
2^32 bytes an audio "blip" happens with AOs that use this ringbuffer.
Whatever, we can fix this by switching to a 64 bit counter. There's also
a good chance the ringbuffer will be dropped completely, so don't waste
more time on this.
Commit 3fb6380 was supposed to increase MAX_TEXTURE_HOOKS but instead
increased SHADER_MAX_HOOKS, since I forgot that they were separate (for
whatever reason).
To prevent this mistake from happening again, and to unify the location
in which user_shader-specific #defines are placed, get rid of the two
constants in opengl/video.c and move/reuse them from user_shaders.h
instead.
Also bump up MAX_SAVED_TEXTURES (now SHADER_MAX_SAVED) slightly as a
precaution against adding more passes to vo_opengl. I think we're
already flirting with the limit.
There is no technical need for this, but it's nicer if --list-options
appears to output them sorted (it only actually sorts the actual option
list, while actions are output in the order they are defined).
This means you can use --sub-file-set=a,b,c to set a string list
separated by ',', while --sub-file=filename,with,commas.srt still works
(the original motivation for changing the --sub-file option this way).
You can also use it to append strings to string list options without the
need for escale, e.g.: --opengl-shaders-add-str=unescapesdfilename.glsl
(The normal -add for some reason expects a ',' separated list as
argument.)
These are not "really" separate actions, but on the command line they're
obserable as such. So it would be a good idea to list them too.
Adds about 117 options (holy fuck).
This is even better at preventing discoloration than tone mapping on the
XYZ image. Partly inspired by the HLG OOTF. Also simplifies the way we
tone map, and moves this logic to the pass_tone_map function where it
belongs.
This also fixes what could arguably be considered a bug in the HLG
implementation when using HLG for non-BT.2020 colorspaces, which is not
permitted by spec but thinkable in theory. Although in this case, I
guess it will be arbitrary whether people use the BT.2020-normalized
luma coefficients or change it to fit the colorspace, so I guess either
way could be considered "right", depending on what people end up doing.
Either way, in lieue of standard practice, we do what makes the most
sense (to me), and hopefully others will follow.
The downside is that we upload an extra vec3 uniform even if we don't
use it, but eliminating that would be ugly.
For HLG, due to the usage of a reference OOTF configured for 1000 cd/m²,
the default sig_peak of =nom_peak was suboptimal. We can go down to
1000/100 (=10.0), since that's the true dynamic range of the output
signal after it passes through the OOTF.
This affects options like --vf or --display-tags. These used a "*"
suffix to match all options starting with a specific name, and handled
the rest in the option parser. Change this to remove the "*" special
case, and require every option parser to declare a list of allowed
suffixes via m_option_type.actions.
The new way is conceptually simpler, because we don't have to account
for the "*" in a bunch of places anymore, and instead everything is
centrally handled in the CLI part of the option parser, where it's
actually needed.
It automatically enables suffixes like -add for a bunch of other
stringlist options.
You could do mpv_set_option(h, "no-fs", ""), which would behave like
"--no-fs" on the command line. At one point, this had to be emulated for
compatibility, and printed a deprecation warning. This was almost a year
ago, so remove it.
While I'm not particularly attached to this, the history is pretty
simple, and all relevant authors have agreed.
2f004875: removed in 2c693a47, patch author was not asked.
1ef239a4: removed, author was not asked.
This makes things like --show-profile=enc-v-h264 just work again.
Currently I don't see a reason why we should not always load the
encoding profiles. Although I guess this used to be different in the
past. (It probably won't take long until I revert this again - seems
like a fight you can't win for some reason.)
Fixes#4551.
This is only for the comments, but since the old syntax is "discouraged"
(and might change semantics one day), we should use the new syntax in
all documentation-like things.
Before this change, AOs could have internal alignment, and play() would
not consume the trailing data if the size passed to it is not aligned.
Change this to require AOs to report their alignment (via period_size),
and make sure to always send aligned data.
The buffer reported by get_space() now always has to be correct and
reliable. If play() does not consume all data provided (which is bounded
by get_space()), an error is printed.
This is preparation for potential further AO changes.
I casually checked alsa/lavc/null/pcm, the other AOs might or might not
work.
These can never be uninitialized because the enum cases are exhaustive and
the fallback is in the correct order, but GCC is too dumb to understand
this.
Also explicitly initialize tex_type, because while GCC doesn't warn
about it (for some reason), maybe it will in the future.
All relevant authors have agreed.
I'm removing the NV12 FourCC, which was added in f910f3d9 by someone who
was not contacted for the relicensing. I doubt the remaining code is
copyrightable (basically all what remains the fact is that NV12 uses the
same amount of space like YV12), but in this case I feel more
comfortable removing it.
Might contain some trace amounts of "michael"'s copyright, who agrees
with LGPL only once the core is relicensed - but with the core already
mostly relicensed, I'm changing the license header to LGPL, and only
marking this in the "Copyright" file.
cehoyos, who did not agree to the relicensing, added bcb5c78ce3. If
there was copyright, we consider it gone, because the table changed. It
does not map file extension to a FourCC anymore, and codecs.conf is
gone. The new mapping is a libavcodec codec name (happens to be the same
as the file extension).
The same applies to commits 60ecafec, b749836b, 5b3e3be1. None of these
authors were contacted. These were before the code was replaced with a
table (in d0326807). The parts outside of demux_mf.c were removed a long
time ago. Like in the previous comment, we don't think any copyright
applies at least to the new code (at least after the FourCC removal).
iive authored 0aa37a0d, which is probably still left in some form, and
makes demux_mf.c "LGPL 3 or later".
stream_avdevice.c (unrelated) has been marked as LGPL before.
I'm not even sure when/if FFmpeg produces those. It's just confusing. If
you really need this, you can still use dl-dr. I expect that most use is
unintentional.
Probably fixes#4545.
Right now, the current order pretty much means that pulse defaults to
S16 for arbitrary unsupported formats, but fallback to float would make
more sense since it's the easiest to convert everything to without
requiring dithering, and PA will probably just internally convert things
to float anyway.
Also move S32 above S16, which essentially means format_maps is sorted
by preference. (Although ao_pulse currently ignores this and always
picks the first as a fallback)
This was an annoying option type. And still is. But at least it's on the
same level as m_option_type_print_fn now, and can probably cleaned up
further like it. Both types are for options that are only on the command
line, always have special handling (i.e. do something with them in
parse_commandline.c before passing them to the generic
m_config.c/m_option.c layers), and are m_options only for --list-options
and (oddly) the split_opt_silent() function.
This was especially grating because it causes problems with the
option/property unification, uses as only thing OPT_FLAG_STORE, and
behaves weird with the client API or scripts.
It can be reimplemented in a much simpler way, although it needs
slightly more code. (Simpler because less special cases.)
- Fix a signed/unsigned comparison involving info.segment_uid.len
(doesn't actually warn here, but seems fragile). Code was previously
safe though.
- Match up all printf format strings with the respective value types,
using the *int*_t printf specifiers where necessary, and fixing
multiple signed/unsigned differences. Removed some casts that
otherwise may have truncated values.
- Fix a warning when initializing ebml_info.
These files have all in common that they were fully or mostly taken from
mplayer.c. (mplayer.c was a huge file that contains almost all of the
playback core, until it was split into multiple parts.) This was
probably the hardest part to relicense, because so much code was moved
around all the time.
player/audio.c still does not compile. We'll have to redo audio
filtering. Once that is done, we can probably actually provide an
actual LGPL configure switch.
Here is a relatively detailed list of potential issues:
8d190244: author did not reply, parts were made GPL-only in a previous
commit.
7882ea9b: author could not be reached, but the code is gone. wscript
still has --datadir switch, but I don't think this is relevant to
copyright.
f197efd5: unclear origin, but I consider the code gone anyway (replaced
with generic OSD mechanisms).
8337d9c2: author did not reply, but only the option still exists (under
a different name), other code was removed.
d8fd7131: did not reply. Disabled in a previous commit.
05258251: same author as above. Both fields actually seem to have
vanished (even when tracking renames), so no action taken.
d459e644, 268b2c1a: author did not reply, but we reuse only the options
(with different names and slightly or fully different semantics, and
completely different implementations), so I don't think this is relevant
for copyright.
09e742fe, 17c39c4e: same as above.
e8a173de, bff4b3ee: author could not be reached. The commands were
reworked to properties, and the code outside of the TV code were moved
back to the TV code. So I don't think copyright applies to the current
command.c parts (mp_property_tv_color, mp_property_tv_freq,
mp_property_tv_scan). The TV parts remain GPL.
0810e427: could not be reached. Disabled in a previous commit.
43744a2d: unknown author, but this was replaced by dynamic alloc (if the
change is even copyrightable).
116ca0c7: unknown author; reasoning see input.c relicensing commit.
e7e4d1d8: these semantics still exist, but as generic code, and this
code was fully removed.
f1175cd9: the author of the cited patch is unknown, and upon inspection
it turns out that I was only using the idea to pause the player on EOF,
so I claim it's not copyright relevant.
25affdcc: author could not be reached (yet) - but it's only a function
rename, not copyrightable.
5728504c was committed by Arpi (who agreed), but hints that it might be
by a different author. In fact it seems to be mostly this patch:
http://lists.mplayerhq.hu/pipermail/mplayer-dev-eng/2001-November/002041.html
The author did not respond, but it all seems to have been removed later.
It's a terrible mess though. Arpi reverted the A-V sync code at first,
but left the RTC code for a while. The following commits remove these
changes 100%: 14b35442, 7181a091, 31482783, 614f8475, df58e822.
cehoyos did explicitly not agree to LGPL, but was involved in the
following changes:
c99d8fc8: applied a patch and didn't modify it, the original author
agreed.
40ac0d31: author could not be reached, but all code is gone anyway. The
"af" command has a similar function, but works completely different and
actually reuses a mechanism older than this patch.
54350436: applied a patch, but didn't modify it, except for adding a
German translation, which was removed later.
a2dda036: same situation as above
240b743e: this was made GPL-only in a previous commit
7b25afd7: same as above (for now)
kirijua could not be reached, but was a regular patch contributor:
c2c997fd: video equalizer code move; probably not copyrightable. Is GPL
due to Nick anyway.
be54f481: technically, this became the audio track property later. But
all what is left is the fact that you pass a track ID to it, so consider
the original coypright non-relevant.
2f376d1b: this was rewritten in b7052b43, but for now we can afford to
be careful, so this was marked as GPL only in a previous commit.
43844d09: remaining parts in main.c were reverted in a previous commit.
anders has mostly disagreed with the LGPL relicensing. Does not want
libaf to become LGPL, but made some concessions. In particular, he
granted us permission to relicense 4943e9c52c and 242aa6ebd4. We also
consider some of his changes remaining in mpv not relevant for copyright
(such as 735de602 - we won't remove the this option completely). We will
completely remove his other contributions, including the entire audio
filter chain. For now, this stuff is marked as GPL only. The remaining
question is how much code in player/audio.c (based on the former
mplayer.c and dec_audio.c) is under his copyright. I made claims about
this in a previous commit.
Nick(ols) Kurshev, svn username "nick" and "nickols_k", could not be
reached. He had a lot of changes in early MPlayer. It seems all of that
was removed, at least in mpv. His main work, like VIDIX or libswscale
work, does not exist in mpv anymore, but the changes to mplayer.c and
other core parts still deserve attention:
a4119f6b, fb927549, ad3529b8, e11b23dc, 5f2178be, 93c371d5: removed in
b43d67e0, d1628d12, 24ed01fe, df58e822.
0a83c6ec, 104c125e, 4e067f62, aec5dcc8, b587a3d6, f3de6e6b: DR, VAA, and
"tune" stuff was fully removed later on or replaced with other
mechanisms.
340183b0: screenshots were redone later (the VOCTRL was even removed,
with an independent implementation using the same VOCTRL a few years
later), so not relevant anymore. Basically only the 's' shortcut remains
(but not its implementation).
92c5c274, bffd4007, 555c6766: for now marked as GPL only in a previous
commit.
Might contain some trace amounts of "michael"'s copyright, who agreed to
LGPL only once the core is relicensed. This will still be respected, but
I don't think it matters at this in this case. (Some code touched by him
was merged into mplayer.c, and then disappeared after heavy
refactoring.)
I tried to be as careful and as complete as possible. It can't be
excluded that amends to this will be made later.
This does not make the player LGPL yet.
"anders" has not agreed to relicense most of his changes (although he
gave permission for 4943e9c52c and 242aa6ebd4).
Note that commit 3053a8b7f is in part also affected. The commit message
hides this, but it seems some code was based on anders':
http://mplayerhq.hu/pipermail/mplayer-dev-eng/2002-October/011773.html
Much of the final commit was by Arpi, but it's still grating that there
was no proper attribution (and in a case that turned out to be so
important).
This means player/audio.c won't even compile (and other parts of the
player also use audio/audio.h, which is still GPL). But whether the end
result compiles doesn't matter for copyright.
Due to the heavy refactoring applied over the year, the boundaries are
rather fuzzy and also somewhat arbitrary, though.
Most of this code will have to be replaced with a new filter chain
later.
I think the idea is that you can pass multiple help options on the
command line, and it will print them all, instead of printing only the
first one and exiting. This was added in commit 43844d09, but the patch
author could not be reached. Revert it, as it's not a critical feature.
This was added in 0810e4275. The patch author did not reply (yet). Not
sure if copyrightable, but I'm making the still existing C part GPL-only
for now (in a previous commit).
Commit d8fd7131 changes this. "tibcu" did not reply. While I'm not sure
whether copyrightable code remains, I'd tend towards saying yes (the
basic idea is still intact after years of refactoring), so make it
GPL-only for now.
Nick and kiriuja could not be reached, and created/changed this in
92c5c274, 6441a5ad, bffd4007, 555c6766, c2c997fd. The video equalizer
stuff was redone fully later, but there are still parts that look too
similar and basically use the same approach. I'm more comfortable with
declaring it GPL only for now.
I plan to redo them later in a way that will remove copyright.
cehoyos, who did not agree to the LGPL relicensing, added this in commit
240b743e. The actual implementation of it is already guarded with
HAVE_GPL. The field_dominance field in the option struct won't be
guarded.
We won't keep GPL-only core code forever, so deprecate it as well. To
apply forced deinterlacing, a libavfilter filter can probably be
removed, or we merge this functionality into the --deinterlace option
(without using copyrighted stuff).
cehoyos has not agreed to the LGPL relicensing. He added the deinterlace
property in commit 7b25afd7. Make it GPL-only for now. The still working
parts of the --deinterlace option are not affected by his copyright.
It was extended by "seru" in 8d190244. This person could not be reached
(or does not reply), and it's in the way of LGPL relicensing. Deprecate
it, and mark the (probably) affected parts of the code with HAVE_GPL. To
be fair, even though the osd.c parts were refactored from the original
code, there's probably no copyright by seru on it. But for now play it
save. The mere existence of a 3rd OSD level is certainly not
copyrightable, so you still can set osd-level to 3 - just that it does
nothing.
If they are copyrightable, iive's changes (commits listed in cache.c)
would make them LGPL 3+. To avoid that options.c becoming LGPL 3, move
the option declarations to cache.c. struct mp_cache_opts is still in
options.h, but we consider that irrelevant, and options.h will become
LGPL 2.1+ later.
On some platforms, unsigned long and uint64_t aren't the same type,
after all. As this is just a MP_VERBOSE message, risking truncation in
some cases seems OK.
This reverts commit e30fe38a21.
The original author as well as the author from d568eaa2 agreed to LGPL
now. The only one missing is 0842caf6 (Henk could not be reached, and
that will probably stay this way).
When I discussed this with someone else who knows a lot about copyright
(j-b), the conclusion was that the rewrite was actually enough to
remove all past copyright. Only the syntax and the option name remained
the same, but code, code structure, and architecture all changed
radically. So I'm content with dropping the GPL part.
(m_option.c is still formally GPL due to the special agreement with
michael, but once this is fullfilled, we will change the license to
LGPL without further checks.)
The I binding was removed from input.conf (although it's probably not
copyrightable, but still).
bootstrap.py has a bunch of authors which probably make the licensing
situation a pain - but it's not integral part of the build system or the
source code, so it doesn't matter for a LGPL core.
I checked and cleaned up the build system in the last few commits. There
was the possibility that parts of it were based on actual code of the
old "configure" file, in particular with the waftools/fragments/ files
(it turned out some were, some even not covered by LGPL agreements).
This was checked, so I'm confident only the commit mentioned in the
Copyright file holds back proper LGPL licensing of it. (And I guess I
have to wait for a reply.)
I checked the English translations. There used to be help_mp-en.h (or
help_mp.h earlier), which was part of the source code, and which
contained most terminal and GUI messages. This was done for the purpose
of localization, but all localizations were dropped at one point in
mplayer2 development. At this point, the message defines were moved back
to the source code. (While in the years before that, they were moved
from the source code to the file where applicable.) I didn't check
help_mp-en.h when it was merged back. There was the possibility that
someone might have changed one of the English messages (i.e. added his
copyright to it), which then was copied back to the source code, without
accounting for that copyright. Upon checking the history now, it seems
this didn't happen for any code that we want to relicense to LGPL (in
fact, it happened to some messages in the DVD code only).
Most of the DVB test fragment was added in 2e399f39 by someone who
wasn't asked for LGPL relicensing permission. Thus remove it. (For some
weird reason, the configure check wasn't even for the later added actual
DVB code.)
Since DVB is disabled by default, this isn't too bad. But if someone
enables it, and the system doesn't support it, he will receive a weird
compilation error. That has to be good enough, until maybe someone adds
a new check.
This reverts commit 2e81698d28.
Seems like this was a patch applied from someone who can't agree to LGPL
relicensing (see previous commit), with the author field not properly
set.
This is not so important anyway, so just revert it.
The user bugmen0t was apparently a shared github account with publicly
available login. Thus, we can't get LGPL relicensing permission from the
people who used this account. To relicense successfully, we have to
remove all their changes.
This commit should remove 20d1fc13, f26fb009, defbe48d. It also should
remove whatever test fragments were copied from the ancient configure,
as well as some configure logic (potentially that device path stuff).
I think this change still preserves the most important use-cases of OSS:
BSDs, and the Linux OSS emulation (the latter for testing only).
According to an OSS user, the 4front checks were probably broken anyway.
The SunAudio stuff was probably for (Open)Solaris, which is dead.
ao_oss.c itself will remain GPL, and still contains bugmen0t changes.
A relic of mplayer had 'I' as the keybind to show the filename of the
currently playing file on the OSD. mpv does not do this by default.
This commit removes this incorrect information from the mpv manage.
In commit eb22569ff0, I claimed that the geometry parsing code was
rewritten. But I'm not sure if it's rewritten enough, or if copyright
claims could still be made. Given that the original code was
self-contained, and could be considered a separate work, it's probably
safer (and more up to the standards applied to this relicensing) to
leave this as GPL code.
The rewrite/code move can be seen with: git diff f2dcdca...ccaed5e
Although the origins lie somewhere in libaf, which was written by
"anders" and who explicitly disagreed with the LGPL relicensing, we can
change the license of these files, because all code was written by
"alex", who agreed with the relicensing.
The only things that remain from anders' code is the AF_FORMAT_ and af_
prefixes (see e.g. 66f4e563). It was alex who redid this file and added
the format identifiers we have today (507121f7). It's also nice to see
that alex actually claimed copyright on format.c (221a599f). In commit
efb50cab even the bitmask concept (which anders introduced with his
early af_format.c code) was removed, and essentially all lines and
symbols by anders were dropped.
To put it into perspective: the original af_format code was for
converting actual sample data and relied on OSS sample format
identifiers, mpv's format.c/h provides its own sample formats, but
does not do any data conversion.
Remove an now inaccurate comment from format.c (it somehow even survived
the typo that was present in the original commit). Also remove most of
the format.c include statements - most of them are technically anders'
code. We keep limits.h though.
As usual, the history of these files is a bit murky. It starts with the
initial commit. (At which some development had already been done,
according to the AUTHORS and ChangeLog files at the time, we should be
but covered with relicensing agreements, though.) then it goes on with
complete lack of modularization, which was cleaned up later (cd68e161).
As usual, we don't consider the copyright of the stuff that has been
moved out cleanly.
There were also contributions to generic code by people who could not be
reached or who did not agree to the relicensing, but this was all
removed.
The only patches that we could not relicense and which were still in the
current code in some form are from Dénes Balatoni: 422b0d2a, 32937181.
We could not reach him, so commits f34e1a0d and 18905298 remove his
additions. It still leaves the demux_control() declaration itself, but
we don't consider it copyrightable. It's basically an idiom that existed
in MPlayer before that change, applied to the demuxer struct. (We even
went as far as making sure to remove all DEMUXER_CTRLs the original
author added.)
Commit be54f481 might be a bit of a corner case, but this was rewritten,
and we consider the old copyright removed long ago.
Similar purpose as f34e1a0dee.
Somehow this is much more natural too, and needs less code.
This breaks runtime updates to duration. This could easily be fixed, but
no important demuxer does this anyway. Only demux_raw and demux_disc
might (the latter for BD/DVD). For the latter it might actually have
some importance when changing titles at runtime (I guess?), but guess
what, I don't care.
While we could easily ifdef-out this file for a LGPL core, it's still
annoying, and also the only GPL file remaining in player/ that is not
based on mplayer.c.
This file originates from subreader.c. It's not clear whether the
original author of it gave us permission to relicense to LGPL (he
probably did, but without further clarification it's sort of ambiguous),
but the subtitle file search code was written by other authors anyway
(see 7eef93819f).
One contribution (574eb892ea) is a bit of a corner case, as
test_ext_list() now does a bstrcasecmp(). But I don't think the
copyright remains here. (I asked the author anyway, just in case. But
I didn't wait for the answer.)
In some other cases, contributors who could not be reached added some
subtitle extensions. I don't think those are copyrightable on their own,
but I dropped them anyway just to be sure.
This is more uniform, and potentially gets rid of some past copyrights.
It might be that this subtly changes caching behavior (it seems before
this, it synced to the demuxer if the length was unknown, which is not
what we want.)
All relevant authors have agreed.
There are two exceptions, patches by authors who could not be reached.
This commit tries to remove their copyright.
a0f08fbe: messes with the seeking code corner cases. The EOF flag logic
was changed at some point, and always had a flaky history (see e.g.
347cf97250274ca370411f275999efb90d5e6084ff08d0c32e2f77e3de5566f09554a844, all which happened after that patch, MPlayer ones without that
patch). I claim that all of the copyright the patch might have added is
gone. Except the message in stream_seek(), which this commit removes.
The other code removed/changed in stream_seek() is probably not from
that patch, but it doesn't hurt to be sure, and also makes it more
readable. (It might change the behavior so that sometimes the eof flag
is set after a seek, but it doesn't matter here.)
2aa6acd9: it looks like the seek_forward() modified by this patch was
later moved to stream.c and renamed to stream_skip_read() in a790f2133.
(Looking closer at it, it was actually modified again a bunch of times,
fixing the logic.) I rewrote it in this commit. The code ended up rather
similar, which probably could lead to doubts whether this was done
properly, but I guess the reader of this will just have to believe me. I
knew what stream_skip_read() was supposed to do (which was reinforced
when I tried to replace it on the caller side), without reading the
pre-existing code in detail. I had to "relearn" the logic how buf_pos
and bug_len work - it was actually easy to see from stream_read_char()
how to skip the data, essentially by generalizing its logic from 1 byte
to N bytes. From the old code I only "used" the fact that it's obviously
a while(len>0) look, that has to call stream_fill_buffer repeatedly to
make progress. At first I actually didn't use stream_fill_buffer_by(),
but the variant without _by, but readded it when I checked why the old
code used it (see cd7ec016e7). This has to be good enough. In the end,
it's hard to argue that this could be implemented in a way not using
such a loop.
Other than this, I could add the usual remarks about how this code was
not modularized in the past, and how stream.c contained DVD code, and
how this was later modularized, moving the copyright to other files, and
so on. Also, if someone wrote a stream module, and was not asked about
LGPL relicensing, we don't consider the entry in stream_list[]
copyrightable.
cehoyos adds the step_property command in 7a71da01d, and it could be
argued that copyright of this still applies to the later add/cycle
commands (a668ae0ff9). While I'm not sure if this is really the case,
stay conservative for now and mark these commands as GPL-only. Mark the
command.c code too, although that is not being relicensed yet.
I'm leaving the MP_CMD_* enum items, as they are obviously different.
In commit 116ca0c768, "veal" (essentially an anonymous author) adds an
"osd_show_property_text" command (well, the commit message says "based
on" that person's code, so it's not clear how much is from him or from
albeu, who agreed to LGPL). This was later merged again with the
"osd_show_text" command, and then all original code was removed in
commit 58cc0f637f, so I claim that no copyright applies anymore. (Though
technically the input.conf addition still might be copyrighted, so I'm
just dropping it to get rid of the thought.)
"kiriuja" added 2f376d1b39 (sub_load etc.) and be54f4813 (switch_audio).
The latter is gone. I would argue that the former is fully rewritten
with commits b7052b431c and 0f155921b0. But like in the step_property
case, I will be overly conservative for now, and mark them as GPL-only,
as this is potentially shaky and should be thought through first. (Not
bothering with the command define/enum in the header, as it will be
unused in LGPL mode anyway.)
keycodes.c/h can be GPL, except for commit 2b1f95dcc2, which is a
patch by someone who wasn't asked yet. Before doing something radical, I
will wait for a reply.
Choosing the seek direction for MPSEEK_FACTOR based on the location of
seek_pts is nonsense, and can cause the seek position to oscillate
between adjacent keyframes, such as when dragging the OSC bar on short
videos.
Fix this by always seeking backward for type MPSEEK_FACTOR, i.e. seek
to the keyframe for the group of pictures (GOP) in which seek_pts is
located.
Fixes#4183.
Signed-off-by: wm4 <wm4@nowhere>
Moves the DXLockObjectsNV call to after PresentEx. This fixes an issue
where the presented image is a single frame late. This may be due to
DXLockObjectsNV locking the render target before StretchRect is done.
The spec indicates that the lock call should provide synchronization
for the resource, so this may be due to a driver bug.
The printout of available modes that you can get with --drm-mode=-1
(with -vo drm or --opengl-backend=drm) does not include the refresh
rate in the printout, which is quite useful to know, if one is to
choose for instance 23.98, or 24 Hz for film material.
Signed-off-by: wm4 <wm4@nowhere>
This preserves channel balance better and helps reduce discoloration due
to nonlinear tone mapping.
I wasn't sure whether to stuff this inside pass_color_manage or
pass_tone_map but decided for the former because adding the extra
mp_csp_prim would have made the signature of the latter longer than
80col, and also because the `mp_get_cms_matrix` below it basically does
the same thing anyway, so it doesn't look that out of place. Also why is
this justification longer than the actual description of the algorithm
and what it's good for?
This prevents nasty surprises like the sig-peak still being left at 1.0
when reinterpreting SDR as HDR, or the OOTF for HLG being left as
display-referred.
This introduces (yet another..) mp_colorspace members, an enum `light`
(for lack of a better name) which basically tells us whether we're
dealing with scene-referred or display-referred light, but also a bit
more metadata (in which way is the scene-referred light expected to be
mapped to the display?).
The addition of this parameter accomplishes two goals:
1. Allows us to actually support HLG more-or-less correctly[1]
2. Allows people playing back direct “camera” content (e.g. v-log or
s-log2) to treat it as scene-referred instead of display-referred
[1] Even better would be to use the display-referred OOTF instead of the
idealized OOTF, but this would require either native HLG support in
LittleCMS (unlikely) or more communication between lcms.c and
video_shaders.c than I'm remotely comfortable with
That being said, in principle we could switch our usage of the BT.1886
EOTF to the BT.709 OETF instead and treat BT.709 content as being
scene-referred under application of the 709+1886 OOTF; which moves that
particular conversion from the 3dlut to the shader code; but also allows
a) users like UliZappe to turn it off and b) supporting the full HLG
OOTF in the same framework. But I think I prefer things as they are
right now.
st2084 and std-b67 are really weird names for PQ and HLG, which is what
everybody else (including e.g. the ITU-R) calls them. Follow their
example.
I decided against naming them bt2020-pq and bt2020-hlg because it's not
necessary in this case. The standard name is only used for the other
colorspaces etc. because those literally have no other names.
MaxCLL is the more authoritative source for the metadata we are
interested in. The use of mastering metadata is sort of a hack anyway,
since there's no clearly-defined relationship between the mastering peak
brightness and the actual content. (Unlike MaxCLL, which is an explicit
relationship)
Also move the parameter fixing to `fix_image_params`
I don't know if the avutil check is strictly necessary but I've included
it anyway to be on the safe side.
List of changes:
1. Kill nom_peak, since it's a pointless non-field that stores nothing
of value and is _always_ derived from ref_white anyway.
2. Kill ref_white/--target-brightness, because the only case it really
existed for (PQ) actually doesn't need to be this general: According
to ITU-R BT.2100, PQ *always* assumes a reference monitor with a
white point of 100 cd/m².
3. Improve documentation and comments surrounding this stuff.
4. Clean up some of the code in general. Move stuff where it belongs.
"Almost" because this might contain copyright by michael, who agreed
with LGPL, but only once the core is LGPL. This is preparation for that
to happen.
Apart from that, the usual remarks apply. In particular, dec_video.c
started out quite chaotic with no modularization, but was later
basically gutted, and in general rewritten a bunch of times. Not going
to give a history lesson.
Special attention needs to be given to 3 patches by cehosos, who did not
agree to the relicensing:
240b743ebd: --field-dominance
e32cbbf7dc: reinit VO if aspect ratio changes
306f6243fd: use container aspect if codec aspect unset (?)
The first patch is pretty clearly still in the current code, and needs
to be disabled for LGPL.
The functionality of the second patch is still active, but implemented
completely different, and as part of general frame parameter changes (at
the time of the patch, MPlayer already reinitialized the VO on frame
size and pixel format changes - all this was merged into a single check
for changing image parameters).
The third patch makes me a bit more uncomfortable. It appears the code
was moved to dec_video.c in de68b8f23c, and further changed in
82f0d373, 0a0bb905, and bf13bd0d. You could claim that cehoyos'
copyright still sticks. Fortunately, we implement alternative aspect
detection, which is simpler and probably preferable, and which arguably
contains none of the original code and logic, and thus should be fully
safe.
While I don't know if cehoyos' copyright actually still applies, I'm
more comfortable with making the code GPL-only for now. Also change the
default to use the (in future) plain LGPL code, and deprecate the one
associated with the GPL code, so we can eventually remove the GPL code.
But it's also possible we decide that the copyright doesn't apply, and
undo the deprecation and GPL guards.
I expect that users won't notice anything. If you ask me, the old aspect
method was probably an accidental bug instead of intentional behavior.
Although, the new aspect method was broken too, so I had to fix it.
image_writer.c has code originating from vf_screenshot.c, vo_jpeg.c, and
potentially others. vo_image.c is based on a bunch of those VOs as well,
and the intention was to replace them with a single codebase.
vo_tga.c was written by someone who was not or not could be contacted,
but it doesn't matter anyway, as no code from that initial patch was
used.
One rather old patch (57f77bb41a) reordered by libjpeg patch API calls,
and the author of the patch was not contacted. But at least with the
smoothing_factor override removed, this pretty much exactly corresponds
to the official libjpeg API example (and might even reflect a change to
those - didn't dig deeper). This removes the -jpeg-smooth option. While
we're at it, remove all the other dropped jpeg options from the manpage
(which was forgotten in past changes).
The problem with fmt-conversion.h is that "lucabe", who disagreed with
LGPL, originally wrote it. But it was actually rewritten by "reimar"
later. The original switch statement was replaced with a lookup table.
No code other than the imgfmt2pixfmt() function signature survives.
Neither the format pairs (PIXFMT<->IMGFMT), nor the concept of mapping
them, can be copyrighted.
So changing the license should be fine, because reimar and all other
authors involved with the new code agreed to LGPL.
We also don't consider format pairs added later as copyrightable.
(The direct-mapping idea mentioned in the "Copyright" file seems
attractive, and I might implement in later anyway.)
Likewise, there might be some format names added to img_format.h, which
are not covered by relicensing agreements. These all affect "later"
additions, and they follow either the FFmpeg PIXFMT naming or some other
pre-existing logic, so this should be fine.
This file is an leftover from when img_format.h was changed from using
the ancient FourCCs (based on Microsoft multimedia conventions) for
pixel formats to a simple enum. The remaining cases still inherently
used FourCCs for whatever reasons.
Instead of worrying about residual copyrights in this file, just move it
into code we don't want to relicense (the ancient Linux TV code). We
have to fix some other code depending on it. For the most part, we just
replace the MP_FOURCC macro with libavutil's MKTAG (although the macro
definition is exactly the same). In demux_raw, we drop some pre-defined
FourCCs, but it's not like it matters. (Instead of
--demuxer-rawvideo-format use --demuxer-rawvideo-mp-format.)
It was an attempt to move some MPlayer filters (which were removed from
mpv) to external, loadable filters. That worked well, but then the
MPlayer filters were ported to libavfilter (independently), so they're
available again. Also there is a more widely supported and more advanced
loadable filter system supported by mpv: vapoursynth.
In conclusion, vf_dlopen is not useful anymore, confusing, and requires
quite a bit of code (and probably wouldn't survive the rewrite of the
mpv video filter chain, which has to come at some point). It has some
implicit dependencies on internal conventions, like possibly the format
names dropped in the previous commit.
We also deprecated it last release. Drop it.
It seems "lucabe" didn't actually write the current fmt-conversion.c/.h
code. He added the first version of the pixfmt mapping, which was later
changed into a table. So his agreement might not be required for
copyright purposes. Still, all those later additions of pixfmts by
various authors may or may not matter, so the situation is still
complex.
Quite chaotic history, which code being moved, refactored, duplicated,
unified a bunch of times. But I think everything is covered by LGPL
agreements.
In one case, cehoyos (who didn't agree) applied a patch by someone who
agreed, but didn't change anything (except weirdly adding German
translations). In another case, cehoyos moved code covered by LGPL
agreements (without changing it), which was later used for some other
code. We consider both cases not relevant for copyright.
win_state.c/.h is similar, but pending for reply by the author of
2ab259e68 (I guess).
This file didn't have a license in the first place. The fact that this
file was supposed to be a template, to be copied and modified by
individual users, might weaken the assumption that it's GPL. (It was
only later that mpv replaced the duplicate code in input.c with
input.conf essentially.)
All involved authors agreed to LGPL. On exception is an anonymous
contribution in commit 116ca0c768. This "veal" could not be found.
So the I key is noted as exception. input.conf does not support
conditional guards, so I'm not sure what to do here. Either we could
argue it's a joint work, or the fact that the I key won't work anyway
with a LGPL mpv might count.
etc/builtin.conf and etc/encoding-profiles.conf are mpv original things,
written by developers who agreed to LGPL. So mark them as LGPL too.
Surprisingly long history, but it's covered by LGPL agreements. One
exception is a7fc969ff6: someone who hasn't asked changes the
copyright year, but that change was obviously overwritten again later.
In GLES 2 mode, we can do dither, but "fruit" dithering is still out of
the question, because it does not support any high depth textures.
(Actually we probably could use an 8 bit texture too for this, at least
with small matrix sizes, but it's still too much of a pain to convert
the data, so why bother.)
This is actually a regression; before this, forcibly enabling dumb mode
due to low GL caps actually happened to avoid this case.
Fixes#4519.
The option->property bridge can't (and shouldn't) preserve option flags.
This is a problem if the flags are actually used by the option
implementation, beyond calling m_config_mark_co_flags().
This was true so far, but b8193e4071 changed this. Now setting the
--profile option (usually from a config file or as recursive profile)
can have side-effects that depend on the flags contents. Solve this by
avoiding going through the "double bridge" altogether.
This fixes a regression if an auto-profile is active, and the user
specifies an option on the command line that is supposed to override an
item in a profile recursively referenced by the auto-profile. The
command line option will not override it, because the auto-profile is
set later, and during application of the auto-profile, the
M_SETOPT_PRESERVE_CMDLINE flag gets lost.
Having to add something to m_property is not nice, and I'll probbaly
regret later. On the other hand, there is a chance that this helps
towards true option/property unification.
Since michael was somewhat involved in it, wait with the actual license
change until the core is relicensed. Thus mark it as "Almost LGPL.".
The worrisome part about mp_image.c is that it was created by cehoyos
(which disagreed with LGPL) in commit f2dee327b2. But it turns out it
was a patch by someone else (who agreed with LGPL).
For some reason, the patch was actually slightly modified by cehoyos for
no reason (messed with the include statements), so we mess them back,
just to be sure.
Other than this, there were some commits that added support for new
IMGFMTs over the years. Some of these were by people we didn't ask or we
didn't get permission from. But since the original mp_image code was
replaced by more generic code using FFmpeg pixdesc, none of these
changes are left anyway.
One additional change by cehoyos (115bfb9762) has been removed as well
(when "direct rendering" was dropped from the filter chain).
All authors agreed.
The author of 1ee8ce75 did not respond, but it was a mpv pull request,
and at this time DOCS/contribute.md and the "Copyright" file stated that
all contributions must include LGPL relicensing permission. But you
could claim that this was too "hidden". Sort of a corner case, I guess,
but not my problem.
Since this demuxer is based on code by michael, this file can become
LGPL only once the mpv core becomes LGPL, and this is preparation for
it.
There were quite a lot of changes for rearranging preferred libavformat
vs. internal MPlayer demuxers, codec mappings, and filename extensions,
but all this got removed, so some of the relevant authors weren't asked.
cehoyos, who disagreed with LGPL, made a few changes in the past (mostly
codec mapping and deinterlacing related things), but all of them were
removed, mostly due to libavformat API cleanups.
adland, who could not be reached, did commit 057916ee65, but it's easy
to essentially revert the change (this is what the source changes in
this commit do), so we don't need to think about it.
Chris Welton, who could not be reached, made a simple change in commit
958c41d9b6. Fortunately, the API changed again, and his changes were
removed, so we don't need to think about this either.
There is an anonymous contribution in commit 085f35f4b4 - since this
did not introduce any original code, and the probe code was heavily
rewritten multiple times, I don't consider it relevant.
Don't use __thread, which requires heavy runtime in some cases (such as
MinGW-w64, at least under some configurations, forcing you to link to
its pthread runtime DLL).
The pthread_t struct was needed over a simple thread ID, because
pthread_join() needed to access some sort of context from pthread_t.
Further, pthread_exit() and pthread_detach() need the context of the
current thread, for which we relied on TLS.
Replace these uses by a global thread array. This includes all threads
created by the thread wrapper. Hopefully the number of threads created
by mpv is low (say, below 20), and threads are not that often created or
destroyed. So just keeping them in an array with linear search lookup
should be reasonable.
iive agreed only to LGPL 3.0+ only. All of his relevant changes are for
XvMC, for which mpv completely dropped support back in mplayer2 times.
But you could claim that the get_format code represents some residual
copyright (everything else added by iive was removed, only get_format
still is around in some form). While I doubt that this is relly
copyright-relevant, consider it is for now.
michael is the original author of vd_lavc.c, so this file can become
LGPL only after the core becomes LGPL.
cehoyos did not agree with the LGPL relicensing, but all of his code is
gone.
Some others could not be reached, but their code is gone as well. In
particular, vdpau support, which was originally done by Nvidia, had
larger impact on vd_lavc.c, but vdpau support was first refactored a few
times (for the purpose of modularization) and moved to different files,
and then decoding was completely moved to libavcodec.
Lastly, assigning the "opaque" field was moved by Gwenole Beauchesne in
commit 8e5edec13e. Agreement is pending (due to copyright apparently
owned by the author's employer). So just undo the change, so we don't
have to think about whether the change is copyrightable.
Before this, options with co->data==NULL (i.e. no storage) were not
added to the bridge (except alias options). There are a few options
which might make sense to allow via the bridge ("profile" and
"include"). So allow them.
In command_init(), we merely remove the co->data check, the rest of the
diff is due to switching the if/else branches for convenience.
We also must explicitly error on M_PROPERTY_GET if co->data==NULL. All
other cases check it in some way.
Explicitly exclude options from the property bridge, which would be
added due this, and the result would be pointless.
Certain options, such as --profile, --help, and many others require
special-handling, because they don't fit conceptually into the option
and property model. They don't store data, but perform actions.
This caused the situation that profiles could not be set when using
libmpv in encoding mode (although you should probably not used libmpv in
encoding mode). Using libmpv always ends up in calling
m_config_set_option_raw_direct(), while --profile was handled in
m_config_parse_option().
Solve this by moving the handling of this from m_config_parse_option()
to m_config_set_option_raw_direct(). Actually we just stuff most of this
into m_config_handle_special_options(), which is only called by the
aforementioned function.
Strangely this also means that the --h/--help option declarations need
to be changed, because they used OPT_PRINT, and now the option "parser"
is always invoked before the special code. Thus, make them a string.
Them being OPT_PRINT was apparently always redundant. (The other option
declarations are moved for cosmetic purposes only.)
The most weird change is how co->data==NULL is handled. We now allow
passing down involved options to m_config_set_option_raw_direct(). The
thing is that we don't want them to error if the command line parser is
using them (with special handling done there), while all other code
paths should raise an error. We try using M_SETOPT_FROM_CMDLINE to
distinguish these cases.
Note that normal libmpv users are supposed to use the "apply-profile"
command instead.
This probably contains a bunch of bugs, which you should report.
All relevant authors of the current code have agreed.
As always, there are the usual historical artifacts that could be
mentioned. For example, there used to be a large number of decoders
by various authors who were not asked, but whose code was all 100%
removed. (Mostly due to FFmpeg providing all codecs.)
One point of contention is that Nick Kurshev might have refactored the
old audio decoder code in 2001. Basically, there are hints that it might
have been done by him, such as Arpi's commit message stating that the
code was imported from MPlayerXP (Nick's fork), or all the files having
his name in the "maintainer" field. On the other hand, the murky history
of ad.h weakens this - it could be that Arpi started this work, and Nick
took it (and possibly finished it).
In any case, Nick could not be reached, so there is no agreement for
LGPL relicensing from him. We're changing the license anyway, and assume
that his change in itself is not copyrightable. He only moved code, and
in addition used the equivalent video decoder framework (done by Arpi,
who agreed) as template. For example, ad_functions_s was basically
vd_functions_s, which the signature of the decode callback changed to
the same as audio_decode(). ad_functions_s also had a comment that said
it interfaces with "video decoder drivers" (I'm fixing this comment in
this commit).
I verified that no additional code was added that is copyright-relevant,
still in today's code, and not copied from the existing code at the time
(either from the previous audio decoder code or the video framework
code). What apparently matters here is that none of the old code was not
written by Nick, and the authors of the old code have given his
agreement, and (probably) that Nick didn't add actual new code (none
that would have survived), that was not trivially based on the old one
(i.e. no new copyrightable "work").
A copyright expert told me that this kind of change can be considered
not relevant for copyright, so here we go.
Rewriting this would end with the same code anyway, and the naming
conventions can't be copyrighted.
All authors of the current code have agreed.
The code probably originates from a software named GySmail (as the
copyright header indicates). As far as I can tell, it was written by
Arpi (who has agreed), possibly with unknown co-authors. This is most
likely OK, as none of the original code is around anymore anyway. I
could not find a working download of GySmail, that actually contained
the original getch2.c code.
This also has a wild history of random people adding ifdef guards to
control ioctl() vs. tcgetattr() calls. (See for example 2b1310abba4c1.)
Later, the ioctl() was removed in favor of the POSIX tcgetattr(), and
the ifdeffery was removed. So these people were not contacted.
Implements JS with almost identical API to the Lua support.
Key differences from Lua:
- The global mp, mp.msg and mp.utils are always available.
- Instead of returning x, error, return x and expose mp.last_error().
- Timers are JS standard set/clear Timeout/Interval.
- Supports CommonJS modules/require.
- Added at mp.utils: getenv, read_file, write_file and few more.
- Global print and dump (expand objects) functions.
- mp.options currently not supported.
See DOCS/man/javascript.rst for more details.
Not all tools apply line breaking. Which is probably good, because you
wouldn't be able to put lines in there which should _not_ be broken.
Don't ask me whether there is an "official" git convention for this.
Sometime earlier, "sub-ass-style-override" was renamed to
"sub-ass-override". The option's documentation was updated to support
this, but not the documentation for the hotkey that toggles this option.
This commit updates the keyboard shortcut documentation to fix that.
Signed-off-by: wm4 <wm4@nowhere>
The original functions come from 24c6f11c8b, which says that these
functions were copied from another project. This other project is GPL
and was written by an unknown author, so there is no hope to relicense
them to LGPL.
Replace the existing functions with code written by Avi Halachmi. He did
not see the old code, but wrote it based on the function signature and
an extended description of what they should do (http://sprunge.us/edia).
Some additional help was provided by me (in particular the function of
the "ok" parameter and how to implement it - not in the original
ASFRecorder code).
Some of the code is hilariously similar, but these are coincidences. The
name of the variable "c" probably "leaked" from me, but "o" is a true
coincidence.
The code was integrated by me - my only change is changing the function
names to the old ones, moving the order of the top-level declarations,
and changing "default_ok" to "url_default_ok", and changing the strings
from char* to char[].
The author of the new code is Avi Halachmi.
This switches back the --demuxer-lavf-probe-info default for HLS from
"no" to "yes".
Apparently the old default caused problems with the FFmpeg MediaCodec
wrapper. I'm not sure whether it's due to the extradata (which would not
make any sense as MediaCodec takes in Annex B formatted h264 data), or
something else. Reportedly, enabling probing fixes it though, so enable
it again.
Add disparaging comment about Google software/APIs here.
All authors of the current code have agreed (as far as this commit
requires).
options.c/options.h will take more effort, because it contains all the
option declarations, and thus is touched extremely often.
m_option.c is technically still GPL, because of commit 2c82d5a1d8
(michael has agreed to LGPL, but only once the core of mpv is LGPL).
The geometry parsing code in m_option.c was originally by someone who
could not be reached. However, it was heavily rewritten anyway, and only
the syntax remains (i.e. not copyright-relevant).
parse_commandline.c contains a change by "adland" (commit 1d0ac71ae8),
who could not be reached - this this specific part is GPL only.
Fortunately, it matters only for DVD (and even then is more like a hack,
but whatever).
There are some other relevant changes, but they have all been reverted,
moved somewhere else, deleted, or replaced.
All authors have agreed.
mpv.exe.manifest probably can't have a copyright header, so it doesn't.
These files don't add license info to the executables. And of course the
executable license is still GPL.
The history goes back to 2001 or so, but everyone involved with still
existing code has agreed.
One person who could not be reached yet (elevengu) has changes in this,
which as far as I can tell were overwritten anyway at a later point.
I call it `mobius` because apparently the form f(x) = (cx+a)/(dx+b) is
called a Möbius transform, which is the algorithm this is based on. In
the extremes it becomes `reinhard` (param=0.0 and `clip` (param=1.0),
smoothly transitioning between the two depending on the parameter.
This is a useful tone mapping algorithm since the tunable mobius
transform allows the user to decide the trade-off between color accuracy
and detail preservation on a continuous scale. The default of 0.3 is
already far more accurate than `reinhard` while also being reasonably
good at preserving highlights, without suffering from the overall
brightness drop and color distortion of `hable`.
For these reasons, make this the new default. Also expand and improve
the documentation for these tone mapping functions.
Unfortunately quite a mess, in particular due to the need to have some
compatibility with the old API. (The old API will be supported only in
short term.)
When the drm video output is used under VT with a terminal multiplexer
like screen, the VT_SETMODE ioctl call will fail since the controlling
terminal is a pseudoterminal instead of a real one, thus the VT switcher
will be unavailable.
The problem is, the wait_events function inside vo_drm.c will test for
this, and will do nothing if the switcher is not active. Normally, this
would not be noticed, however, when you pause a video, or if you're playing
multiple image files, mpv will suddenly start busy waiting on a single
core.
I confirmed this by building mpv with gprof support, in a few seconds,
wait_events got called about 90 million times.
So I added a fallback, when the VT switcher is not availble, just use the
vo_wait_default function. I tested it and it's working well so far.
There's probably no reason to keep this disabled. The -rdynamic (and the
approach we use) is probably a bit scary, but should not break anything.
Just to be sure I'm hard-disabling this on win32 anyway. We know it
can't work there in its current form.
Fixes#4491.
This affects in particular the heuristic that enables byte seeks in some
cases with .ts input. --demuxer-lavf-hacks=no should disable this
behavior now.
List of changes:
1. Rename `signfs` to `scale`, to better match what it actually does
(force --sub-scale to apply to ASS subtitles), and fix the blatantly
wrong documentation (it actually specifically does *not* apply to
signs)
2. Rename `--sub-ass-style-override` to `--sub-ass-override` to help
reduce confusion between it and `--sub-ass-force-style`, as well as
pointing out that it doesn't necessarily actually override styles.
(The new `scale` option, for example, only sets
ASS_OVERRIDE_BIT_FONT_SIZE, but not ASS_OVERRIDE_BIT_STYLE)
3. Mention that `--sub-ass-override` is generally sort of smart about
only overriding dialog, not signs.
Usually a good idea to do this when encoding to mp4, but it's
commented since usefulness is arguable nowadays.
Equivalent to running qt-faststart tool on the resulting mp4.
Adds a bit of delay at the end of encoding.
In the previous commit, I claimed that this GUID stuff was a libavformat
extension, but that seems to be completely wrong. (LATM might be an
extension of some kind, though.)
I don't know what Microsoft calls this GUID "suffix" though. It's
generally used to wrap wav format tags and video FourCCs as GUIDs.
I guess you could grep Microsoft headers for it to find its name,
or something.
Indeed, FFmpeg found a way to maximize the misery around VfW/AVI-style
muxing. It appears it can mux a number of random codecs by using random
format tags. To make this even more stranger, it has a probably custom
GUID for signaling them, although for unknown reasons this is done only
"sometimes" (judging from FFmpeg's riffenc.c).
Whatever, it's not too hard to support it. Also apparently fix the
incorrect interpretation of extended formats - there's absolutely no
reason to assume they're always PCM. Instead, check for the correct
GUIDs. Also while we're at it, move the channel mask handling also to
codec_tag.c, so all WAVEFORMATEXTENSIBLE handling is in one place. (With
the normal wav header handling strangely still in demux_mkv.c.)
The case I was looking at (aac_latm muxing) decodes now. While I'm not
entirely sure about its correctness (libavformat has a weird
special-case for SBR), it certainly doesn't try to play it as PCM,
which is much of an improvement.
The extradata mess in the demux_mkv.c A_MS/ACM code path is unfortunate
and ugly, but has less impact than refactoring all the code to make
this specific case nicer.
Did I mention yet that I hate VfW-style mkv muxing?
In a multi GPU scenario, it may be desirable to use different GPUs
for decode and display responsibilities. For example, if a secondary
GPU has better video decoding capabilities.
In such a scenario, we need to initialise a separate context for each
GPU, and use the display context in hwdec_cuda, while passing the
decode context to avcodec.
Once that's done, the actually hand-off between the two GPUs is
transparent to us (It happens during the cuMemcpy2D operation which
copies the decoded frame from a cuda buffer to the OpenGL texture).
In the end, the bulk of the work is around introducing a new
configuration option to specify the decode device.
Add "or URLs" to the default OSD message when mpv is launched without parameters.
Since this works flawlessly with youtube-dl integration, the fact that you can drop URLs directly to the window should be advertised more.
The new API has literally no advantages (other than that we can drop
mp_vt_download_image and other things later), but it's sort-of uniform
with the other hwaccels.
"--videotoolbox-format=no" is not supported with the new API, because it
doesn't "fit in". Probably could be added later again.
The iOS code change is untested (no way to test).
It's not really guaranteed that other components always set this (e.g.
on subtle errors), so check it explicitly. Although I'm not aware of a
failing case.
If --log-file was used in config files, this could be missing due to the
exact timing when the messages are print, and when the options are
applied. Fix this by always dumping the version again when a log file is
opened.
All relevant authors have agreed to the relicensing.
Problem cases:
eca47b1a5e: someone else gets credited for the "idea" of this change,
but it doesn't seem like it was a patch (otherwise reimar would have
said "patch"). Also, the associated code got essentially removed again
anyway. (The option parsing was rewritten fully.)
ffb529e4eb: anonymous/unknown author, but the code was fully removed
anyway. The struct was removed, and the modern code does explicit
read/write calls.
40789473d2: author was not contacted, but this code was removed
anyway. The magic number (0x7ffff000) is still in the new code, but I
don't think that is copyright relevant.
c750b8ab2d: the message was entirely removed.
All contributors of the current code have agreed. ao.c requires a
"driver" entry for each audio output - we assume that if someone who
didn't agree to LGPL added a line, it's fine for ao.c to be LGPL
anyway. If the affected audio output is not disabled at compilation
time, the resulting binary will be GPL anyway, and ootherwise the
code is not included.
The audio output code itself was inspired or partially copied from
libao in 7a2eec4b59 (thus why MPlayer's audio code is named libao2).
Just to be sure we got permission from Aaron Holtzman, Jack Moffitt, and
Stan Seibert, who according to libao's SVN history and README are the
initial author. (Something similar was done for libvo, although the
commit relicensing it forgot to mention it.)
242aa6ebd4: anders mostly disagreed with the LGPL relicensing, but we
got permission for this particular commit.
0ef8e55573: nick could not be reached, but the include statement was
removed again anyway.
879e05a7c1: iive agreed to LGPL v3+ only, but this line of code was
removed anyway, so ao_null.c can be LGPL v2.1+.
9dd8f241ac: patch author could not be reached, but the corresponding
code (old slave mode interface) was completely removed later.
when quitting mpv during the System fullscreen animation cocoa can't
reset some flags properly and won't reset the Dock hiding behaviour
to it's previous state.
Fixes#4400
If vo_opengl is used, and vo_opengl already created the vdpau interop
(for whatever reasons), and then preemption happens, and then you try to
enable hw decoding, it failed. The reason was that preemption recovery
is not run at any point before libavcodec accesses the vdpau device.
The actual impact was that with libmpv + opengl-cb use, hardware
decoding was permanently broken after display mode switching (something
that caused the display to get preempted at least with older drivers).
With mpv CLI, you can for example enable hw decoding during playback,
then disable it, VT switch to console, switch back to X, and try to
enable hw decoding again.
This is mostly because libav* does not deal with preemption, and NVIDIA
driver preemption behavior being horrible garbage. In addition to being
misdesigned API, the preemption callback is not called before you try to
access vdpau API, and then only with _some_ accesses.
In summary, the preemption callback was never called, neither before nor
after libavcodec tried to init the decoder. So we have to get
mp_vdpau_handle_preemption() called before libavcodec accesses it. This
in turn will do a dummy API access which usually triggers the preemption
callback immediately (with NVIDIA's drivers).
In addition, we have to update the AVHWDeviceContext's device. In theory
it could change (in practice it usually seems to use handle "0").
Creating a new device would cause chaos, as we don't have a concept of
switching the device context on the fly. So we simply update it
directly. I'm fairly sure this violates the libav* API, but it's the
best we can do.
Windows, as of the Creators Update, finally has a sane API for giving a
name to a thread that can be used by debuggers. This is similar to
pthread_setname_np on Linux and some Unixes. Expose it in the pthread
wrapper and use it for mpthread_set_name().
This was broken in e0250b9604. In some cases, device creation will
succeed, but creating an EGL context on the device will fail. With
--angle-renderer=auto, it should try to create the context again on a
D3D9 device.
This fixes mpv in Windows Vista on VirtualBox for me.
This was added in 3f268cc4f2 because it wasn't clear whether
WM_NCCREATE could be used to send a context pointer from CreateWindowEx
to the window procedure. WM_NCCREATE isn't always the first message sent
to a window, but this seems to be because of an undocumented but
well-known bug where, for top-level overlapped windows, a spurious
WM_GETMINMAXINFO arrives first instead. The WM_GETMINMAXINFO can be
safely ignored, so it is still okay to pass the context struct in
WM_NCCREATE.
Try to read header elements stored at the end of the file in the order
of their position. (It would be nicer if mkv simply told us a range of
elements to parse, but it doesn't do that.)
This can potentially reduce seek elements, although I didn't check if
any real files trigger this. The real contribution by this change is
that it does not defer reading the CUE index if we need to seek to the
end of the file anyway. This can actually avoid 2 seeks when opening a
file and --start is used, and the file has other headers elements at the
end of the file (like tags).
Commit 374600cec0 ("cache: propagate seek failures") changed
stream-level seeks to be done in the calling thread so possible errors
could be reported. This commit included some rationale why doing the
stream-level seeks synchronously was not a big issue. However, the
following fixup commit f4d62dc4a0 changed the seek code to always
synchronize with the cache thread and do seek handling there. This is
a problem because it affects even seeks within already cached data
(which require no stream-level seek). With a network server that sends
data in bursts, the cache thread can be blocked in a read call for a
long time; the added synchronization means that seeking within already
downloaded data can have unnecessary long delays.
Change cache_seek() to check whether the seek is expected to result in
a stream-level seek, and skip synchronization if it is not. This means
that seeks within the cached portion of the file now again happen
immediately without possibly waiting for network.
Signed-off-by: wm4 <wm4@nowhere>
mpv's mouse button numbering is based on X11, which means XBUTTON1 and 2
on Windows (the "back" and "forward" buttons) should map to MOUSE_BTN7
and 8 in mpv. MOUSE_BTN5 and 6 refer to the horizontal scroll buttons on
mouses that have them.
Windows doesn't have a way to distinguish "precise" mouse wheel events
and events from regular notched mouse wheels. A notched wheel should
always send events with a delta of 120, but a precise wheel could also
happen to send 120 if multiple scroll events are coalesced (and to make
things even harder, some buggy Microsoft drivers send deltas less than
120, even for notched wheels.) Since there is no distinction, but
MP_AXIS_* keycodes can hold more information (the delta value,) send
MP_AXIS_* events for both kinds of mouse wheel scrolling.
This adds check_property_scalable, which returns true if the property is
backed by a floating-point number. When the add or cycle commands
operate on these properties, they can benefit from the fractional scale
value in cmd->scale. When the property is not backed by a floating-point
number, cmd->scale_units is used instead, so for axis events, the
property is only incrmented when the user scrolls one full unit.
This solution isn't perfect, because in some cases integer-backed
properties could benefit from accurate scrolling. For example, if an
axis is bound to "cycle audio 5", the cycle command could be made to
change the audio track by one when the user scrolls 1/5th of a unit,
though this behaviour would require more changes to the options system.
This adds some logic for pre-processing MP_AXIS_* events before the
corresponding input command is generated.
Firstly, the events are filtered. A lot of touchpad drivers and
operating systems don't seem to filter axis events, which makes it
difficult to use the verical axis (MP_AXIS_UP/MP_AXIS_DOWN) without
accidentally triggering commands bound to the horizontal axis
(MP_AXIS_LEFT/MP_AXIS_RIGHT) and vice-versa. To fix this, a small
deadzone is used. When one axis breaks out of the deadzone, events on
the other axis are ignored until the user stops scrolling (determined by
a timer.)
Secondly, the scale_units value is determined, which is the integer
number of "units" the user has scrolled, as opposed to scale, which is
the fractional number of units. It's determed by accumulating the
fractional scale values. If an axis is bound to a "non-scalable" command
that doesn't understand fractional units, interpret_key() will queue
that many commands, each with scale = 1.0.
Scalable commands (seek, cycle and add) understand the cmd->scale
parameter and will "scale" their action accordingly, for example, a seek
with scale = 0.5 will only seek half the specified amount and a seek
with scale = 2.0 will seek twice as much.
Mark these commands so in the next commit, input.c will be able to
synthesize input with cmd->scale = 1 for non-scalable commands.
TLS is a headache. We should avoid it if we can.
The involved mechanism is unfortunately entangled with the unfortunate
libmpv API for returning pointers to host API objects. This has to be
kept until we change the API somehow.
Practically untested out of pure laziness. I'm sure I'll get a bunch of
reports if it's broken.
Most authors have agreed. Like with vo.c, we don't take module
declarations into consideration (see 0e09533c73).
Notable issues:
115bfb9762: the author has (probably) not agreed. The vf.c changes were
removed with the removal of filter DR, though (see c54fc507da).
7b25afd742: the same author adds VOCTRLs for deinterlacing switching at
runtime. Put them under a HAVE_GPL ifdef just to be sure. (It looks like
we could remove the VOCTRLs immediately, as they're needed only for some
compatibility things, but no need to do that yet.)
02b199e5e9: the author had a conditional agreement to LGPL, which
doesn't allow us to change it just yet, but the code added here was
completely removed anyway. (These days, the pts is passed as mp_image
field, and put_image is gone.)
3532cd532e: same author, but code removed with DR removal.
f0626e2f8d: same author, but code was moved to mp_image.c.
e5b4b495c3: agreed to LGPLv3+ only, but the code was removed in
cfa1f9e082 anyway.
086c324692: author was not asked - minor warning fix, but no mpv
includes malloc.h anymore.
e9d0a1d609: author was not asked - removed again in 33b62af947.
c260a1139d: author could not be reached - but this code was removed when
mpv changed the image allocation code to essentially use FFmpeg's
pixdesc.
This case is a bit weird, because MPlayer certainly also has a file
named af_format.c. Both appear to have the function of converting audio
data between sample formats.
However, mpv's af_format.c is a rewrite, and doesn't actually do
conversion by itself. It's similar to vf_format.c, and forces the
generic filter chain code to insert conversion filters, instead of doing
conversion explicitly.
mpv's current af_format.c started out as af_force.c in d9582ad0a4. It
was renamed to af_format.c in e60b8f181d, while the old af_format.c was
split into two new filters. In 943c785619 the filename was changed to
af_format.c as well.
The new af_format.c does not contain any libaf code, except for some
potentially copy & pasted skeleton and boilerplate code. (We don't
account for this in per-filter file licenses, as the old libaf code
has to be removed fully, at which point the filters will have to be
ported to another framework, which will removed that boilerplate code.)
The old filters based on af_format.c were progressively replaced and
removed. Support for non-native endian and formats with signedness
different from native FFmpeg was completely removed in 831d7c3c40.
The old 24 bit conversion code was removed in 552dc0d564 (made
unnecessary by 5a9f817bfd).
Also list hwdec_vaglx.c as GPL-only, which doesn't have anything to do
with this commit.
It fails building with some older kernel headers, and the current test
does not auto-disable it in these cases.
Since DVB isn't going to be used by many people, I think disabling it by
default is reasonable.
It seems libsmbclient has been GPLv3 for years. Also, it's certainly not
LGPL (unlike some of its support libs like talloc). Thus, mpv built with
Samba support is GPLv3.
Disable it by default, so we don't have to go through the trouble to
indicate the correct license in our output, and we don't trick people
into distributing stuff under the wrong license.
This has a messy history all back to the initial commit with multiple
refactors, but it seems almost all authors agreed.
Exceptions:
2aa6acd974: patch by someone who could not be reached. Whether or not
this code is still in mpv is unknown, but the affected code was moved to
stream.c at one point anyway.
3859bbd9fe: not sure if this is a patch by the mentioned person (I
assume not) or the committer (who agreed to LGPL), but it seems the
change is too trivial to affect copyright. It seems even the FD check
can be dropped, which I'm doing in this commit.
58846451f0: author doesn't reply. But reverting this and letting
someone who has never seen this commit before redo it would lead to
exactly the same code. So I'm claiming that the change is not
copyrightable.
All authors have agreed.
One minor exception is 21a9221e7b (patch by someone who wasn't asked),
but we just remove the added line again. It seems unneeded.
Most contributors have agreed. vo.c requires a "driver" entry for each
video output - we assume that if someone who didn't agree to LGPL added
a line, it's fine for vo.c to be LGPL anyway. If the affected video
output is not disabled at compilation time, the resulting binary will be
GPL anyway.
One problem are the changes by Nick Kurshev (usually using "nick" as SVN
username). He could not be reached. I believe all changes to his files
are actually gone, but here is a detailed listing:
fa1d5742bc: nick introduces a new VO API. It was removed in 64bedd9683.
Some of this was replaced by VOCTRLs are introduced in 7c51652a1b,
obviously replacing at least some functionality by his API.
b587a3d642: nick adds a vo_tune_info_t struct. Removed in 64bedd9683
too.
9caad2c29a: nick adds some VOCTRLs, which were silently removed in
8cc5ba5ab8 (they became unused probably with the VIDIX removal).
340183b0e9: nick adds VO-based screenshots, which got removed in
2f4b840f62. Strangely the same name was introduced in 01cf896a2f again,
but this is a coincidence and worked differently (also it was removed
yet again in 2858232220).
104c125e6d: nick adds an option for "direct rendering". It was renamed
in 6403904ae9 and fully removed in e48b21dd87.
5ddd8e92a1: nick adds code to check the VO driver preinit arg to every
single VO driver. The argument itself and any possibly remaining code
associated with it was removed in 1f5ffe7d30.
f6878753fb: nick adds header inclusion guards. We assume this is not
relevant for copyright.
Some of nick's code was merely moved to other files, such as the
equalizer stuff added in 555c676683 and moved in 4db72f6a80 and
12579136ff, and don't affect copyright of these files anymore.
Other notes:
fef7b17c34: a patch by someone who wasn't asked for relicensing added a
symbol that was removed again in 1b09f4633.
4a8a46fafd: author probably didn't agree to LGPL, but the function
signature was changed later on anyway, and nothing of this is left.
7b25afd742: the same author adds a symbol to what is vo.h today, which
this relicensing commit removes, as it was unused. (It's not clear
whether the mere symbol is copyrightable, but no need to take a risk.)
3a406e94d7, 9dd8f241ac: slave mode things by someone who couldn't be
reached. This aspect of the old slave mode was completely removed.
bbeb54d80a: patch by someone who was not asked, but the added code was
completely removed again.
All authors of the current code have agreed.
For most of its life, MPlayer used Microsoft structs like WAVEFORMATEX
to describe media content. It appears these were copied from wine in
61c5a99851. Copyright is unclear, but mpv completely removed use of
these structs anyway. (demux_mkv.c still contains code to read these
fields from a byte stream, but the struct is fully gone.)
42f97b2b82: cehoyos (who probably didn't agree with LGPL) applied a
patch by someone who agreed. It's unknown whether cehoyos modified the
patch (and thus his copyright would apply), but the changed code was
removed anyway. (The code was first moved somewhere else, then removed.)
efd53eed61: the patch author was not asked. Although the mkv_sh_sub_t
struct was later moved to stheader.h, the added field was removed
without replacement.
f6878753fb: nick, who could not be reached, added an include guard, but
the guard was changed several times later, and it's probably not
copyrightable anyway.
afb0fd5ea1: the same nick adds a field that was later replaced and
finally removed again in 8cd6b20571.
All authors have agreed.
The initial commit d33703496c as well as the current code contain this
line:
* inspired by SoundTouch library by Olli Parviainen
We assume this is about the algorithm (not the code), and the author of
the original patch actually wrote all code himself.
All authors have agreed.
One exception is 71247a97b3, whose author was not asked, but we deem
the change as trivial. (And technically it was replaced when the audio
chain dropped non-native endian sample formats.)
All authors have agreed to the relicensing.
The code was pretty much rewritten by Stefano Pigozzi. Since the rewrite
happened incrementally, and seems to include refactored portions of
older code, this relicensing was done on the pre-refactor code do.
The original commit adding this AO (as ao_macosx.c) credits Timothy J.
Wood as original author. He was asked and agreed to LGPL. It's not
entirely sure from which project this code came from, but it's probably
libao. In that project, Stanley Seibert made some changes to it (who as
a major developer of libao was asked just to be sure), and also Ralph
Giles and Ben Hines made two small changes. The latter were not asked,
but none of their code survived anyway.
Or maybe it would be better to write "confirm" than "change".
The MP_SELECT_LE_BE macro definition has some similarity with some old
MPlayer definition, but it's different code with a different idea, so I
don't think it's affected by that.
The BYTE_ORDER etc. macro definitions are similar to those found in
various system headers (this code emulates the ones often found in
<sys/types.h>), but I don't think there is a copyright problem either.
This didn't have a header and this was implied LGPL, but this was not
entirely correct. It turns out the printf attribute code was leaked in
from talloc, which is "LGPL v3 or later". talloc was added to the
mplayer2 code base in 27a30e310e. This remaining code was an oversight.
Since we want to reduce LGPL v3 code, replace this code with the one
from ta/ta.h. This code was explicitly written newly to get rid of
talloc and its license in 0933f12d28.
All authors have agreed to the relicensing.
iive has insisted on "LGPL v3 or later", which makes the file LGPL v3.
His commits are the following: 84ec5775089b0d8c680f. All other
contributions are LGPL v2.1. I hope we can remove these changes
completely one day to make this file LGPL v2.1.
iive also authored commit 3934b160a8, but this code is completely gone
today. (fork() and shared memory use was removed completely in favor of
threads.)
All authors have agreed, with the following exceptions:
e68d7f6858: wight wasn't asked (I think...), but even if he modified the
patch he applied, all code added by it was removed again later.
cb7768f9bb: nick could not be reached, but the declarations he added as
well as the full timer.c file were deleted again in cff81fe498 and
f800a42e45 (did it really take 6 years to remove unused declarations?).
ffaf4af230: it looks like this person wasn't contacted, but the code
added was removed again in f544bcf105.
This comes with estimated level of difficulty. Files which were already
LGPL are listed too, to avoid potential confusion.
Some entries use shell wildcards.
All authors have agreed.
Commit 94d3170bd0 is a bit murky: Nick could not be reached, and arpi's
changes were obviously inspired or copied from Nick's. However, the
changed symbols were removed and do not exist anymore.
Although pretty similar to the probably unrelicensable
video/fmt-conversion.c/h (basically using the same idea, but for audio),
it was written by someone else. The format mapping was first added in
commit ad95e046c2.
msg.c is "partial" due to "michael", whose work can be changed to LGPL
only once the core is LGPL. It's explained in the Copyright file. I
prefer to do the relicensing incrementally (due to the overwhelming
workload). Changing the license before that happens would be legally
questionable, but nothing can stop us from essentially marking it as
"will be LGPL".
All authors have agreed to LGPL, with the following exceptions:
9df11ee8bf: the author (probably) didn't agree, but the line that is
added is later fully removed.
35e90f1556: was not asked, but all iconv code was 100% removed from the
mp_msg mechanism (we alwas require UTF-8 now).
4e4f3f806e: the change by michael.
50a86fcc34: the identify variable was move, and completely removed the
latest in commit 48bd03dd91.
1f6c494641: did not agree, but due to a major mp_msg change the added
line became unnecessary and was removed.
da63498bf9: was not reachable, but the MPlayer GUI is gone from mpv
anyway (also commit fc4d6e617d removed these specific additions a long
time ago).
I guess there is a hard to balance tradeoff between appearing rude or
dismissive, and making the user think it's ok to not provide essential
information.
The author of the old code disagreed with LGPL. The new code is a clean
room reimplementation by Niklas Haas. It lacks the clamping, but we
decided it doesn't matter.
Untested, bugs can be fixed later anyway.
Until now, the texture pointer was stored in plane 1, and the texture
array index was in plane 2. Move this down to plane 0 and plane 1. This
is to align it to the new WIP D3D11 decoding API in Libav, where we
decided that there is no reason to avoid setting plane 0, and that it
would be less weird to start at plane 0.
Sigh...
The functionality is not actually needed for vdpau, but if the vdpau
hwaccel is present, the FFmpeg version is new enough that it includes
the field.
These decoders can select the decoding device with hw_device_ctx, but
don't use hw_frames_ctx (at least not in a meaningful way).
Currently unused, but intended to be used for cuvid, as soon as it hits
ffmpeg git master.
Also make the vdpau and vaapi hwaccel definition structs static, as we
have removed the old code which would have had clashing external
declarations.
Update man page for fonts.conf and subfont.ttf. These are two
undocumented features in mpv. They were only hardcoded into sub/ass_mp.c
and could not be found anywhere else in the entire codebase. Git log
reveals that fonts.conf was added in 2013 while subfont.ttf was brought
in by a ancient patch of mplayer in 2002...
These are two quite useful undocumented features when you do not want to
mess up with global fonts.conf to include more fonts.
Also document ~/.config/mpv/fonts/ directory and suggest using fonts.conf
to include additional fonts.
mpv reads all files in ~/.config/mpv/fonts/ directory into memory. If
there are a lot of fonts in that directory, mpv would use a lot of
memory. Using ~/.config/mpv/fonts.conf to include additional fonts is
more memory-efficent.
This reverts commit 142b2f23d4, and replaces it with another try. The
previous attempt removed the overlay on every rendering, because the
normal rendering path actually unrefs the mp_image. Consequently,
unmap_current_image() was completely inappropriate for removing the
overlay.
If the default shell of the user is set to csh or tcsh, the use of
"$SHELL -l -c" will fail to launch mpv because -l and -c cannot be used
together with csh or tcsh.
Signed-off-by: Akemi <der.richter@gmx.de>
The new replaygain code accidentally applied the linear gain as cubic
volume level. Fix this by moving the computation of the volume scale out
of the af_volume filter.
(Still haven't verified whether the replaygain code works correctly.)
af_volume is deprecated, and so are its replaygain sub-options. To make
it possible to use replaygain without deprecated options (and of course
to make it available at all after af_volume is dropped), reintroduce
them as top-level options.
This also means that they are easily changeable at runtime by using them
as properties. Change the "volume" property to use the new update
mechanism as well.
We don't actually bother sharing the implementation between new and
deprecated mechanisms, as the deprecated one will simply be deleted.
For the from_dB() functions, we mention anders' copyright, although I'm
not sure if a mere formula is copyrightable. This will have to be
determined later.
This whole change is mostly untested. Our distributed human CI will take
care of it.
Close the audio device if there is no audio track (or stream) in the
current file. It will be opened again if the next file should contain
audio.
Signed-off-by: Marko Hauptvogel <marko.hauptvogel@googlemail.com>
Signed-off-by: wm4 <wm4@nowhere>
This drops support for the old libavcodec APIs. Now FFmpeg 3.3 or FFmpeg
git is required. Libav has no release with the new APIs yet, so for
Libav git as of a few weeks or months ago or so is required if you want
to use Libav.
Not much actually changes in hwdec_vaegl.c - some code is removed, but
the reindentation inflates the diff.
@@ -54,49 +86,49 @@ local function update_filter()
pretty='\n('..table.concat(pretty,', ')..')'
end
mp.command(string.format('no-osd af add @%s:lavfi=[acompressor=%s]; show-text "Dynamic range compressor: enabled%s" 4000',filter_label,table.concat(graph,':'),pretty))
mp.commandv('show-text','Dynamic range compressor: enabled'..pretty,o.osd_timeout)
@@ -130,7 +130,6 @@ static int init(struct ao *ao)
switch(ao->format){
caseAF_FORMAT_U8:
caseAF_FORMAT_S16:
caseAF_FORMAT_S24:
caseAF_FORMAT_S32:
caseAF_FORMAT_FLOAT:
break;
Loaded 100 of 516 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Kevin Mitchell